R6 Schon made by B Runde. 😎

[toomanybugs]

R-6 Schon, by the master Bob Runde w/2 dash ring shafts.

Black-blue/grey veneers in sharp points. New black linen wrap with white specs. I don’t know did the refinish on this, but it’s too sweet to play with, so it’s time for a new owner.

Left shaft is original with cue with Westinghouse Micarta Ferrule (yellowing is from the asbestos/and has a real solid hit). Black tip with clear backing 12.56mm. Butt w/Shaft = 19.3LB

Right shaft is new from Schon. 12.94mm. Butt w/shaft = 19.3LB.

Will Post on eBay Monday, so let’s make a deal now.

Best deal over $2000+3 Day UPS. (PayPal FF)
For Sale only with 48 States Mainland of USA.

 

[Kickin' Chicken]

R-6 Schon, by the master Bob Runde w/2 dash ring shafts.

Black-blue/grey veneers in sharp points. New black linen wrap with white specs. I don’t know did the refinish on this, but it’s too sweet to play with, so it’s time for a new owner.

Left shaft is original with cue with Westinghouse Micarta Ferrule (yellowing is from the asbestos/and has a real solid hit). Black tip with clear backing 12.56mm. Butt w/Shaft = 19.3LB

Right shaft is new from Schon. 12.94mm. Butt w/shaft = 19.3LB.

Will Post on eBay Monday, so let’s make a deal now.

Best deal over $2000+3 Day UPS. (PayPal FF)
For Sale only with 48 States Mainland of USA.

Is this an auction sale or do you have a price at which it is a sale?

heck of a nice cue and glwys

 

[toomanybugs]

My price is $2200 plus Shipping cost for 3-day delivery by UPS or FedEx.

I am within 15 miles or Longmont, Colorado

 

[Davidl]

19.3 LB huh? That's an awful HEAVY cue.

 

[toomanybugs]

19.3 LB huh? That's an awful HEAVY cue.

Silly me, need more sleep. As the picture says, 19.3 OZ. Thanks for correcting me.

 

[toomanybugs]

The Road Agent, I purchased this from said: “I was told the R-6 was refinished and rewrapped by Proficient Billiards.”

Really don’t want to sell it on eBay, thus I will extend listing two more days (4-10-2024 5pm MST).

Black-blue/grey veneers in sharp points. New black linen wrap with white specs. It’s too sweet to play with, so it’s time for a new owner.

Left shaft is original with cue with Westinghouse Micarta Ferrule (yellowing is from the asbestos/and has a real solid hit). Black tip with clear backing 12.56mm. Butt w/Shaft = 19.3LB

Right shaft is new from Schon. 12.94mm. Butt w/shaft = 19.3LB.

$2200 plus $$ your choose of 3 day postage via UPS or FedEx. Payment via PayPal.

 

[Kickin' Chicken]

The Road Agent, I purchased this from said: “I was told the R-6 was refinished and rewrapped by Proficient Billiards.”

Really don’t want to sell it on eBay, thus I will extend listing two more days (4-10-2024 5pm MST).

Black-blue/grey veneers in sharp points. New black linen wrap with white specs. It’s too sweet to play with, so it’s time for a new owner.

Left shaft is original with cue with Westinghouse Micarta Ferrule (yellowing is from the asbestos/and has a real solid hit). Black tip with clear backing 12.56mm. Butt w/Shaft = 19.3LB

Right shaft is new from Schon. 12.94mm. Butt w/shaft = 19.3LB.

$2200 plus $$ your choose of 3 day postage via UPS or FedEx. Payment via PayPal.

Can you please comment on the straightness of all pieces both together and apart?

Thx.

 

[toomanybugs]

Can you please comment on the straightness of all pieces both together and apart?

Thx.

Best to my knowledge rolling the items on my Brunswick Table, shafts roll straight with or without butt attached. Pics are attached, videos to large for AZB?
Small tapper gap at center of shaft, on original and new shaft from Schon.

 

[Shooter08]

Best to my knowledge rolling the items on my Brunswick Table, shafts roll straight with or without butt attached. Pics are attached, videos to large for AZB?
Small tapper gap at center of shaft, on original and new shaft from Schon.

Make a video of rolling it with the joint hanging over the rail. If someone can explain it better please do.

 

[markitekt]

Put the cue on the rail of the table, with the joint touching the rail and the butt on the table and the shaft hanging over the table. Roll the cue and see how much wobbly wobble there is at the cue tip. You're welcome.

 

[toomanybugs]

Put the cue on the rail of the table, with the joint touching the rail and the butt on the table and the shaft hanging over the table. Roll the cue and see how much wobbly wobble there is at the cue tip. You're welcome.

Thank you for all your input. But you didn’t tell me how to post video of on this website. The files were too large to upload.

This cue and others Runde’s, in my vault are headed to eBay. I may post the info on eBay actions page here on AZB.

Respectfully yours, Adam

 

[markitekt]

Thank you for all your input. But you didn’t tell me how to post video of on this website. The files were too large to upload.

This cue and others Runde’s, in my vault are headed to eBay. I may post the info on eBay actions page here on AZB.

Respectfully yours, Adam

You can try and upload the video on YouTube and provide a link to it.

 

[shoxy]

Is this for sale still?

I recently lost that exact R6 to a vehicle arson

 

[Bavafongoul]

If any of your Runde Schon cues have a different joint than 5/16x14 piloted, I look for ward to learning more or seeing pics of the cue(s) as I’m always interested in those.

 

[shoxy]

If any of your Runde Schon cues have a different joint than 5/16x14 piloted, I look for ward to learning more or seeing pics of the cue(s) as I’m always interested in those.

The R6 I had, I removed the stainless steel joint and replaced it with a Juma collar. I prefer the hit and dampening effect more. Couldn’t stand that clunk noise when steel get through the ball.

My cue also vibrated less with the Juma. Neat little trick to remove around an ounce of weight as well

 

[Bavafongoul]

The R6 I had, I removed the stainless steel joint and replaced it with a Juma collar. I prefer the hit and dampening effect more. Couldn’t stand that clunk noise when steel get through the ball.

My cue also vibrated less with the Juma. Neat little trick to remove around an ounce of weight as well

I completely concur…..that’s why my cues are flat faced, except for my Runde Schon and Palmer cues.

 

[shoxy]

Still trying to reach out to see if this is still available? I have DMed you and posted on this thread. Can you please get back to me? Very interested!!!!

 

[shoxy]

Does anybody know the OP who’s selling this cue? If possible, can you please direct me to his Facebook page or something?

I recently lost this exact cue to a vehicle arson and I’m devastated. Same 4 pointer R6 with Black Points. This is would mean a lot to me if somebody can make this transaction happen?

 

[mikemosconi]

The R6 I had, I removed the stainless steel joint and replaced it with a Juma collar. I prefer the hit and dampening effect more. Couldn’t stand that clunk noise when steel get through the ball.

My cue also vibrated less with the Juma. Neat little trick to remove around an ounce of weight as well

I have an older Meucci Oldie series cue- the " airplane " cue- 95-19. They came with SS joints, and at 20 ounces I could not get the weight bolt out- so I had Troy Downey do the same- change out the SS joint for a Juma joint- the cue looks great and plays great too with a much better overall cue balance now.

 

[shoxy]

This “Michael Andran” reached out to me, stating they are you OP.

For the safety of both parties and witnesses here. Is this you or just another scamming bum?