Sugar Tree Shaft

Nine Ball

Certified Rail Tester
Silver Member
New Price... Must Go..

New Sugar Tree shaft. I had four of these and this is the last one left. Not much to say but how often do you see someone selling just a shaft of his.


Specs:

Brand new
Brown collar
0.845 at the joint on my calipers
A little over 13 mm on my calipers
3/8-10 thread
Weighs 4 ozs on my scale


xxx shipped & insured by Priority 2-3 day mail.. Shaft must go.. SOLD

For his standard Acme pin, I believe it is called. Looks like a SW pin style. Pictures added below of the pin. So make sure you have the right pin to fit the shaft. I was also told the shaft will fit some of the older 10 pins but I have no proof of my own to back that up.
 
Last edited:
Pictures

2003_0101SugarTree080022.jpg


2003_0101SugarTree080023.jpg


2003_0101SugarTree080024.jpg
 
Last edited:
Shaft has got to go. I have no cue to put it on. It's brand new and never been hit with. Send your PM's in..
 
Nine Ball said:
For his standard Acme pin, I believe it is called. Looks like a SW pin. So make sure you have the right pin to fit the shaft.

I'm not familiar with the pin Eric uses, but a 3/8x10 acme is a lot different than a SW pin, so you might need to clarify. An acme pin is noticeably flat on the outside surface of the threads where it's normally a sharper edge. A SW pin is 3/8x11, and has a relatively large distance between each thread where it's minor diameter is more exposed than most pins. Wish I could explain that better, but you should be able to find a picture of a SW pin on here easily.

Good luck. :)
Mr H
 
Mr Hoppe said:
I'm not familiar with the pin Eric uses, but a 3/8x10 acme is a lot different than a SW pin, so you might need to clarify. An acme pin is noticeably flat on the outside surface of the threads where it's normally a sharper edge. A SW pin is 3/8x11, and has a relatively large distance between each thread where it's minor diameter is more exposed than most pins. Wish I could explain that better, but you should be able to find a picture of a SW pin on here easily.

Good luck. :)
Mr H


However, If you look at the normal looking 10 pin you usually see.. McDermott for example, and then look at the 10 Acme you can understand why I said it looks like the SW style pin.




Here's a picture of a 3/8x10 Acme I used to own and below that is a picture of a 3/8x11 SW I used to own.

Joint.jpg


2006_0714Image0023.jpg
 
Last edited:
Mr Hoppe said:
The problem is that is not an acme thread. An acme thread looks like this.

Then what the heck are we debating over here? :p

I never said it was a SW pin. I said it looks like the SW style. As in not the normal 10 pin you usually see, Like McDermott.. So make sure you have the right pin.

Where did I go wrong in saying that? :confused:

I was also informed the shaft will fit some of the older 10 pins.. But I don't have any 10 pin cues to try it on.
 
Nine Ball said:
Then what the heck are we debating over here? :p

I never said it was a SW pin. I said it looks like the SW style. As in not the normal 10 pin you usually see, Like McDermott.. So make sure you have the right pin.

I think to most people an acme pin looks nothing like a SW pin as you can see from the pics above. I was confused when I read your description and I was just trying to help clarify for your potential buyers. I'll just mind my own business now. At least you got some free bumps out of the discussion.
Mr H
 
Mr Hoppe said:
I think to most people an acme pin looks nothing like a SW pin as you can see from the pics above. I was confused when I read your description and I was just trying to help clarify for your potential buyers. I'll just mind my own business now.
Mr H


I'm not upset with you.. Don't take it that way. :)

If I didn't know what an Acme pin was and someone said it looks something like a SW pin then I would have an idea of the shape/style on the pin.

I guess I'm not most people because I think it looks similiar to a SW pin style. and I have seen it called that many times. 3/8x10 SW style pin.
 
Last edited:
Nine Ball said:
I think it looks similiar to a SW pin style. and I have seen it called that many times. 3/8x10 SW style pin.

Is a 3/8x10 acme "SW style" pin like a philips "flat-head style" screw? :D ;)
 
Mr Hoppe said:
Is a 3/8x10 acme "SW style" pin like a philips "flat-head style" screw? :D ;)


Let me just ask this.. :) Is a McDermott 10 pin shaped the same as the 10 Acme pin?


If you had no idea what an Acme pin was and I said looks something like a SW style pin would you be able to have a visual picture on the "style" of the pin?

:D :D :D :D :D

Edited to add for Mr Hoppe:

Did I forget to tell you the 14 thread looks like the 18 thread with the exception on how it looks? :-) :-) :-)
 
Last edited:
Back
Top