shakes said:Elaborate on inexpensive and little. What repairs would you like to attempt, and what is your budget?
jayman said:Is there a good websight or company that sells the kind of things i could use to try my hand at building an inexpensive little repair lathe?
-Thanks, Jay-
Cuesavvy said:
Thanks for the link. I saw this article, it is cool and it inspires other possibilities, using the same principles.shakes said:Cool site! For taig parts they seem to have standard prices, you can get that directly from www.taigtools.com. However, I would have suggested www.cartertools.com to get a 10% discount on everything except the motors. Not to mention you can get a lot of ideas of how to modify your taig to help with the cuemaking.
Check these lathes out. With one like this and a 12x36 wood lathe, you will have all the capabilities you want. I have a Speedway Series 7x12, sold by Homier (discontinuedjayman said:Those are some very helpfull sights, I have learned that none of the small lathes are adequte for doing cue repairs in a user friendly way, or at all, But......
It seems that from Ive heard since I started considering buying or biulding one, That there will be some small decent cue lathes coming out of china in a couple years, and that some of them are supposed to be pretty cool machines.
I like the taig mini lathe but with a tiny little bore of 5/16" through the head stock I would have to start doing pencil repairs instead of cues....Thus the hightower modification..... Plus they dont offer a bed extensoin......Thus the hightower modification.....
And since I dont want to spend a lot, I will probably wait for an inexpensive lathe that can already handle these minor differences to hit the market.
A lot of folks have jurry rigged there way around the intaquite abilitys of the mini lathes, But by the time theyr through, they may have been better off buying a hightower or something simmilar to begin with.
Thanks evryone, I think I'll wait till the market cathches up with demand. I can still do almost anything i want to with my simple equipment, when i take the next step up I want it to made for the cue repair application so i dont have to rigg it to to what it needs to.
-Jay-
Now that one is a lot better than some of the others, it has a 3/4'' bore which eliminates the toughest hurdle so far. Now you got me thinking again.RSB-Refugee said:Check these lathes out. With one like this and a 12x36 wood lathe, you will have all the capabilities you want. I have a Speedway Series 7x12, sold by Homier (discontinued). All of these lathes come from the same factory, so shop around for best pricing. Look at the spec sheets, some importers do have some upgrades.
Tracy