South West, Gina, McWorter, Schon, Predator and bunch more custom cues available F/S

Cuemaster98

Cuemaster98

AzB Gold Member
Gold Member
Silver Member
Here's a few custom cues that I have available in my collections:

Here's my ebay links to them:
http://www.ebay.com/sch/cuemaster98...599&pt=LH_DefaultDomain_2&_trksid=p4340.l2562

1) 1999 South West custom cue with 2 Shafts $SOLD
"#405 99 Pau Ferro nose piece, 6 ebony pts with Gab Green and Purple Veneers.
Originally, 19.25oz, 2 shafts 12.75mm, Long Pro Taper, Double Butt Cap design"

Butt: 15.38oz, 3/8-11, linen wrap...dead straight
Shaft 1: 3.79oz, 12.72mm...dead Straight, MS Kamui.
Shaft 2: 3.73oz, 12.75mm...dead Straight, Hard 2nd Generation Moori.

Validated tip size with caliper.

Straightest SW that I've seen in a long while. Shafts have been re-condition is super smooth with new tips.

559991497_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/559991460_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/559991388_o.jpg


2) 1998 Dan Dishaw Custom cue with 2 shafts $SOLD

Butt: 15.36oz, Radial Pin, Phenolic Joint
Shaft 1: 3.88oz, 13mm, Hard Molavia Hybrid
Shaft 2: 3.68oz, 13mm, Champion Tip

Dead Straight together and apart.

559991354_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/559991324_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/559991290_o.jpg

3) High End 1998 Russ Espiritu New York Gallery Cue $SOLD
Butt: 17.56oz, Ivory Joint, 5/16-14 pin, 6 Ivory Point (3 high and 3 low) with Silver Veneers, solid Ivory Butt sleeves
(recently refinished by Russ) Cue was $6500 plus in 1998.
Come with 2 shafts, 12.85mm, hard treated le pro, 4.15oz and other shaft is 3.58oz, 13mm, hard le pro.
Both shafts and butt are straight. Together with the 12.85mm shaft, cue roll straight but with the 13mm the shaft has
a very slight roll (probably a facing issue as the shaft alone is straight).

561045810_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/561045800_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/561045826_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/561045818_o.jpg

4) High End Fancy Mcworter "Deco" custom cue: $SOLD!! shipped

5) Here's a lightly used beautiful custom Amboyna Burl hoppe style Jerry Rauenzahn cue for sales for only $No Longer Available).

Butt of the cue is 15.10oz, phenolic joint, 3/8-10 pin, brown leather wrap.
1 original shaft weigh in at 4.05oz, 12.75mm Hard Hybrid Molavia.
1 Fearless shaft weigh in at 3.65, 13mm Hard Molavia. (black collar)
Everything is straight together and apart.

I'll let the pics do the talking. PM me if you have questions.

[]http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/541673997_o.jpg[]


6) Beautiful Jerry Olivier 8 pts full splice cue with ivory joint, ivory butt cap and 3/8-10 pin.
Asking $1050.00 (firm) this is an amazing players cue.
The butt is made from one of my 8 pt full splice blank and one of Jerry personal shaft stock.
The shaft is curly and the whole cue just plays deadly.

The butt weigh in at 14.26oz with an ivory butt cap and Shaft is 3.45oz @ 12.8mm with Everest tip (now changed to a hard molavia).
The cue is light but shoot super solid. I've tested this cue and it's so easy to play with and move the ball with ease. The cue has that solid feel that everyone is looking for.

500417929_o.jpg


7) CM98 Wrapless John Davis cored Full Splice conversion cue with Ivory Joint: $1250.00

Butt: 16 oz, 5/16-14 pin with ivory joint, Amboyna burl hoppe ring, bumperless
S1: 4.50oz, 12.95mm, 30"
S2: 4.50oz, 13mm, 29.75"

497450881_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/497450906_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/497450930_o.jpg

8) High End Original Custom Falcon Cue: $1200.00 Reduced (Retailed over 2500 in 90's)

Here a super high end cue from Falcon that is adorned with exotic and bone inlays.
Cue Butt: 15.37oz, 5/16-14 pin with stainless steel collar, linen wrap
S1: 4.11oz, 13.1mm, Hard Hybrid Molavia
S2: 4.21oz, 13.05mm, Hard Hybrid Molavia

539445802_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/539445860_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/539445939_o.jpg

9) 1998 Ivory Pts Russ Espiritu with 2 shaft. (N/A)

This is a beautiful and sharp cue from Russ with Ivory Points and Inlays. The only blemish on this cue is that he silver ring seem to have raised through the finish. This can easily be remedy with refnish in the butt sleeves.

Butt: 5/16-14 pin with Stainless Steel collar, 15.83oz, leather wrap
S1: 3.77oz, 13mm
S2: 3.90oz, 12.90mm

10) I have this beautiful Fancy Longoni Pool cue "Indiano": $4300 Shipped.

Pics & Spec:

Pool Cue Butt: 16.23oz, silver joint collar with inlays, wrapless with unique inlays.

S1: 4.60oz, 12.9mm, Original Medium Moori, Westinghouse Micarta
S2: 4.45oz, 13mm, Hard Molavia, Ivory Ferrule.
S3: 4.30oz, 13mm, Hard Moori, Brand New.

Butt is straight but both shafts have very slight taper roll. Play super solid!!

Cue is now sent back to Italy for a complete refinish with a brand new shafts. Will be available in 6 weeks.

INDIANO
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/545978086_o.jpg


11) High End Gina 16A: $SOLD Shipped Express.

This cue has been used by the previous owner and does have some bumps and bruises in the finish through the cue but it's in very good condition per pics.

Butt: 15.88oz, Ivory Joint, fancy ring work (Silver,Ivory,Pearl), Ivory short point, ebony pts with 4 veneers(black, orange,yellow, maple), Ivory butt cap, signature leather wrap. Straight.

Forearm has a roll out due to the leather wrap. The butt is dead straight on the lathe. Here's a video showing and explaining the rollout: http://www.youtube.com/watch?v=0XM6AVGyurQ

Shaft1: 13mm, 4.12oz, Fancy ring work, layered tip
Shaft2: 13mm, 4.55oz, Fancy ring work, layered tip
Both shafts are straight and come with fancy joint protectors.

514553983_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/514553844_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/514553766_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/514554097_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/514554188_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/514554281_o.jpg

12) Joe Banks Titlist Full Splice Conversion cue: $1200.00

Here's beautiful and solid playing Titlist conversion by Joe Banks.
Butt is about 14.5oz, 5/16-14 Stainless Steel Collar, leather wrap and both shafts are 4.0oz plus with ivory ferrule and Moori tips.
All inlays are ivory and hoppe ring with Joe's name is also ivory.
Shafts are dead straight and butt is also very straight with very minor taper roll that less than the credit card thickness.
Together the cue roll flat.


559991046_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/559991004_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/559990956_o.jpg

PM me if you have any questions.

Thanks,
Duc.
 
Last edited:
Schons and Predators

Ok...here's also some schon and predator cues I picked up in a trade deals.

I have a newer STL19 available for sales.

Here's are the specs:

****1000.00******
STL17: Butt is 15.76oz, Irish Line wrap, 5/16-14 pin and SS, Straight
Shaft 1: 4.19oz, phenolic ferrule, 13mm, straight

Here's are the pics:
549590754_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/549590670_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/549590885_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/549590822_o.jpg

1996 custom Skip Weston cue: $1600.00

* first CNC cue by Skip Weston (cue direct from Skip was over 2K plus)
* Ivory joint 3/8-10 pin.
* Solid Snakewood butt sleeve with ivory inlays.
* Birdeye maple forearm with Snakewood points and ivory inlays
* The cue butt alone weigh in at 15.39 oz and both shafts are 3.70 oz (12.6 MM blue diamond tip and phenolic ferrule) and 3.64 oz (12.65 mm Hard Moori with ivory ferrule)
* The butt is straight and one of the shaft is straight while the other has a slight roll out...together the cue roll straight and tips are flat on the tables.
* Forearm and butt sleeve has 2 small finish chips otherwise cue is in very good condition.

556274262_o.jpg


556274177_o.jpg


556274225_o.jpg
 
Last edited:
Cuemaster98 said:
Here's a few custom cues that I have available in my collections:

Here's my ebay links to them:
http://www.ebay.com/sch/cuemaster98...599&pt=LH_DefaultDomain_2&_trksid=p4340.l2562

1) Purpleheart, Ebony Pts 2008 Southwest custom cue (# 337 08 38th cue) with AB rings. Asking $3850.00.
Butt and shafts are all straight together and apart. Butt weight in at about 15.90oz and both shafts are around 13mm at 3.7oz
No much else to said...it's a SW cue.

545978237_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/545978193_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/545978207_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/545978175_o.jpg

2) 1996 Pre Franklin Southwest cue w/ 2 shafts: $2600.00

Butt is around 16oz and shafts are about 3.5oz each 12.75mm Plus. Butt has a slight roll out in the forearm the common in SW cue and both shafts are straight. Forearm is birdeye maple and has 6 Goncalo alves points and butt sleeves. Cue is original and is very good condition with minor finish scuff only.

548463717_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/548463776_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/548463755_o.jpg

3) Jerry Mcworter 6pts Purpleheart player's cue: $1500.00
Butt: 3/8-10, phenolic joints, linen wrap, 15.38oz
Shaft 1: 12.88mm, hard moori, 3.31oz, very slight taper roll
Shaft 2: 12.9mm, Hard Hybrid Molavia, 3.54oz.
cue is straight together and apart.

545977982_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/545978012_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/545978073_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/545977963_o.jpg

4) High End Fancy Mcworter "Deco" custom cue: $3000 shipped

Super solid custom Jerry Mcworter player cue that plays much better than it looks and it look amazing!! Mcworter cues are getting really hot in the Market again so get this one while you still can. 2 potential buyers for this one...just waiting for one of them to confirm...but not solid.

This Jerry Mcworter custom ebony cue is adorned with his amazing silver lines work and exotic white inlays.

The id on the 2nd sapele "Deco" cue is 1716 * my code for the (87)

Sapele Deco butt: 15.79oz, 3/8-10 with phenolic joint, world renounce pig skin leather wrap

Shaft 1: 3.80oz, 12.75 mm, Kamui Balck M with phenolic ferrule,
Shaft 2: 3.77oz, 12.84 mm, Hard Molavia layer tip with Ivy ferrule,

533122572_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/533122551_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/533122541_o.jpg

5) Here's a lightly used beautiful custom Amboyna Burl hoppe style Jerry Rauenzahn cue for sales for only $1100.00 shipped (Reduced!!).

Butt of the cue is 15.10oz, phenolic joint, 3/8-10 pin, brown leather wrap.
1 original shaft weigh in at 4.05oz, 12.75mm Hard Hybrid Molavia.
1 Fearless shaft weigh in at 3.65, 13mm Hard Molavia. (black collar)
Everything is straight together and apart.

I'll let the pics do the talking. PM me if you have questions.

541673997_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/541673926_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/541674335_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/541673742_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/541673848_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/541673776_o.jpg

6) Beautiful Jerry Olivier 8 pts full splice cue with ivory joint, ivory butt cap and 3/8-10 pin.
Asking $1050.00 (firm) this is an amazing players cue.
The butt is made from one of my 8 pt full splice blank and one of Jerry personal shaft stock.
The shaft is curly and the whole cue just plays deadly.

The butt weigh in at 14.26oz with an ivory butt cap and Shaft is 3.45oz @ 12.8mm with Everest tip (now changed to a hard molavia).
The cue is light but shoot super solid. I've tested this cue and it's so easy to play with and move the ball with ease. The cue has that solid feel that everyone is looking for.

500417929_o.jpg


7) CM98 Wrapless John Davis cored Full Splice conversion cue with Ivory Joint: $1250.00

Butt: 16 oz, 5/16-14 pin with ivory joint, Amboyna burl hoppe ring, bumperless
S1: 4.50oz, 12.95mm, 30"
S2: 4.50oz, 13mm, 29.75"

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/497450881_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/497450906_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/497450930_o.jpg

8) High End Original Custom Falcon Cue: $1200.00 Reduced (Retailed over 2500 in 90's)

Here a super high end cue from Falcon that is adorned with exotic and bone inlays.
Cue Butt: 15.37oz, 5/16-14 pin with stainless steel collar, linen wrap
S1: 4.11oz, 13.1mm, Hard Hybrid Molavia
S2: 4.21oz, 13.05mm, Hard Hybrid Molavia

539445802_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/539445860_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/539445939_o.jpg

9) 1998 Ivory Pts Russ Espiritu with 2 shaft. $1700.00 o.b.o. (originally paid $2500.00 back in 1998)

This is a beautiful and sharp cue from Russ with Ivory Points and Inlays. The only blemish on this cue is that he silver ring seem to have raised through the finish. This can easily be remedy with refnish in the butt sleeves.

Butt: 5/16-14 pin with Stainless Steel collar, 15.83oz, leather wrap
S1: 3.77oz, 13mm
S2: 3.90oz, 12.90mm

521540130_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/521540148_o.jpg

10) I have this beautiful Fancy Longoni Pool cue "Indiano" that retail for over $4600.00 plus. Asking for $3000.00 but I'm also open to trade on this cue. Multiple cues and cash always considered.

Pics & Spec:

Pool Cue Butt: 16.23oz, silver joint collar with inlays, wrapless with unique inlays.

S1: 4.60oz, 12.75mm, Original Medium Moori, Westinghouse Micarta
S2: 4.45oz, 12.75mm, Hard Molavia, Ivory Ferrule.

Butt is straight but both shafts have very slight taper roll. Play super solid!!

INDIANO
545978086_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/545978096_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/545978106_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/545978145_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/545978132_o.jpg

AVP 2x6 leather Butterfly Case:

Looking for Best Offer as I don't know the value of this case.

Case is made by George Aronak from American Vinyl Products (AVP) in 2003 and the outer layer is made of leather and interior is blue velvet. Case is a 2x 6 shafts with some compartments. I was going to keep the case as it is so compact but decided now to let it go. I'm not sure the value of this case but I get a lot of inquiry about it!!!
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/541526758_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/541526795_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/541526844_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/541526906_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/541526952_o.jpg

[B][COLOR="Red"]11) High End Gina 16A: $7000.00 Shipped Express.[/COLOR][/B]

This cue has been used by the previous owner and does have some bumps and bruises in the finish through the cue but it's in very good condition per pics.

Butt: 15.88oz, Ivory Joint, fancy ring work (Silver,Ivory,Pearl), Ivory short point, ebony pts with 4 veneers(black, orange,yellow, maple), Ivory butt cap, signature leather wrap. Straight.

Forearm has a roll out due to the leather wrap. The butt is dead straight on the lathe. Here's a video showing and explaining the rollout: [url]http://www.youtube.com/watch?v=0XM6AVGyurQ[/url]

Shaft1: 13mm, 4.12oz, Fancy ring work, layered tip
Shaft2: 13mm, 4.55oz, Fancy ring work, layered tip
Both shafts are straight and come with fancy joint protectors.[IMG]http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/514553983_o.jpg

PM me if you have any questions.

Thanks,
Duc.
Click to expand...

Very beautiful cues Cuemaster98, wish you good luck with the sale.
 
Wow, what a incredible group of cues..................(especially the Gina :smile: )

Good luck with all your sales,
JimmyK
 
New pictures posted for Franklin SW along with updated specs for this cue.
Played with the Franklin SW and the cue plays sweet. I've cleaned both shafts and installed new tips (Old Medium Moori and Hard Molavia Hybrid).

My deal for Purpleheart SW fell through...so it up for sales again.

Lots of great playing cues on here!! I will be heading down to Valley forge so if you're interested in any of these cues please let me know and I'll bring them with me.

Regards,
Duc.
 
Specs are now updated for SW cues. Finally got a caliper that works so the tip size are updated.
 
Up to the top for some great playing cues!!! I will be playing at SBE so will have some of these cues available there for trade and sales.
 
Last edited:
CM98 8 pts full splice bumperless cue with 2 shafts

Ok...more pics added for the GINA cue and bumping for some really nice playing cues. I will be bring some of these to SBE so anyone interested in trading please let me know.
 
Up to the top for some really nice player's cues!!! If you like to see any of these cues at SBE, just call me at my cell 646-824-7092. I will have some of these cues available and will be at SBE from Thursday till Sat Night.

Regards,
Duc.
 
A few cues are sold but still a lot of great playing cues left. Will update thread with new cues shortly this week!!! check them out!!
 
Up to the top for some great cues!!! Got lots of offers on the 6 pts Mcworter and high end Mcworter. Almost a done deals so let see what happens.
 
You must log in or register to reply here.
Back
Top