Nice Andy Gilbert for Sale

Mike Templeton

Mike Templeton

Confidence........
Silver Member
OK Folks, I gave Andy's cues a try, and I just can't get used to the shaft taper. Take a look at this Gilbert I have for sale. I bought the cue from Cue Addicts about 3 weeks ago, so Sean could also be PM'd for comment on this cue. There is still a description on their site. Here is the link. http://www.cueaddicts.com/gilbert3.htm It is the second cue down on the page.

There are a couple of things wrong with the description on their site. In the description, they say that it has 4 veneers (yellow/orange/red/purple) when it actually has 5 (yellow, orange, red maroon, purple). I am adding a closeup of the name and veneers in a separate pic. Their ad also says that it has ivory ferrules, but they are Andy's linen based ferrule material. I know it's a cliche, but the pics don't do the cue justice. It has a nice ebony forearm, and the 5 bloodwood points are awesome. The veneers give the points a fire (almost demonic) look. It's a unique looking cue. I love the cue, but Andy's taper gets too thick a little too quickly for my taste. The joint is ivory, and the hit on the cue is great. Cueaddicts had it listed on their site for $960 which I think is list from Andy. I played with the cue about a week before I figured out that I could not get used to the shaft taper. I have had the cue put up since then.

I'm having other pics taken this week. I'll post them as soon as I can. I'm asking $825.

Mike
 

Attachments

  • GilbertName.JPG
    GilbertName.JPG
    91.6 KB · Views: 517
  • GilbertName2.JPG
    GilbertName2.JPG
    70.9 KB · Views: 435
Last edited:
scruggsinhand said:
nice cue....interested in any trades or looking for anything else?

thanks
brian/scruggsinhand
Click to expand...
Brian,

I would be intrested in trades. Whacha got????????

I'd like something a little lower end and a little to boot. I seem to do better with plain janes. Any interesting trade offers considered.

Mike
 
Mike Templeton said:
OK Folks, I gave Andy's cues a try, and I just can't get used to the shaft taper. Take a look at this Gilbert I have for sale. I bought the cue from Cue Addicts about 3 weeks ago, so Sean could also be PM'd for comment on this cue. There is still a description on their site. Here is the link. http://www.cueaddicts.com/gilbert3.htm It is the second cue down on the page.

There are a couple of things wrong with the description on their site. In the description, they say that it has 4 veneers (yellow/orange/red/purple) when it actually has 5 (yellow, orange, red maroon, purple). I am adding a closeup of the name and veneers in a separate pic. Their ad also says that it has ivory ferrules, but they are Andy's linen based ferrule material. I know it's a cliche, but the pics don't do the cue justice. It has a nice ebony forearm, and the 5 bloodwood points are awesome. The veneers give the points a fire (almost demonic) look. It's a unique looking cue. I love the cue, but Andy's taper gets too thick a little too quickly for my taste. The joint is ivory, and the hit on the cue is great. Cueaddicts had it listed on their site for $960 which I think is list from Andy. I played with the cue about a week before I figured out that I could not get used to the shaft taper. I have had the cue put up since then.

I'm having other pics taken this week. I'll post them as soon as I can. I'm asking $825.

Mike
Click to expand...

Price drop to $750. This is a practically new, $1000 Gilbert. Hopefully someone will take me up on it. If not, I'm headed to Ebay.

I should have the other pics by the end of the week.

Mike
 
The joint is ivory, and the hit on the cue is great. Cueaddicts had it listed on their site for $960 which I think is list from Andy.
I'm having other pics taken this week. I'll post them as soon as I can. I'm asking $825.

can you show me the whole picture of the cue pls can't find it in cueaddicts website lolz..
 
Last edited:
The Beginner said:
The joint is ivory, and the hit on the cue is great. Cueaddicts had it listed on their site for $960 which I think is list from Andy.
I'm having other pics taken this week. I'll post them as soon as I can. I'm asking $825.

can you show me the whole picture of the cue pls can't find it in cueaddicts website lolz..
Click to expand...
Jun,

I will try to have the pics on tomorrow. Thanks for looking. Try this link again. http://www.cueaddicts.com/gilbert3.htm ...2nd cue down.

Mike
 
Last edited:
Mike Templeton said:
OK Folks, I gave Andy's cues a try, and I just can't get used to the shaft taper. Mike
Click to expand...
Instead of selling a great cue, why don't you have the shafts modified until you get them the way you want them?
 
Mike Templeton said:
I'd like something a little lower end and a little to boot. I seem to do better with plain janes. Mike
Click to expand...

Sent a PM -> re: a classic designed BCM, two shafts, nice ring work, not too fancy. Meets your description of "a little lower end" (and I'll make up the difference in $ or M&Ms).

-td
 
gilbert pics for Mike

All, here are the scans of the prong and butt sleeve sections. We had deleted the links to the high-res off the site already. This is really a great looking cue...one of those darker cues that just don't scan well. Has to be seen and held to really appreciate its look.

It should be signed "Gilbert 05" as we picked it up just before the EXPO in March. The cue was designed by our site partner Jeff Horton.

Sean
 
cueaddicts said:
All, here are the scans of the prong and butt sleeve sections. We had deleted the links to the high-res off the site already. This is really a great looking cue...one of those darker cues that just don't scan well. Has to be seen and held to really appreciate its look.

It should be signed "Gilbert 05" as we picked it up just before the EXPO in March. The cue was designed by our site partner Jeff Horton.

Sean
Click to expand...
His photos show 06!!!
 
Too much Tv

I think its the advent of all those CSI / Law and order shows.

Mike Templeton said:
Jedi,

I looked at the cue last night. It is '05 but it does look like '06 in a way. Very perceptive.

Mike
Click to expand...
 
cue

Mike Templeton said:
Jedi,

I looked at the cue last night. It is '05 but it does look like '06 in a way. Very perceptive.

Mike
Click to expand...
Hey mike,does the cue have the 3 B taper????????? 3 budweiser taper!!!!!!!! The taper goes back 9 inches then 9 inches then 9 inches, someone should tell him about that 3 B taper. Its' a shame that he puts out shafts like that,even the material for ferrules isn't the best or right kind. He does great work but the shafts, you get the shaft. The Skunk.
 
Last edited:
shaft taper

Mike Templeton said:
OK Folks, I gave Andy's cues a try, and I just can't get used to the shaft taper. Take a look at this Gilbert I have for sale. I bought the cue from Cue Addicts about 3 weeks ago, so Sean could also be PM'd for comment on this cue. There is still a description on their site. Here is the link. http://www.cueaddicts.com/gilbert3.htm It is the second cue down on the page.

There are a couple of things wrong with the description on their site. In the description, they say that it has 4 veneers (yellow/orange/red/purple) when it actually has 5 (yellow, orange, red maroon, purple). I am adding a closeup of the name and veneers in a separate pic. Their ad also says that it has ivory ferrules, but they are Andy's linen based ferrule material. I know it's a cliche, but the pics don't do the cue justice. It has a nice ebony forearm, and the 5 bloodwood points are awesome. The veneers give the points a fire (almost demonic) look. It's a unique looking cue. I love the cue, but Andy's taper gets too thick a little too quickly for my taste. The joint is ivory, and the hit on the cue is great. Cueaddicts had it listed on their site for $960 which I think is list from Andy. I played with the cue about a week before I figured out that I could not get used to the shaft taper. I have had the cue put up since then.

I'm having other pics taken this week. I'll post them as soon as I can. I'm asking $825.

Mike
Click to expand...
Mike send the shafts to Pete Tascarella ,he'll work his magic for you. The Skunk.
 
know it all said:
....Its' a shame that he puts out shafts like that,even the material for ferrules isn't the best or right kind. He does great work but the shafts, you get the shaft. The Skunk.
Click to expand...


Skunk,

Just to clarify things, you're posting your personal preferences about his shafts, right (with respect to shaft taper and ferrule material)? For people that don't know, he does have other tapers that can be done when ordering a cue, but his standard taper is a little meaty and does produce a hard hit.

We've sold many, many Gilbert cues and the majority of players who bought them seem to really like the hit of his standard taper shafts.....but as we all know, hit is "very subjective". Retapering them is a great option if the hit isn't exactly what you want. [you can always take meat off, but you can't put it back]

Also, the ferrule material can't be too bad...as many cuemakers including South West uses it.

P.S. I'm not attacking your 'opinion' at all, so please don't take this reply that way. Just sounded a little harsh and thought it warranted some kind of reply with 'my opinion'.

Sean
 
cueaddicts said:
Skunk,

Just to clarify things, you're posting your personal preferences about his shafts, right (with respect to shaft taper and ferrule material)? For people that don't know, he does have other tapers that can be done when ordering a cue, but his standard taper is a little meaty and does produce a hard hit.

We've sold many, many Gilbert cues and the majority of players who bought them seem to really like the hit of his standard taper shafts.....but as we all know, hit is "very subjective". Retapering them is a great option if the hit isn't exactly what you want. [you can always take meat off, but you can't put it back]

Also, the ferrule material can't be too bad...as many cuemakers including South West uses it.

P.S. I'm not attacking your 'opinion' at all, so please don't take this reply that way. Just sounded a little harsh and thought it warranted some kind of reply with 'my opinion'.

Sean
Click to expand...
Sean,

You are correct in your assessment. I seem to be in the minority on the shaft taper. Everyone that I have talked to loves Andy's tapers. I have relatively small hands and fingers, so maybe that fact makes me prefer a longer taper. I would never say anything negatively about Andy's cues at all. I think they are great. And I may take yours and Ted's opinions and have the shafts re-tapered.

Thanks for all of you help adding the pics.

Mike
 
You must log in or register to reply here.
Back
Top