OLD STYLE TITLIST Conversion by TowBoy

jkmarshall_cues

jkmarshall_cues

AzB Silver Member
Silver Member
Very Nice Texas ToeBoy old style Titlist conversion. Great veneers!! Butt weighs 15.7 oz and is 28 3/4" in length and is 1.270" on end of butt sleeve. Pin is 5/16-14 stainless steel and joint is also stainless steel. Shaft 1 with inked lines on joint end is 29" and weighs 4.3 oz. Shaft 2 is also 29" and weighs 4.1 oz. Joint areas are 0.839, and both shafts are 13.00++ mm with linen based ferrule material. Shaft 1 has maybe 1/32" of role in middle, both shaft 2 and butt are dead nuts straight. Together cue is straight with either shaft, other than ever-so-slight of role out on shaft 1. Cue weighs 20.0 oz with shaft 1 & weighs 19.8 oz with shaft 2. Cue looks much nicer up close, sorry for the lousy pics. Not sure of the wood in lower butt area. Any guesses??

John



P1120150-1.jpg

P1120149.jpg

P1120148.jpg

P1120141-1.jpg

P1120142.jpg

P1120143.jpg

P1120144-1.jpg

P1120145-1.jpg

P1120146-1.jpg

P1120147.jpg
 
Last edited:
GincoAlves

Hay Mr John,
Above and below. Just guessing!
My toeboy was a dead ringer for a Balabushka. That cue will hit a ton.
I have a sneakie with a simular looking wood. It is the bottom cue. The thin bands look like tulipwood.



IMG_2519.jpg





Nick :)
 
Last edited:
thought it looks more like one of those palmer cues plastic material they often use in the butt sleeves or joint collar.

Its a pretty cue. Do you play with it?
 
You must log in or register to reply here.
Back
Top