linen wrap "fix" help needed...

[pescadoman]

Have a friend who used some water to clean her butt(refrain from more than 5 jokes please and make them good).

Anyway, it ran down onto the linen, causing it to raise. Haven't done anything with linen yet and am wondering if razor blade laid parallel to wrap while spinning would make it all smooth again.

The raise is about 1/8 wide and runs length of wrap.

 

[Paul Dayton]

Don't do the razor blade. Just wet the entire wrap and press it back down. If necessary you could starch the wet wrap but that is usually not necassary.

 

[KJ Cues]

Tap, tap.
End of story.

 

[breakin8]

If you have lathe spin the butt. Use a oak board to press if you don't have a wrap press.I also use a little spray starch.

 

[pescadoman]

Don't do the razor blade. Just wet the entire wrap and press it back down. If necessary you could starch the wet wrap but that is usually not necassary.

Thanks, I'll try that.

Thanks to BHQ for suggesting the same thing.

You guys are great.

 

[Cue Crazy]

Yep try repressing It before doing anything else.

 

[cuejo]

I would start by cleaning the wrap first, then press, sand lightly with a little 600, starch , iron and done.......she will be happy with the result