shafts and cues for sale/trade

[scruggsinhand]

hello all

here are some shafts and cues i have lying around that need to go....dont like the price, make an offer...

A - vintage original "schon 13" shaft - 4.3 oz @ 13mm nice and straight $125

B - Mottey shaft - 4 oz @ 13mm tulip dash rings -ivory ferrule $175

C - 314 predator --new 3/8-10 w/black collar - $160

D - used 314 predator -- 5/16-14 w/ black collar and moori tip- $150

E - McDaniels cocobolo sneaky pete - $380 - SOLD if guy comes thru

F - McDaniels 5 pointer - 2 shafts 3.2 oz @ 12.75mm - 3.9 oz @ 12.75mm butt is 16.3oz - $600 - deal pending

G - new JOSS - has spliced points inlaid into the cnc points - 50 inlays 4.1oz @ over 13mm butt is 15.8oz $300

H - Jett - 4.2oz @ over 13mm, butt is 15.2oz, stack leather wrap, 3/8-10 pin, $325

J - MACE/rick howard - cue made for george breedlove in which he used for many years- 2 shafts -3.2oz @ 13mm- 3.4oz @ 12.9mm, butt is 16.2oz--nice looker and stiff hitting - southwest look and play for less than half the money- matching joint protectors! - $900

K - TS sneaky pete - not so straight playable shaft, butt is + in mint condition 4.3oz shaft - butt is 15.9oz - $360

L - gold letter "JOSS custom" - owned and used for many years by the late PERU PAUL/TALL PAUL BOWMAN- one the best players/gamblers to come out of indiana - 4.2oz @ 12.75mm butt is 14.4oz - loaded with inlays - make offer

M - TS - four point ebony into maple with veneers - this cue needs tlc- needs refinishing and a new shaft- shaft is warped, but good for the collar ringwork - has stack leather wrap - butt is 15.9 - make offer

N - Mottey jump cue - 3.9oz shaft @ 13.25mm, butt is 6.3oz - very rare piece - make offer

 

[Shorty]

What thread is the Mottey shaft?

Thank you,
Shorty

 

[cyrex]

Scruggs

Tried to PM about the 4pt Scruggs but your mailbox is full.

 

[cubswin]

Hey bring that gold letter Joss over wednesday if you would. I should be there, had to go to the fort wayne philharmonic last wednesday.

 

[scruggsinhand]

the Mottey shaft is 5/16-14 pin...sorry about that

sure Joe, i will bring that gl joss over....dont start drooling yet....lol

cyrex, go ahead there should be enough room now....

 

[cubswin]

Been looking for a joss I like for awhile, can't remember if I liked that one or not.

 

[scruggsinhand]

just refreshing the list..pics of M --TS 4pt are now attached....

A - vintage original "schon 13" shaft - 4.3 oz @ 13mm nice and straight $125

B - Mottey shaft - 4 oz @ 13mm tulip dash rings -ivory ferrule $175

SOLD--C - 314 predator --new 3/8-10 w/black collar - $160

SOLD--D - used 314 predator -- 5/16-14 w/ black collar and moori tip- $150

SOLD--E - McDaniels cocobolo sneaky pete - $380 - SOLD if guy comes thru

F - McDaniels 5 pointer - 2 shafts 3.2 oz @ 12.75mm - 3.9 oz @ 12.75mm butt is 16.3oz - $600 - deal pending

G - new JOSS - has spliced points inlaid into the cnc points - 50 inlays 4.1oz @ over 13mm butt is 15.8oz $300

H - Jett - 4.2oz @ over 13mm, butt is 15.2oz, stack leather wrap, 3/8-10 pin, $325

J - MACE/rick howard - cue made for george breedlove in which he used for many years- 2 shafts -3.2oz @ 13mm- 3.4oz @ 12.9mm, butt is 16.2oz--nice looker and stiff hitting - southwest look and play for less than half the money- matching joint protectors! - $900

SOLD--K - TS sneaky pete - not so straight playable shaft, butt is + in mint condition 4.3oz shaft - butt is 15.9oz - $360

L - gold letter "JOSS custom" - owned and used for many years by the late PERU PAUL/TALL PAUL BOWMAN- one the best players/gamblers to come out of indiana - 4.2oz @ 12.75mm butt is 14.4oz - loaded with inlays - $600

M - TS - four point ebony into maple with veneers - this cue needs tlc- needs refinishing and a new shaft- shaft is warped, but good for the collar ringwork - has stack leather wrap - butt is 15.9 - $750...put another 300 in this cue for a refinish and 2 shafts and you have a 1500 cue for around 1k...

TRADED--N - Mottey jump cue - 3.9oz shaft @ 13.25mm, butt is 6.3oz - very rare piece - make offer

 

[Bamacues]

...check your PMs...

 

[scruggsinhand]

bump....

schon 13 shaft sold

 

[Cuedog]

What's left?

Hey Brian,
Can you give an update as to what is still available or what has sold. Whichever is easier. Thanks.

 

[scruggsinhand]

UPDATED AGAIN >>>>Sure, this is the updated list...pics are in the top thread

AVAILABLE/buyer fell thru -----A - vintage original "schon 13" shaft - 4.3 oz @ 13mm nice and straight $125

B - Mottey shaft -mint/like new- 4oz @ 13mm tulip dash rings -ivory ferrule $175

SOLD--C - 314 predator --new 3/8-10 w/black collar - $160

SOLD--D - used 314 predator -- 5/16-14 w/ black collar and moori tip- $150

SOLD--E - McDaniels cocobolo sneaky pete - $380

F - McDaniels 5 pointer - 2 shafts 3.2 oz @ 12.75mm - 3.9 oz @ 12.75mm butt is 16.3oz - $600 - this is a very nice players cue!!!

G - new JOSS - has true spliced points inlaid into the cnc points - 50 inlays 4.1oz @ over 13mm butt is 15.8oz $300 - this cue retails for $575

H - Jett - 4.2oz @ over 13mm, butt is 15.2oz, stack leather wrap, 3/8-10 pin, $325

TRADED ------J - MACE/rick howard - cue made for george breedlove in which he used for many years- 2 shafts -3.2oz @ 13mm- 3.4oz @ 12.9mm, butt is 16.2oz--nice looker and stiff hitting - southwest look and play for less than half the money- matching joint protectors! - $900

SOLD--K - TS sneaky pete - not so straight playable shaft, butt is + in mint condition 4.3oz shaft - butt is 15.9oz - $360

L - gold letter "JOSS custom" - owned and used for many years by the late PERU PAUL/TALL PAUL BOWMAN- one the best players/gamblers to come out of indiana - 4.2oz @ 12.75mm butt is 14.4oz - loaded with inlays - $600

SOLD -------M - TS - four point ebony into maple with veneers - this cue needs tlc- needs refinishing and a new shaft- shaft is warped, but good for the collar ringwork - has stack leather wrap - butt is 15.9 - $750...put another 300 in this cue for a refinish and 2 shafts and you have a 1500 cue for around 1k...

TRADED--N - Mottey jump cue - 3.9oz shaft @ 13.25mm, butt is 6.3oz - very rare piece - make offer

 

[scruggsinhand]

updated again ----

UPDATED AGAIN >>>>Sure, this is the updated list...pics are in the top thread

AVAILABLE/buyer fell thru -----A - vintage original "schon 13" shaft - 4.3 oz @ 13mm nice and straight $125

B - Mottey shaft -mint/like new- 4oz @ 13mm tulip dash rings -ivory ferrule $175

SOLD--C - 314 predator --new 3/8-10 w/black collar - $160

SOLD--D - used 314 predator -- 5/16-14 w/ black collar and moori tip- $150

SOLD--E - McDaniels cocobolo sneaky pete - $380

F - McDaniels 5 pointer - 2 shafts 3.2 oz @ 12.75mm - 3.9 oz @ 12.75mm butt is 16.3oz - $600 - this is a very nice players cue!!!

G - new JOSS - has true spliced points inlaid into the cnc points - 50 inlays 4.1oz @ over 13mm butt is 15.8oz $300 - this cue retails for $575

H - Jett - 4.2oz @ over 13mm, butt is 15.2oz, stack leather wrap, 3/8-10 pin, $325

TRADED ------J - MACE/rick howard - cue made for george breedlove in which he used for many years- 2 shafts -3.2oz @ 13mm- 3.4oz @ 12.9mm, butt is 16.2oz--nice looker and stiff hitting - southwest look and play for less than half the money- matching joint protectors! - $900

SOLD--K - TS sneaky pete - not so straight playable shaft, butt is + in mint condition 4.3oz shaft - butt is 15.9oz - $360

L - gold letter "JOSS custom" - owned and used for many years by the late PERU PAUL/TALL PAUL BOWMAN- one the best players/gamblers to come out of indiana - 4.2oz @ 12.75mm butt is 14.4oz - loaded with inlays - $600

SOLD -------M - TS - four point ebony into maple with veneers - this cue needs tlc- needs refinishing and a new shaft- shaft is warped, but good for the collar ringwork - has stack leather wrap - butt is 15.9 - $750...put another 300 in this cue for a refinish and 2 shafts and you have a 1500 cue for around 1k...

TRADED--N - Mottey jump cue - 3.9oz shaft @ 13.25mm, butt is 6.3oz - very rare piece - make offer

 

[SirBanksALot]

Jett ?

updated again ----

Hello...is the Jett ebony ?

If its not too much trouble could you PM me better pictures of the butt sleeve and joint.

THANKS

 

[scruggsinhand]

Hello...is the Jett ebony ?

If its not too much trouble could you PM me better pictures of the butt sleeve and joint.

THANKS

i dont think the jett is ebony, i would bet it is wenge wood....it looks like cocobolo but very dark brown...maybe it is cocobolo...it has some nice grain to it tho....3/8-10 brass pin, ff wood to wood joint....

pics of the jett attached

 

[SirBanksALot]

Jett Cue

i dont think the jett is ebony, i would bet it is wenge wood....it looks like cocobolo but very dark brown...maybe it is cocobolo...it has some nice grain to it tho....3/8-10 brass pin, ff wood to wood joint....

pics of the jett attached

Jett? I seem to recall a cuemaker Bob Jett-is that who this is??

Or is it Joan Jett of Joan Jett and Blackhearts

Nice looking cue. How does it play?

 

[scruggsinhand]

Jett? I seem to recall a cuemaker Bob Jett-is that who this is??

Or is it Joan Jett of Joan Jett and Blackhearts

Nice looking cue. How does it play?

hey Keith

ya, its bobby jett.....out of florida i was told. not joan jett, not that she couldnt play with my cue, lol, but anyways.

this cue is handmade with inlays and rings, is straight, and has a 150 tiger stack leather wrap....so you are gettin the cue for a bill75...

ya...325 is firm...340 packed,shipped w/insurance

 

[billfishhead]

interested in Mottey jump cue,,,,,,,,,,,,,,,,pm me with pics please

 

[SirBanksALot]

hey Keith

ya, its bobby jett.....out of florida i was told. not joan jett, not that she couldnt play with my cue, lol, but anyways.

this cue is handmade with inlays and rings, is straight, and has a 150 tiger stack leather wrap....so you are gettin the cue for a bill75...

ya...325 is firm...340 packed,shipped w/insurance

The cue looks nice!!! How do I break it to my wife that I've sold two cues lately but am buying three!! I'll figure that part out.

Just think - if that cue was made by Joan Jett, I could send it back to her to
and have her check out my shaft....oh well. (You're not supposed to say that kind of stuff in this day and age - and I apologize!)

 

[SirBanksALot]

The cue looks nice!!! How do I break it to my wife that I've sold two cues lately but am buying three!! I'll figure that part out.

Just think - if that cue was made by Joan Jett, I could send it back to her to
and have her check out my shaft....oh well. (You're not supposed to say that kind of stuff in this day and age - and I apologize!)

I sent you a PM

 

[scruggsinhand]

update

JETT is now sold

here are the pics of the mottey jump, you requested billfishhead.....