whats in your case??

this is everything i carry around everytime and actually use

tip shaper, blue diamond & molinari chalk, another tip shaping gadget, kamui chalk and sandpaper different 'hardness' :smile:

1z4wyew.jpg
 
this is everything i carry around everytime and actually use

tip shaper, blue diamond & molinari chalk, another tip shaping gadget, kamui chalk and sandpaper different 'hardness' :smile:

1z4wyew.jpg

cool gloves, where can i get some??
 
Theyre made by renzline, and if im not mistaken theyre produced by longoni (europe), i buy them from a local billiard shop but they might be available at kozoom.com
 
My Case Simple: a JBCases Masonite, 2 x 4. Not sure John made more than one, as it is REINFORCE both Front & Back for more protection.

Cues are both by Chad Carter, a Brunswick 4 Point Titlist Conversion, and old Brunswick Two Butterfly Point Conversion.

Cue It Up Holder, and Two Towels, as I am a sweater.

Top Pocket Contents:

Black Pouch One-Folding Reading Glasses.

Black Pouch Two-Extra Hearing Aid Batteries.

Assorted Grit Sand Paper

Green Pouch-Small Piece of Master Pre Flag Green

Master Pre Flag Green & Leather Chalk holder

Couple of Small Flannel Rags

Mueller’s Tip Gage

Lower Pocket Contents


Small Blue Draw String Bad with Tip Tapper, Dime Willard, Porper Mushroom Removal Tool, and a couple of more Cubes of New Pre Flag Master Green

Spinnelli Moosehead Bridge, Pro-just-A-Bridge, and another Cotton Rag.
 

Attachments

  • attachment.jpg
    attachment.jpg
    88.6 KB · Views: 1,202
  • attachment-1.jpg
    attachment-1.jpg
    90.4 KB · Views: 1,151
  • attachment-2.jpg
    attachment-2.jpg
    91.6 KB · Views: 1,118
lol, its called electrical tape, commonly used to hold a cue together after missing an easy shot and banging your cue on the floor splintering the butt end, its a common method of cue Rx.

LMFAO, I couldn't have explained it any better myself :thumbup:
 
Depends on which case i use, i usually fill my case up and in this case i've been using this case for the past 2 months and have been too lazy to change:


IMG_7534_zps3665efdc.jpg


IMG_7554_zps120911ff.jpg


IMG_7550_zps40873c4c.jpg


IMG_7542_zps965de66a.jpg


IMG_7543_zpsd35222ec.jpg


IMG_7559_zps4b678b43.jpg


IMG_7557_zps26775a58.jpg


IMG_7545_zps8b481b09.jpg


IMG_7556_zps1fc87824.jpg


IMG_7549_zps36b0a335.jpg
 
Depends on which case i use, i usually fill my case up and in this case i've been using this case for the past 2 months and have been too lazy to change:


IMG_7534_zps3665efdc.jpg


IMG_7554_zps120911ff.jpg


IMG_7550_zps40873c4c.jpg


IMG_7542_zps965de66a.jpg


IMG_7543_zpsd35222ec.jpg


IMG_7559_zps4b678b43.jpg


IMG_7557_zps26775a58.jpg


IMG_7545_zps8b481b09.jpg


IMG_7556_zps1fc87824.jpg


IMG_7549_zps36b0a335.jpg

GOD Damn!!!!!!!!!!!!!!!!!!!!! and is that a scope??:
 
GOD Damn!!!!!!!!!!!!!!!!!!!!! and is that a scope??:

That's a tip tool from Bilking Korea, it's got 3 functions. It can Level the ferrule top flat for tip change, create "r" on tip before shaping and lastly to trim the sides of tips in line with ferrule.
 
Scandalous Jive, you have a Mobley and it ISN'T in your case :o

It was until the Barenbrugge came about...it's going back in really soon..Speaking of Mobley Jamie's Mobley Jump Break is sick and Cedric's Mobley player looks gorgeous too...all in this post!
 
Haha it looks like a big pouch cos from the front it looks one piece but internally it's 3 compartments.
Top lid is shallow, probably the height slightly taller than an iPhone.
Bottom is divided into two with side zippers, left for jump cue and right is largest compartment of the 3.
 
It was until the Barenbrugge came about...it's going back in really soon..Speaking of Mobley Jamie's Mobley Jump Break is sick and Cedric's Mobley player looks gorgeous too...all in this post!


Pretty certain that Cedric's player is a Searing :)

The Worminator breaker is brilliant!!
 
PFD Studios Tribute Cue for my son.
King Tribute case (with a special JB interior) for my late daughter.
Pool towel cut from my late Loki's Thunder Shirt.
BK3.
Air 2.
Misc cue products.
Coin holder.
 

Attachments

  • cuecase11.jpg
    cuecase11.jpg
    71.9 KB · Views: 871
Last edited:
Haha it looks like a big pouch cos from the front it looks one piece but internally it's 3 compartments.
Top lid is shallow, probably the height slightly taller than an iPhone.
Bottom is divided into two with side zippers, left for jump cue and right is largest compartment of the 3.


Mine is like that too. Yangs cases are amazing. The next one he's making for me will be amazing
 
Back
Top