Poison Pin and Inserts
- Thread starter Mase
- Start date
Roy,
I believe this is what you are looking for.
http://www.cuestik.com/store/product.asp?DEPARTMENT_ID=96&ITEM_ID=6008
As a side note, I believe that Ryan has suggested that the original Uni-Loc QR insert can be bored to accept the Bullet pin as they both use the same thread. Could be worth a try if you have the orig. inserts on hand.
Hope this helps and sorry if it doesn't.
I believe this is what you are looking for.
http://www.cuestik.com/store/product.asp?DEPARTMENT_ID=96&ITEM_ID=6008
As a side note, I believe that Ryan has suggested that the original Uni-Loc QR insert can be bored to accept the Bullet pin as they both use the same thread. Could be worth a try if you have the orig. inserts on hand.
Hope this helps and sorry if it doesn't.
Thanks KJ. I will try boring the originals and see how I make out.
One more bastard pin.
As if we don't have enough.
Sorry, I hate bastard pins.
As if we don't have enough.
Sorry, I hate bastard pins.
I agree!!! For a 100 years four pins sufficed and now in the last 10 there has to be at least 25 now all asserting that their pin design makes their cue superior to all others. I say hockey puck!
Dick
You're just pissed that you didn't buy Uni-Loc stock when it was under $2. :rotflmao1:
It's not too late to get in though. You know it's only going to go higher.
That Radial thing looks to be a winner considering everyone and their brother wants to copy it or make their own version.
Anyway, the 4 pins you mentioned. I'm seeing 10, 14 & 18.
What's your 4th? The wood thread?
It's not too late to get in though. You know it's only going to go higher.
That Radial thing looks to be a winner considering everyone and their brother wants to copy it or make their own version.
Anyway, the 4 pins you mentioned. I'm seeing 10, 14 & 18.
What's your 4th? The wood thread?
5/16-12 with an insert. Brunswick and some others used it in the earlier part of the 20th century when they mostly put pins in the shafts. The 5/16-12 got fazed out which left the three stated from the mid part of the century until Kershenbrock decided to start experimenting and upset the apple cart.
Dick
Bastard pins have been around for as long as I can remember.
I remember 3/8X13 in some cue from the 50's, An original Harvey Martin with a 3/8X8 brass pin, 5/16X13 in a Brunswick cue. But in todays pins, I think something has gotten lost, shanked pins with minimum threading on them, Some with no threads just pushed in, the one in this thread that is just short. Are the thoughts going backwards or just getting lazy?