Scruggs,Black,Block Lettered Joss and a Coker

Denny

Denny

Four Arms
Silver Member
I need to clean out my closet to make room.

First off is a Players cue from Scruggs with
nice inlays in the butt sleeve. Mircarta
5/16x14 joint. Shafts not sure if two are
from Tim as the color on the rings are a bit
lighter.
Butt 14.35
Diameter Weight
Shaft 1 12.84 3.89 (Unknown)
Shaft 2 12.80 3.75 (Unknown)
Shaft 3 12.08 3.82 (Original)
Refurbished locally. SOLD

Second is a Richard Black Player with 4 shafts
two from Richard and two from a local maker.
5/16x14 SS joint.
Butt 15.08 Diameter Weight
Shaft 1 12.6 4.09 (Original shaft does have a bad roll)
Shaft 2 13.0 3.96 (New from Richard)
Shaft 3 12.80 4.31 (Local maker)
Shaft 4 12.75 4.00 (Local maker)
Refurbished by Richard.SOLD

Third is another Richard Black After Six. There
is a glue issue in one of the points as seen in
the pics. 5/16x14 SS joint.
Butt 14.9
Diameter Weight
Shaft 1 13.15 4.0 (New from Richard)
Shaft 2 13.04 4.0 (New from Richard)
Shaft 3 11.65 3.56 (Original)
Refurbished by Richard SOLD

Fourth is a 73 or 74 Block Lettered Joss Hoppe.
4 point Ebony with green,mahogany,green,
mahogany veneers. 5/16x14 SS joint.
Butt 15.9
Diameter Weight
Shaft 1 12.6 3.82
Shaft 2 12.5 3.75
Shaft 3 12.5 3.75
Refurbished locally. Last is a Six point Coker. Babinga nose with 6 Birdseye
points. Birdseye butt sleeve with Babinga oval window
with Holly inlays. Ivory 3/8x10 joint.
Butt 15.5
Diameter Weight
Shaft 1 13.5 3.32
Shaft 2 13.5 3.96
All original. SOLD
PM me with email address for additional pics
 

Attachments

  • Pictures 293.jpg
    Pictures 293.jpg
    34.8 KB · Views: 1,393
  • Pictures 294.jpg
    Pictures 294.jpg
    34.4 KB · Views: 1,395
  • Pictures 296.jpg
    Pictures 296.jpg
    35.7 KB · Views: 1,387
  • Pictures 297.jpg
    Pictures 297.jpg
    35.8 KB · Views: 1,390
  • Pictures 298.jpg
    Pictures 298.jpg
    34.1 KB · Views: 1,369
Last edited:
More pictures

here are some more pics
 

Attachments

  • Pictures 147.jpg
    Pictures 147.jpg
    50.5 KB · Views: 1,328
  • Pictures 148.jpg
    Pictures 148.jpg
    43.3 KB · Views: 1,322
  • Pictures 277.jpg
    Pictures 277.jpg
    58.5 KB · Views: 1,308
  • Pictures 279.jpg
    Pictures 279.jpg
    87.3 KB · Views: 1,319
  • Pictures 280.jpg
    Pictures 280.jpg
    49.9 KB · Views: 1,304
more pics

More pictures
 

Attachments

  • Pictures 154.jpg
    Pictures 154.jpg
    39.5 KB · Views: 1,312
  • Pictures 155.jpg
    Pictures 155.jpg
    44.2 KB · Views: 1,289
  • Pictures 157.jpg
    Pictures 157.jpg
    33 KB · Views: 1,305
  • Pictures 333.jpg
    Pictures 333.jpg
    60 KB · Views: 1,303
  • Pictures 334.jpg
    Pictures 334.jpg
    40.4 KB · Views: 1,296
and some more pics

The Coker pics
 

Attachments

  • Pictures 284.jpg
    Pictures 284.jpg
    43.1 KB · Views: 1,270
  • Pictures 286.jpg
    Pictures 286.jpg
    41.6 KB · Views: 1,276
  • Pictures 287.jpg
    Pictures 287.jpg
    45.5 KB · Views: 1,281
  • Pictures 288.jpg
    Pictures 288.jpg
    48.4 KB · Views: 1,260
  • Pictures 289.jpg
    Pictures 289.jpg
    44.7 KB · Views: 1,269
More pics

Richard Black players
 

Attachments

  • Pictures 337.jpg
    Pictures 337.jpg
    45.4 KB · Views: 1,258
  • Pictures 339.jpg
    Pictures 339.jpg
    41.3 KB · Views: 1,259
  • Pictures 340.jpg
    Pictures 340.jpg
    45.5 KB · Views: 1,265
  • Pictures 342.jpg
    Pictures 342.jpg
    49.7 KB · Views: 1,276
Richard Black Cues

A couple of questions about the Richard Black cues. On the plain jane you list 3 shafts but show 4 in the pics. Does it come with the 3 as written, or 4? As for the Black with the point problem, did this occur before or after Richard refinished it? If before, was there no way of fixing the veneer? Lastly, is everything straight on both cues?

Thanks, Chris.
 
Denny said:
I need to clean out my closet to make room.

First off is a Players cue from Scruggs with
nice inlays in the butt sleeve. Mircarta
5/16x14 joint. Shafts not sure if two are
from Tim as the color on the rings are a bit
lighter.
Butt 14.35
Diameter Weight
Shaft 1 12.84 3.89 (Unknown)
Shaft 2 12.80 3.75 (Unknown)
Shaft 3 12.08 3.82 (Original)

Refurbished locally. $1200

Second is a Richard Black Player with 4 shafts
two from Richard and two from a local maker.
5/16x14 SS joint.
Butt 14.35
Diameter Weight
Shaft 1 12.84 3.89 (Unknown)
Shaft 2 12.80 3.75 (Unknown)
Shaft 3 12.08 3.82 (Original)
Refurbished by Richard. $900.

Third is another Richard Black After Six. There
is a glue issue in one of the points as seen in
the pics. 5/16x14 SS joint.
Butt 14.9
Diameter Weight
Shaft 1 13.15 4.0 (New from Richard)
Shaft 2 13.04 4.0 (New from Richard)
Shaft 3 11.65 3.56 (Original)
Refurbished by Richard $1000

Fourth is a 73 or 74 Block Lettered Joss Hoppe.
4 point Ebony with green,mahogany,green,
mahogany veneers. 5/16x14 SS joint.
Butt 15.9
Diameter Weight
Shaft 1 12.6 3.82
Shaft 2 12.5 3.75
Shaft 3 12.5 3.75
Refurbished locally. $1150.

Last is a Six point Coker. Babinga nose with 6 Birdseye
points. Birdseye butt sleeve with Babinga oval window
with Holly inlays. Ivory 3/8x10 joint.
Butt 15.5
Diameter Weight
Shaft 1 13.5 3.32
Shaft 2 13.5 3.96
All original. $500

PM me with email address for additional pics
Click to expand...

Devilish48 said:
A couple of questions about the Richard Black cues. On the plain jane you list 3 shafts but show 4 in the pics. Does it come with the 3 as written, or 4? As for the Black with the point problem, did this occur before or after Richard refinished it? If before, was there no way of fixing the veneer? Lastly, is everything straight on both cues?

Thanks, Chris.
Click to expand...

Chris pictures arent in order the Richard Black PLAYER its the cue in the last picture and shows 4 shafts and no points, other cue has points and glue issue.

GLWYS
Sean
 
Last edited:
21Gambler said:
Chris pictures arent in order the Richard Black PLAYER its the cue in the last picture and shows 4 shafts and no points, other cue has points and glue issue.

GLWYS
Sean
Click to expand...

I know. I didn't go in his order, but with the ones I had questions about that I was most interested in. Notice that my question about the 3 or 4 shafts is in regards to the plain jane.. or "players cue". I didn't ask about the number of shafts in the cue with the messed up point.

Chris
 
Devilish48 said:
I know. I didn't go in his order, but with the ones I had questions about that I was most interested in. Notice that my question about the 3 or 4 shafts is in regards to the plain jane.. or "players cue". I didn't ask about the number of shafts in the cue with the messed up point.

Chris
Click to expand...

I understand that but it clearly says 4 shafts 2 from Richard 2 from local maker, picture also shows 4 shafts, if you also note the specs for the Scruggs cue and the Richard Black PLAYER are exactly the same, he copied and pasted the specs and forgot to change the numbers and add specs for the 4th shaft would be my guess. I would ask for new specs for sure.

Sean
 
21Gambler said:
I understand that but it clearly says 4 shafts 2 from Richard 2 from local maker, picture also shows 4 shafts, if you also note the specs for the Scruggs cue and the Richard Black PLAYER are exactly the same, he copied and pasted the specs and forgot to change the numbers and add specs for the 4th shaft would be my guess. I would ask for new specs for sure.

Sean
Click to expand...

I see what you're saying now. I guess I'll find out whenever he looks at his thread again. I did think it odd that the original shafts for a Black and a Scruggs were both just a hair over 12mm =)

Chris
 
Sorry I screwed up on the specs. I'll fix it tonight the Black has 4 shafts.
I thought I had note that one shaft is as crooked as a dogs hind leg. The
others are straight.

Denny
 
You must log in or register to reply here.
Back
Top