Two cues (2 brothers) in progress.
- Thread starter DBK
- Start date
I dig the top one.
. And as often happens, one a little higher than the other. 
Finished product looks great.
I apologize for the little offtopic.
This pair of cues was made to order. However, customers disappeared from the communication. I know that you (customers) are reading AZ forum because earlier contacted me on the link on this forum and we agreed that the pictures in the process I will post here, you said it works best for you. So I decided to publish the final report also here.
Both cues have wenge and hornbeam forearm full splice double-edged crown, rosewood handle, white - acrilic ivory substitute, black phenolic joint and cup. Window ring on three positions and on one 4 points on the sleeve. Let's named they by the color of windows, one - white, the other black.
In the order was determined -
1. Length: White - 2x750 mm (2x29.5"), black - 2x740mm (2x29) - done.
2. Weight and 19.5-19.6 & 19.0-19.2 oz - done
3. Balance point at both about 18.8-19 "- done.
4. Joint - radial pin, shaft hornbeam, 12.5 mm tip Wizard-M - done.
5. Engraving in each window. - Not done. Because, first - I did not wait sketches from you, and secondly - it was optional and I decided to keep more simple cues, not to raise the price of cues. Therefore, prices have remained on starting level 750 and 700 euros respectively.
Cues were ready on time, ie at the end of November, but my attempts to contact you have failed :frown:. It certainly upset me. But I decided to wait for some time before put them on sale. I am sure that cues will sold, and some bad mood will leave, because soon the holidays.:smile:
Merry Christmas to all.:wave:
This pair of cues was made to order. However, customers disappeared from the communication. I know that you (customers) are reading AZ forum because earlier contacted me on the link on this forum and we agreed that the pictures in the process I will post here, you said it works best for you. So I decided to publish the final report also here.
Both cues have wenge and hornbeam forearm full splice double-edged crown, rosewood handle, white - acrilic ivory substitute, black phenolic joint and cup. Window ring on three positions and on one 4 points on the sleeve. Let's named they by the color of windows, one - white, the other black.
In the order was determined -
1. Length: White - 2x750 mm (2x29.5"), black - 2x740mm (2x29) - done.
2. Weight and 19.5-19.6 & 19.0-19.2 oz - done
3. Balance point at both about 18.8-19 "- done.
4. Joint - radial pin, shaft hornbeam, 12.5 mm tip Wizard-M - done.
5. Engraving in each window. - Not done. Because, first - I did not wait sketches from you, and secondly - it was optional and I decided to keep more simple cues, not to raise the price of cues. Therefore, prices have remained on starting level 750 and 700 euros respectively.
Cues were ready on time, ie at the end of November, but my attempts to contact you have failed :frown:. It certainly upset me. But I decided to wait for some time before put them on sale. I am sure that cues will sold, and some bad mood will leave, because soon the holidays.:smile:
Merry Christmas to all.:wave:
Last edited:
Thanks :smile: