Tournament LED light for pool table

songj2096

pool is not dead
Rating - 100%
6   0   0
Perimeter Billiard LED Light for Pool table

9 ft $579 shipped
Weight: 20lb
Brightness: 18000lm, average LUX 1028
Color temp: 5500k daylight white
Watts: 200w

8 ft for $519 shipped.
7 ft for $469 shipped.

The NEW Dimmable version is available now.
www.PerimeterBilliardLights.com

Pros: Light is evenly on the entire table, with no shadow or darkness at the edge and corner. Can be mounted higher than central light. The light in the pic is 80 inches from the ground.
Cons: There will be visible seams where the pieces are joined together. But can be solved by wrapping black tape or black silicon.
 

Attachments

  • 22.jpg
    22.jpg
    136.1 KB · Views: 275
  • 11.jpg
    11.jpg
    116.8 KB · Views: 237
  • 33.jpg
    33.jpg
    77.6 KB · Views: 237
  • 7.jpg
    7.jpg
    130.1 KB · Views: 240
  • 8.jpg
    8.jpg
    118.7 KB · Views: 249
  • IMG_7469.JPG
    IMG_7469.JPG
    125.6 KB · Views: 268
  • 30.JPG
    30.JPG
    169.8 KB · Views: 270
  • 31.JPG
    31.JPG
    134.5 KB · Views: 292
  • 20230512_105232.jpg
    20230512_105232.jpg
    173.6 KB · Views: 2
Last edited:

Belford

Registered
Rating - 100%
9   0   0
9 foot Tournament LED light
$449 shipped
Color:black / white / wood
Weight: 14lb
Hanging chain length: 78’’ adjustable
Brightness: 18000lm
Color temp: 5500k daylight white
Watts: 200w

8 foot for $419 shipped.

7 foot for $379 shipped.

Pros: Light is evenly on the entire table, no shadow or darkness at edge and corner. Can be mounted higher than central light. Light in the pic is 85 inch from the ground.
Cons: There will be small gaps between connections. But can be solved by wrapping black tapes.
What do you mean by "small gaps in connections"?
 

songj2096

pool is not dead
Rating - 100%
6   0   0
WPA request the bed and rails of the table must receive at least 520 lux of light at every point. This particular light offers average of 1028 LUX for the entire table surface (tested light fixture is 55'' from table cloth). Check your light if it meets the requirement.
 

jayburger

AzB Silver Member
Silver Member
Rating - 100%
19   0   0
WPA request the bed and rails of the table must receive at least 520 lux of light at every point. This particular light offers average of 1028 LUX for the entire table surface (tested light fixture is 55'' from table cloth). Check your light if it meets the requirement.
Looks great and led bulbs are never gonna need replaced ( well not in MY lifetime
 

Kevin Lindstrom

14.1 Addict
Silver Member
Rating - 100%
69   0   0
2 x 9ft left in stock ready to ship. There are more on the way..
3 questions.

1. Where do these ship from?

2. How much assembly is required.

3. I have a low ceiling and have 52" between the bed of my table and my drop ceiling. Will this distance properly accommodate this fixture above my 9 foot table.

Thanks

Kevin
 

songj2096

pool is not dead
Rating - 100%
6   0   0
3 questions.

1. Where do these ship from?

2. How much assembly is required.

3. I have a low ceiling and have 52" between the bed of my table and my drop ceiling. Will this distance properly accommodate this fixture above my 9 foot table.

Thanks

Kevin
1. For US orders mostly ship from California.
2. 1-2hours to install the light.
3. Recommend light height is 45-55'' from table surface. It sounds like you have a 82'' ceiling, it will work in your case. I have several customers with 82'' ceiling.
 

ideologist

I don't never exaggerate
Silver Member
Rating - 100%
173   0   0
3 questions.

1. Where do these ship from?

2. How much assembly is required.

3. I have a low ceiling and have 52" between the bed of my table and my drop ceiling. Will this distance properly accommodate this fixture above my 9 foot table.

Thanks

Kevin

I can talk through install as well, I just built one with 1" clearance between my garage door and the light, such a nice fit and great lighting
 

Kevin Lindstrom

14.1 Addict
Silver Member
Rating - 100%
69   0   0
1. For US orders mostly ship from California.
2. 1-2hours to install the light.
3. Recommend light height is 45-55'' from table surface. It sounds like you have a 82'' ceiling, it will work in your case. I have several customers with 82'' ceiling.
ok my interest has heightened. Next question can you post or email me close up pictures of the components either disassembled or assembled or both.

kevinlindstrom@msn.com
 
Top