Table issues

[smartguy]

My level reads dead on but when I shoot up the left side by the rail it turn towards the middle if the table. A ball gets to the middle part of the table it turns out. 3 piece slsate table, any help would be great. Thanks again, J
I have placed the level all over the table many different spots, using all different size levels.

 

[PoolTable911]

My level reads dead on but when I shoot up the left side by the rail it turn towards the middle if the table. A ball gets to the middle part of the table it turns out. 3 piece slsate table, any help would be great. Thanks again, J

What kind of level and what sze? Also are you just putting the level in the center of slate or left and right of center?

 

[smartguy]

I'm placing the level at many different spots and using different size levels.

 

[Ralph Kramden]

I'm placing the level at many different spots and using different size levels.

Probably not the cause, but maybe the slate has a slight warp.. or someone sanded a dip into the slate trying to match the slate seams.

If the cloth is stretched tight it may be showing a false level. The weight of a ball could roll over the low spot under the cloth and roll off.
.

 

[PoolTable911]

I'm placing the level at many different spots and using different size levels.

Are you useing machinist levels or carpentars levels? The differance is HUGE!

 

[Poolhalljunkie]

Level

http://www.ebay.com/itm/Starrett-No...887?pt=LH_DefaultDomain_0&hash=item20f6e7a9c7

Best to get a level like the one in the link above. also do your research on here. If you still want to get the best answers pictures of the table an a ball showing the trouble spot. or post a video on youtube and link to it. Also are you sure the frame is level?