Two butts wanted

[Double-Dave]

Hey guys,

I need two simple butts made for shafts I have. I'm not looking to spend too much money,
so an "up and coming" cuemaker might be best.
I can send the shafts to have the butts matched.

I need a one-piece purpleheart butt straight taper .900"-1.25" with a 3/8x10 G10 Pin.
The second butt would be for a jump cue, a 15" maple butt .87" at the joint 5/16x14 pin, preferably brown stained.

Feel up to the job? Can you get it done within a month or so? Send me a PM.

gr. Dave

 

[dave sutton]

what is the first cue a break cue? .900 is really big for a joint. what your asking is kinda hard. shafts and butt wont line up perfect and most makers wont have a bad example of their work floating around like that

 

[manwon]

Hey guys,

I need two simple butts made for shafts I have. I'm not looking to spend too much money,
so an "up and coming" cuemaker might be best.

I need a one-piece purpleheart butt straight taper .900"-1.25" with a 3/8x10 G10 Pin.
The second butt would be for a jump cue, a 15" maple butt .87" at the joint 5/16x14 pin, preferably brown stained.

Feel up to the job? Can you get it done within a month or so? Send me a PM.

gr. Dave

Here you go Dave, are these simple enough!!!!!!!



Enjoy Dave!!!!!!

Oh and by the way Dave, Phone Numbers can be supplied by PM, or for privacy purposes they can just be shipped, fee's are Negotiable!!!!!!!

 

[Double-Dave]

what is the first cue a break cue? .900 is really big for a joint. what your asking is kinda hard. shafts and butt wont line up perfect and most makers wont have a bad example of their work floating around like that

Hiya Dave,

You make a good point, I can send the shafts to match the butts.
Yes the first is a break cue, I have a very very nice Purpleheart shaft for that.
I also have one of the X-Breaker/Jumper with the bowlingball ferrule and xtreme tip,
I want a longer jump section for it that's pretty light.
Oh yeah, and get some sleep man!

gr. Dave

 

[Double-Dave]

Here you go Dave, are these simple enough!!!!!!!

Enjoy Dave!!!!!!

Oh and by the way Dave, Phone Numbers can be supplied by PM, or for privacy purposes they can just be shipped, fee's are Negotiable!!!!!!!

Phone numbers? I'd need a cell phone pretty bad if I went there.....
the rescue team might be able to tri-angulate my position that way.

Dave <- glad his stomach is still empty.

 

[WheatCues]

Hey guys,

I need two simple butts made for shafts I have. I'm not looking to spend too much money,
so an "up and coming" cuemaker might be best.
I can send the shafts to have the butts matched.

I need a one-piece purpleheart butt straight taper .900"-1.25" with a 3/8x10 G10 Pin.
The second butt would be for a jump cue, a 15" maple butt .87" at the joint 5/16x14 pin, preferably brown stained.

Feel up to the job? Can you get it done within a month or so? Send me a PM.

gr. Dave

I AM THE MAN FOR THE JOB !!!!!!!

Your request is no problem at all.... since everything I do is 100% custom, I could care less what others think of my many degrees of varied work, my primary concern is building what YOU want, and as long as YOU are completely satisfied, that's all I'm concerened about !!!

I have built my reputation on offering "tools" at a practical and realistic price as well as building them thicker, thinner, longer, shorter, etc.... again 100% completely to YOUR specifications !!!

If your interested, please give me a call for so we can discuss specifics...


Sincerely, Eddie Wheat - 321-631-1827