Weight bolt

Take a good soldering iron and heat up the bolt if you can reach it. once the bolt starts warming up, start trying to loosen it. As long as you don't smell wood burning you will be ok.
 
Travis3c said:
Take a good soldering iron and heat up the bolt if you can reach it. once the bolt starts warming up, start trying to loosen it. As long as you don't smell wood burning you will be ok.
Click to expand...



This is the same method I use, if you have ever changed the weight on a Heubler cue this method will save the day, It seems that Paul glued all his weight bolts in.

For the OP, it may take some time to do this but be patient it will work, just remember to keep the tip in the soldering irons tip in the center of the weight bolt and it will cause no problems with the wood or the other materials in the cues butt.
 
I've put an allen key into the bolt and used the plumbers torch to heat it, just like when you need to remove a pin. Patience is the key

Walter
 
You must log in or register to reply here.
Back
Top