Pre-Order Your Full Splice Blanks Now - Limited Supply

Cuemaster98 · Oct 19, 2006

These sample will be available in the late week of December, just in time for Christmas!!! These Prices are for pre-order only!! When the stock arrives in December the prices will be increased!!.

These beautiful full splice blanks are all oversize running at .96 plus to 1.30 plus at butt end.

Blank Models #1 - 6 are mostly for snooker cues but blank sample #5 and #6 can be made with birdeye maple for pool cue.

Model 5 and 6 are real ebony with butterfly splice points per pic.

10 for $550 for Blank Model #5
10 for $700.00 for Blank Model #6

These full splice blanks have tight grain birdeye maple forearm with 4 points and veneers into South American Rosewood:

10 for $649.99 for Blank Sample SRA, SRB, SRD, SRE, SRG, SRH
QtY Available: SRA - 50, SRB - 50, SRD - 50, SRE - 50, SRG - 50, SRH - 50

10 for $699.00 for blank sample SRC - Buska Veneers
QtY Available: SRC - 100

We also have a special order of short splice blanks with highly fiqured birdeye forearm with 4 ebony points and buska veneers that pre joined with a tight grain handle and 4 inch ebony butt sleeve.

5 for $449.00 for blank sample SE -A
QtY Available: SE - A: 25

8 Points Full splice blanks Model ER8- A and ER8- C are

10 for $850.00 for ER8 - A and ER8 - C
QtY Available: ER8-A: 70, ER8 - C: 40

The 8 points blanks can also be custom made with the same color veneers combination as sample model SRA to SRH.

We will also make Full Splice Blanks with your own color veneers combination and woodbase but a minimum Order of 50 blanks are required for the 4 points Full splice and 20 blanks are required for the custom 8 points full splice.

Pricing will depend on the type of forearm (Birdeye or straight grain) and butt wood used (Standard is south american rosewood, ebony, bocote, cocobola,purple heart, etc). Please email us for special pricing. We will make 4, 6, or 8 points full splice custom blanks per order.

Please note, quantity are limited and those with pre-order request and previous customers that have purchased previous batch of 10 blanks will have priority to these limited supply.

Please Note: An email will be sent shortly to previous Buyers of our F/S blanks with Special Pricing.

To make a pre-order request, please send us a paypal payment deposit for $100.00US specifying in your payment description the Model you would like to order and quantity. Any questions should also be directly to Duc at dlam0718@gmail.com.

Canadian cue · Oct 20, 2006

Do the blanks have a sealer of some sort on them? How have they been stored? I could be interested but I live in a climate which is fairly dry most of the year so I am a little concerned about the possibility of them twisting up after sitting for a while.

Cuemaster98 · Oct 20, 2006

Hi, All the wood have been cured to about 6% to 8% moisture, plus these blanks are oversize so it will allow you to cut and turn them down to perfect.

Regards,
Duc.

nbll01 · Oct 20, 2006

Duc,

Are these the same blanks Ive seen before in your other posts? It might be the picture but it looks to me like a lot of the blanks have points that are missing the tips. No matter how far you turn it down it will never have a sharp point if this is the case. Exactly how oversized are these blanks? Could you be more specific in size please? Dave

Cuemaster98 · Oct 20, 2006

Hi Dave,

The 8 points are bad example as both are chip on the points (the will not be like this) ...but all the other full splice are perfect. I've listed the size in the description already...don't know how exact you want. 1 inch at the forearm and 1.3 inch at the butt and cue is 29Inch. Let me know if this answer your question.

Regards,
Duc.

Cuemaster98 · Oct 24, 2006

Hi Guy,

Just a quick updates on our inventory as we have people that have already paypal us a deposit. We are expecting more to come by the end of this week!

10 for $649.99 for Blank Sample SRA, SRB, SRD, SRE, SRG, SRH
QtY Available: SRA - 45, SRB - 45, SRD - 45, SRE - 45, SRG - 45, SRH - 45

10 for $699.00 for blank sample SRC - Buska Veneers
QtY Available: SRC - 80

5 for $449.00 for blank sample SE -A
QtY Available: SE - A: 22

8 Points Full splice blanks Model ER8- A and ER8- C are

10 for $850.00 for ER8 - A and ER8 - C
QtY Available: ER8-A: 77, ER8 - C: 39

PLease Note: You are welcome to Mix and Match from the selection for your order of 10 blanks.

Cuemaster98 · Oct 25, 2006

8 Points Full Splice

Hi, I'm been informed that the 8 points full splice are suppose to look like that because it oversize. The point are not sharp at this stage. You will not see the sharp points until it's taken down to size. It's important to keep your centre true on these blanks...or you points will not be even. I'm sure the experience cue maker will not have any problem with these.

Regards,
Duc.

nbll01 · Oct 25, 2006

Duc

I would agree with the experienced part but no amount of experience can put a broken tip back on a messed up blank. If its broke off its off. Good luck with the sales Dave

Cuemaster98 · Oct 25, 2006

Hi Dave,

I don't think you understand... that how they look when the wood are place on the blanks. We have turn the exact blank down and I will take pics to show you and all the points are sharp. I think you probably don't understand how the blanks are put together. The blank are round at this point, so when you taper down to size the circular dimension changes depth with the taper..so the point will become sharper. At first, I thought the tips broke off myself but becuase I'm not a cuemaker so it's a novice mistake. My guys in the shops showed me when they tapered the blanks down and then I understood what they meant. When you see the pics..maybe you will understand. Are you a cuemaker?

Regards,
Duc.

nbll01 · Oct 25, 2006

Duc

I understand what you are saying completely. The tips of the points are still down in the channels (v grooves). I simple stated that if the tips are broken or ripped out and Im not saying that yours are then the blanks are no good. Ive seen some blanks posted on here before and the tips were broken or ripped out thats all. The ones your showing look fine from what I can tell!

Dave

01rkclassic · Oct 27, 2006

nbll01 said:
Duc,

Are these the same blanks Ive seen before in your other posts? It might be the picture but it looks to me like a lot of the blanks have points that are missing the tips. No matter how far you turn it down it will never have a sharp point if this is the case. Dave

i see what you are saying,third blank from the left half of the point is gone and the second and third from the right are missing the tips also

Cuemaster98 · Oct 27, 2006

Hi, The third blank from the left is a butterfly splice and I think that how they look oversized. The last 2 8 points on the right of the pics are also oversized. I have the pics of the 8 points turned down and it look beautiful...will post today. Been really busy lately.

Regards,
Duc.

dzcues · Oct 28, 2006

nbll01 said:
Duc

I would agree with the experienced part but no amount of experience can put a broken tip back on a messed up blank. If its broke off its off. Good luck with the sales Dave

Hi Dave,

Maybe the 4 pictures at the bottom of this page: http://www.dzcues.com/point_blanks.htm will help make clear what Duc is trying to say. If the blanks are oversized, the points will get sharper as material is removed. Hope this helps.

Cuemaster98 · Nov 3, 2006

Here are some images of the blanks taken down to final size. You will notice that the 8 points are now sharp!!

Pre-Order Your Full Splice Blanks Now - Limited Supply

Cuemaster98

AzB Gold Member

Canadian cue

AzB Silver Member

Cuemaster98

AzB Gold Member

nbll01

Albrecht Custom Cues

Cuemaster98

AzB Gold Member

Cuemaster98

AzB Gold Member

Cuemaster98

AzB Gold Member

nbll01

Albrecht Custom Cues

Cuemaster98

AzB Gold Member

nbll01

Albrecht Custom Cues

01rkclassic

Cell - 937-554-5637

Cuemaster98

AzB Gold Member

dzcues

newbie

Cuemaster98

AzB Gold Member