Pocket nails

[JSS]

Looking for some 14 or 16 gage aluminum or brass pocket nails with a 1/4" dia round head 1" long that will not nick the balls. Thanks

 

[TheTablePro]

If you're a mechanic or retailer, you can purchase through dick at Billiard Wholesalers. See item # 5021 on the bottom of this page to see if they're what you need: http://www.billiardwholesalers.net/Coin-Op.html

Robin

 

[PoolTable911]

If you're a mechanic or retailer, you can purchase through dick at Billiard Wholesalers. See item # 5021 on the bottom of this page to see if they're what you need: http://www.billiardwholesalers.net/Coin-Op.html

Robin

Here is another place to get them.
http://www.penguinamusement.com/details.php?pid=pocket_nails

 

[PUTT4DACA$$H]

In my opininion the nails you use are not as critical as how they are installed.
Make sure to take the time to use a punch or small hammer and set the heads BELOW the surface of the plastic or rubber. Ive had good luck using oversized nails when the holes are reamed out by taking linemans pliers and snipping off some of the length and then nailing them in properly.
obviously less options with some coin-op pocket types

Good Luck,
Gordon Graham
425-275-8255
Las Vegas