making a Sleeved joint

[CavinTan]

It all depends on what you want for a final product.

View attachment 532608

That's nice!

im planning to do this on a mezz. SS has an id of about 16-17mm. outer is 21.4mm

 

[Michael Webb]

Love the black phen in there too.

Thank you. The white joint is Ivory. I did it this way because I didn't want ivory against stainless. Turned out well.

 

[bstroud]

I used the black phenolic under an Ivory sleeve for years because I found I had no cracked Ivory joints with this method.

Bill Stroud

 

[CavinTan]

Thank you. The white joint is Ivory. I did it this way because I didn't want ivory against stainless. Turned out well.

Not exactly what i was asking in the OG thread,but similar to what you've posted...

link to the build here



Rest in peace Bill S.

 

[Michael Webb]

Not exactly what i was asking in the OG thread,but similar to what you've posted...

link to the build here
View attachment 700127


Rest in peace Bill S.

3 plus years later. Lol
If you can turn the stainless joint safely down to .750, assuming the joint on the cue is finished .840 and you don't damage the inner construction of the stainless joint. Good epoxy will hold. If your turning down a stainless sleeve or as hits em hard stated, a Schon. You'll lose the stainless.
Anything else? 0r do we come back to this thread is 2026/27
Have a nice day!

 

[DaveK]

3 plus years later. Lol

Cue maker time

Dave (somebody had to say it )

 

[CavinTan]

3 plus years later. Lol
If you can turn the stainless joint safely down to .750, assuming the joint on the cue is finished .840 and you don't damage the inner construction of the stainless joint. Good epoxy will hold. If your turning down a stainless sleeve or as hits em hard stated, a Schon. You'll lose the stainless.
Anything else? 0r do we come back to this thread is 2026/27
Have a nice day!

Haha, sorry. Just wanted to share some pics that was similiar to your uniloc joint you posted

 

[Michael Webb]

Haha, sorry. Just wanted to share some pics that was similiar to your uniloc joint you posted

All good Mr. Tan
Did you make the change?
Results?

 

[CavinTan]

All good Mr. Tan
Did you make the change?
Results?

i'll leave this one alone for now.. do not have a metal lathe anymore