Lathe Pins

cueman

cueman

AzB Silver Member
Silver Member
It has been almost 20 years since I introduced the Lathe Pins to the cue repair market. Before then all the repair guys were spinning shafts on joint screws. What a nightmare that was. I now have five threads in them. 5/16-14, 5/16-18, 3/8-10, Cue Tech/Scorpion style and The Radius/Ball Screw. They are $12 each or $50 for all five. Well probably 20 years late is better than never, as I now have the Female half to the Lathe Pins for spinning butts. I have all four except the Cue Tech style. They are $12 each or $40 for all 4.
 
Last edited:
Hey Chris, How about a photo of each set? Thanks, Martin


cueman said:
It has been almost 20 years since I introduced the Lathe Pins to the cue repair market. Before then all the repair guys were spinning shafts on joint screws. What a nightmare that was. I now have five threads in them. 5/16-14, 5/16-18, 3/8-10, Cue Tech/Scorpion style and The Radius/Ball Screw. They are $12 each or $50 for all five. Well probably 20 years late is better than never, as I now have the Female half to the Lathe Pins for spinning butts. I have all four except the Cue Tech style. They are $12 each or $40 for all 4.
Click to expand...
 
cueman said:
It has been almost 20 years since I introduced the Lathe Pins to the cue repair market. Before then all the repair guys were spinning shafts on joint screws. What a nightmare that was. I now have five threads in them. 5/16-14, 5/16-18, 3/8-10, Cue Tech/Scorpion style and The Radius/Ball Screw. They are $12 each or $50 for all five. Well probably 20 years late is better than never, as I now have the Female half to the Lathe Pins for spinning butts. I have all four except the Cue Tech style. They are $12 each or $40 for all 4.
Click to expand...


Chris are they same kind (round shank) as what's comes with the lathes? If so that's a good price. I can center the males alot easier then the 3 sided sets I paid alot more for somewhere else. I could use the females to go with them, so I will be in touch soon. i need some other stuff too. I can't make them that nice Myself, especially for 12 bucks each.:)
 
I haven't taken any pictures of them. But the Lathe Inserts are Brass with 1/2" shank and 3/4" shoulder for the cue to bottom out on. The Lathe Pins are the same stainless ones I have been selling for years with the 3/4" shoulder and 3/8" shank.
 
Heres a few pics of the ones I got from Chris with my Deluxe....Hope this helps..................Dave

lathe-pins.jpg

tenon-threader.jpg
 
Last edited:
nbll01 said:
Heres a few pics of the ones I got from Chris with my Deluxe....Hope this helps..................Dave

lathe-pins.jpg

lathe-pins-2.jpg

tenon-threader.jpg

group.jpg
Click to expand...
I just want to make one clarification here. The three stainless pins and the tenon threader are my products. The brass things at the bottom appear to be Brianna's products.
 
Sorry for the confusion Chris I edited the pics so if you want to remove the ones that arent yours..............Dave
 
You must log in or register to reply here.
Back
Top