new bludworth machinery

B

blud

AzB Silver Member
Silver Member
After much work and getting the new CNC saw/Lathes out there,one that has 4 blades fulll blown CNC and the other one, is a single headed CNC one that will fit on a 10" table saw.Both have done well for us. Were still taking orders, for both.

Now, were working on two more machines.

One will be a new CNC 4-axis mill, for parts and pockets.It will have 6 leveling bolts to keep it level, square rails with bearings to match, that will last for 2million inches of travel before they need to be replaced, also with a real nice vacuum pump and vacuum station for holding down parts while being machine cut, 4- axis, with a gantry system that is a low profile type, [ much closer tolorances than tall ones], 30" of X travel, with 2" Y with 4" for the Z .....It also has a steady rest to hold the middle of the cue "STEADY", while cutting the female pockets. I refuse to build this machine and install a cheap spindle. It will have an NSK spindle. Computer included with software installed.
It will come in around $8,500.00.. killer machine


Next is our new repair and cue building lathe, smooth cross slide as well as saddle slide, 1-5/16 spindle hole, up to 4 taper bars, with 2 motors one to control the spindle and the other one to control the saddle speed.It will accomdate a 30" cue with no problems.Also a steady rest for holding up long cues such as house cues for ferrule and tip work.
This will come in at around $ 5,500.00. kick-butt machine.

We still offer courses for cuemaking and cue repair. We also teach cad drawing and G-Code work.We design many cues for other cuemakers as well as do there Cad work. If interested, please call my son, Donald or me [blud] @ 830-232-5991.


Training is included with the purchase of our machinery.

We will soon have new video tapes on cuemaking and cue repair.Stay tuned. Were just so busy, we can't get to everthing at this time.

PLEASE REMEMBER, were here to help one and all.

Most of you folks know of our machinery. It's first class, and willl last you a long time.

We "NOW",going to offer a 3 machine package for---------------------- $15,995.00,

The 3 machines are,
1.- saw/lathe for your table saw, as of Jan. 1st,list for ----------------$3,750.00
2.- new CNC 4-axis milling machine for parts and pockets, list for ------$8,500.00
3.- the new repair and cue building lathe, list for ----------------------$5,500.00
total of for these 3 machines, list @, -------------------------------$17,750.00.
By purchasing all 3 at the same time you save -----$1,755.00-----.

We also offer lease financing if you want to save your ready cash. We also offer lease financing for new comers, meaning a new start up business....This is good to around $13,500.00.

Thanks for your time.call if you want 830-232-5991 and or e-mail me @

poolcues@hctc.net
blud
 
Last edited:
showing of machinery @ the Expo

Hi Mike, yes, sir. I hope to have several new machines, including a new leather jig, and a few more goodies, to introduce at the expo.. Working hard to bring new stuff on board, day in day out.
About time don't you think?
blud
 
all them high tech terms,,,,,,,,,,,,,,,,,bet youd have made a good snake oil salesman blud,,,,,,,,,,,,,,,,,,,,,,,,,,,,,lol
 
jigs

Michael Webb said:
Look forward to seeing the machines, I've seen enough leather jigs. I'm a little old fashion when it comes to that, especially at that rediculous price their selling for.
OKAY, I'm a lot old fashion.
Click to expand...
Mike, as you know, my stuff is not the "norm" that others come with.

My leather jig works very well and is easy to use, and will sell for around $150.00.

Old fashion or not, it's the nutts....[ nothing wrong with change, as long as it's a chance to up-grade].
blud
 
blud said:
Mike, as you know, my stuff is not the "norm" that others come with.

My leather jig works very well and is easy to use, and will sell for around $150.00.

Old fashion or not, it's the nutts....[ nothing wrong with change, as long as it's a chance to up-grade].
blud
Click to expand...
Leonard, When would you expect the jigs to be available?
 
leather jig

TellsItLikeItIs said:
Leonard, When would you expect the jigs to be available?
Click to expand...
The proto type leather jig, is at my friends shop in Houston. Around the middle of Jan. we should be receiving them back, and soon after shipping them out.
blud
 
blud said:
The proto type leather jig, is at my friends shop in Houston. Around the middle of Jan. we should be receiving them back, and soon after shipping them out.
Click to expand...
Hey Blud, is it going to ship with instructions, or a video?

Tracy
 
jig

RSB-Refugee said:
Hey Blud, is it going to ship with instructions, or a video?

Tracy
Click to expand...
Hi Tracy, Pictures will come with it, and HOW TO, explained on paper, with diagrams. It's really simple, that's why it's a lot less expensive than the others. Don't believe in gouging folks to survive...
blud
ps call me when you get time.
830-232-5991
 
blud said:
Don't believe in gouging folks to survive...
blud
ps call me when you get time.
830-232-5991
Click to expand...
That's appreciated. I would have bought one sometime back, but I just believe the asking price is too high on certain ones. I don't mind paying a fair price for anything, but dang!!!!

If you wouldn't mind, I would like to call you early next week to talk more on it (I promise not to take up too much of your time).
 
call

TellsItLikeItIs said:
That's appreciated. I would have bought one sometime back, but I just believe the asking price is too high on certain ones. I don't mind paying a fair price for anything, but dang!!!!

If you wouldn't mind, I would like to call you early next week to talk more on it (I promise not to take up too much of your time).
Click to expand...
Call today if you like? I'm here with Janice all weekend....
blud
830-232-5991
 
blud said:
Hi Tracy, Pictures will come with it, and HOW TO, explained on paper, with diagrams. It's really simple, that's why it's a lot less expensive than the others. Don't believe in gouging folks to survive...
blud
ps call me when you get time.
830-232-5991
Click to expand...
Tap, tap, tap Blud.
Ouch to those who paid $450+ for their jigs.
 
call anyway!

TellsItLikeItIs said:
I'll call next week. I'm not going to disturb you on a weekend day. Thanks though.
Click to expand...
No problem calling me sat, or sunday, just call, I can sit and relax on the phone, visit for a while, during the week it's hard to get me at the shop an or on my sometimes on my cell
830-232-5991 home/office
830-796-1610 cell
da blud
 
jigs

JoeyInCali said:
Tap, tap, tap Blud.
Ouch to those who paid $450+ for their jigs.
Click to expand...
Hi Joey, after they see my jig, most of those who spent 450 plus will have now 600 plus tied up in leather jigs, and the high dollar one, sittin on the shelf, collectin dust, and they be usin the 150 jig. REALLY
rock-on
blud
 
parts

Michael Webb said:
Blud
If someone has to replace a part on the lathe can it be purchased at a place like MSC, or are you the only supplier of parts.
Click to expand...
Mike, the only thing that I can think of, is motors, switches, and bearings, everything else we build or have built. The owner will be given a complete parts list and where and how to buy them.Motors, switches and bearings are the only thing I buy for these machines, the rest as stated, we build or have built. We will care a complete inventory of all parts. [ not many required btw].
The machine will be gurranteed for one year, under normall usage. The motor, switches, are for normally 90 days, which I get as an OEM, from my suppliers.

BTW, my machine can be running one direction and you can hit the wrong direction switch and go the wrong direction and it dosen't kill the board, motor, or fuses, it's just like the little pink rabbit, it keeps going and going and----------------

With my vast experences not only building, but repairing cues for over 30 years, I have designed and built the ultimate machine for all of us. I know what it takes. Work with ease, confidence, gain respect from customers, and make good money in the process.

BLUDWORTH CUE MACHINERY, designed and built by a CUEMAKER for all CUEMAKERS.............

Thanks for the good questions, sir.
blud
 
Last edited:
blud said:
We "NOW",going to offer a 3 machine package for---------------------- $15,995.00,

The 3 machines are,
1.- saw/lathe for your table saw, as of Jan. 1st,list for ----------------$3,750.00
2.- new CNC 4-axis milling machine for parts and pockets, list for ------$8,500.00
3.- the new repair and cue building lathe, list for ----------------------$5,500.00
total of for these 3 machines, list @, -------------------------------$17,750.00.
By purchasing all 3 at the same time you save -----$1,755.00-----.

blud
Click to expand...

Blud, you are making it very easy for anyone to make pool cues.
Good thing or bad thing, who knows. Glad to see you getting out there and doing it.

Perhaps it is time for me to give it a go.
 
chokenstroke said:
Blud, you are making it very easy for anyone to make pool cues.
Good thing or bad thing, who knows. Glad to see you getting out there and doing it.

Perhaps it is time for me to give it a go.
Click to expand...
Thanks, Jack, just let me know?

blud
 
Last edited:
weight

Michael Webb said:
Do you have any idea yet, what the weight of the lathe will be.
Click to expand...
Mike, it should fall around 175 to 200 lbs. A little heavier than the one your using now, but more stable, and a lot closer tolorances.

blud
 
blud said:
Mike, it should fall around 175 to 200 lbs. A little heavier than the one your using now, but more stable, and a lot closer tolorances.

blud
Click to expand...
Can you taper and cut points with this machine Blud?
I'm assuming it does like the Porper lathe except with a lined-up tailstock ( the new Porpers are kaka :eek: and are no longer favored by many ).
Kinda sukks for me since I already bought a portable lathe and taper machine.
 
You must log in or register to reply here.
Back
Top