Not Pool Table Related, but WOODWORKING!! Learning to TURN!
- Thread starter trentfromtoledo
- Start date
Here are my technic 1210m3d turntables w/SureM44-7 cartridges & needles and my Urei 1601E Dj mixer. I run JBL LS305 powered Bookshelves with a powered 300 watt Beheringer Sub. DBX GORACK for processing/compression/limiter/EQ. I been using Sony MDR-V700 headphones for years and years.
I WOULD LOVE TO HAVE A SET OF THOSE BAD MOFO HEADPHONE'S! WOW I bet they sound awesome!!!!
TFT
P.s. I have one of the rarest collections of Florida Breaks AKA Funky Breaks ANYWHERE... So many independent releases were 500 or less runs and are hard to find. Once most people went digital I started buying collections, gutting the GEMS out of them and resold the rest.
PSS>I got to DJ with my all time favorite Breaks Producer DJ ICEY!! DJFUNKIN28 aka Trent from Toledo
Last edited:
Butane extraction system??
coolidge
Well-known member
Vacuum thermoforming machine. It holds a 24x24 inch sheet of plastic. Quartz heating elements at the top. I was molding parts out of pretty thick ABS sheet hence the dual vac pumps with reserve vacuum tanks to pull that thick stuff down over the mold.
it was my best guess!!! we have a badass 3d printer now at my partners shop, we can use just plastic, Kevlar or carbon fiber or any combo of the 3.
You are a very very interesting person! I like this thread. I like learning about other people who post on here. Hope more will participate!
TFT
coolidge
Well-known member
I do not want the DARK SIDE OF ANYTHING!!! I work on the BRIGHT SIDE
MY BROTHERS AND I ARE KNIGHTS!! God is our leader!!!TFT
Most of my machines are older than me and i'm not young anymore
Most of them are not pretty, either, but they sure are rugged and well tuned.
And _very_ well tooled up.
"space, the final frontier"
I've posted other work in the cue section: Post # 354, lady's desk.
Replacement church window, for one that rotted out.
(No relation to arches above.) Most of the stuff i make has curves in it. Church window has 9 different moulding profiles counting inside and outside trim. Knives ground to match the old work.
smt
Most of them are not pretty, either, but they sure are rugged and well tuned.
And _very_ well tooled up.
"space, the final frontier"
I've posted other work in the cue section: Post # 354, lady's desk.
Az Members who build their own cues please post photo's of your new and old work!!!!
Hello, I am certain that their are a large number of AZ Members who build their own cues. I have not seen a thread to date where everyone posted photo's of their work. This thread could kinda be used as a trade mark index of cue makers that post...
forums.azbilliards.com
Replacement church window, for one that rotted out.
(No relation to arches above.) Most of the stuff i make has curves in it. Church window has 9 different moulding profiles counting inside and outside trim. Knives ground to match the old work.
smt
Last edited:
You are a wildman! Hope you are well sir!Most of my machines are older than me and i'm not young anymore
Most of them are not pretty, either, but they sure are rugged and well tuned.
And _very_ well tooled up.
"space, the final frontier"
I've posted other work in the cue section: Post # 354, lady's desk.
Az Members who build their own cues please post photo's of your new and old work!!!!
Hello, I am certain that their are a large number of AZ Members who build their own cues. I have not seen a thread to date where everyone posted photo's of their work. This thread could kinda be used as a trade mark index of cue makers that post...forums.azbilliards.com
Replacement church window, for one that rotted out.
(No relation to arches above.) Most of the stuff i make has curves in it. Church window has 9 different moulding profiles counting inside and outside trim. Knives ground to match the old work.
smt
Thanks, Trent
{quote] wildman[/quote]
I take that as a verrrrry high compliment, coming from you!
Sorry about the pix - apparently that dropbox/MWdropbox went out of business after 20+ years, just a few days after i posted.
Glad some of you saw them, and thanks for the wonderful appreciation.
smt
{quote] wildman[/quote]
I take that as a verrrrry high compliment, coming from you!
Sorry about the pix - apparently that dropbox/MWdropbox went out of business after 20+ years, just a few days after i posted.
Glad some of you saw them, and thanks for the wonderful appreciation.
smt
I take that as a verrrrry high compliment, coming from you!
Sorry about the pix - apparently that dropbox/MWdropbox went out of business after 20+ years, just a few days after i posted.
Glad some of you saw them, and thanks for the wonderful appreciation.
smt
[/QUOTE]
I have been on a Break from AZB, I saw you post them. I appreciate your participation on the thread!!! Post up more anytime!!! I am headed to shop tomorrow for some work, Making a shadow box display for a Brunswick Master Stroke Cue I gave to the Owner of Miscue here in Toledo, it needs a special place in the pool room. I will post pics as its done!!!
TFT
Beautiful piece, well done !!!!Most of my machines are older than me and i'm not young anymore
Most of them are not pretty, either, but they sure are rugged and well tuned.
And _very_ well tooled up.
"space, the final frontier"
I've posted other work in the cue section: Post # 354, lady's desk.
Az Members who build their own cues please post photo's of your new and old work!!!!
Hello, I am certain that their are a large number of AZ Members who build their own cues. I have not seen a thread to date where everyone posted photo's of their work. This thread could kinda be used as a trade mark index of cue makers that post...forums.azbilliards.com
Replacement church window, for one that rotted out.
(No relation to arches above.) Most of the stuff i make has curves in it. Church window has 9 different moulding profiles counting inside and outside trim. Knives ground to match the old work.
smt