Schon, Help with model number

Wallace Bettes

Wallace Bettes

AzB Silver Member
Silver Member
Can anyone help with the model ## of this cue, and what it might be worth? it has 5 points each point looks black red black 4 ivory peices with long red arrows running through the center. the butt looks ebony with 5 res boxes with ivory and red spears. any help would be helpfull. Thanks
 
Last edited:
Wallace Bettes said:
Can anyone help with the model ## of this cue, and what it might be worth? it has 5 points each point looks black red black 4 ivory peices with long red arrows running through the center. the butt looks ebony with 5 res boxes with ivory and red spears. any help would be helpfull. Thanks
Click to expand...

Send the pix to Evan Clarke. He will get back to you. Email: info@schoncues.com

Value with one shaft when new would certainly have been at least $1050-1250, maybe a little more.

Soft market value now, probably $600-650 with one shaft...add an extra $75-100 or so for the second shaft, assuming everything is straight and finish is good, and shafts are near full size.

Just an opinion...
Joe
 
With so many different cue series and so many different eras of those series, unless someone has the same cue, I think your best bet is to ask Evan Clarke at Schon. You can reach him at: info@schoncues.com It might take a few days, but Evan always replies. Just curious.. is the Schon name anywhere on the shafts? If it's in the collar then it's from 1993 or so, written on the shaft would be from 1994 to present, and no name at all would be prior to 1993. That info could be of help to Evan as well.

Good luck, Chris.
 
Almost looks like a C13 model that CueStix sold in the 1996, except theirs had red blocks in the ring work instead of ivory. Hard to tell by your pictures, but the model I am referring to also had one red veneer in the points. Other than that they are almost a dead ringer.
 
You must log in or register to reply here.
Back
Top