LTB 3/8x10 pins

Dave38

theemperorhasnoclotheson
Silver Member
I'm looking for a supplier for 3/8 x 10 flat with .308 minor dia. Stainless and brass. I already know about prathers and atlas, and Bryan Mordt is out of them. Just wondering if there is anyone else that supplies them. Please pm me. Thanks,
Dave
 
Thanks Terry. I already use his pins, but only for the A joint. I am actually looking for center drilled / self aligning pins with the flat .308 minor similar to this but in stainless and brass:
js17.jpg
I can go with the .312 minor, I just wanted to try the smaller one.
Thanks everyone for the pm's and phone calls.
Dave
 
No problem Dave. I like his 3/8thx10 pins. They work well for me and the price is right.

If anyone should follow the link I provided, a word of warning.
I bought a bunch of his 5/16th x 14 pins and inserts. Nothing wrong with them aesthetically. But, the pins he provides with them fit those inserts but if you try and screw the insert onto any other pin from another cue, they don't want to go.
The inserts are not tapped to the top. I just ran a tap thru them and they
work just fine, but it doesn't look great. I will use them for sneaky house cue conversions, they are good for that.
 
I have one of bryans titanium ones if you just needed one.
 
Last edited:
No problem Dave. I like his 3/8thx10 pins. They work well for me and the price is right.
.
I like them also, but the other ones weight a tad more and I like the center hole for using a live center. Right now I have to drill my pins out to get that. The last batch I got from him, they had an oily dirt residue on tham that wasn't coming off easily, so I bought the large ultrasonic cleaner w/heat from HF and used a degreaser and they came out bright and shiny after 3 sessions of 8 minutes each with heat.
Dave
 
Back
Top