I have a piece of 860 simonis that was folded and stored in a bag.
It is full of wrinkles,not creases.What is the best way to remove them?
Thanks for any suggestions.The cloth is for the bed on an 8 foot table.
Paul
I like to use a CLEAN piece of wooden dowel,cardboard tube or pvc pipe etc and roll the cloth onto it like it was originally on the bolt. You can put several pieces on the same dowel but sometimes the top piece is not the one I need so it takes a little time to unroll a few cuts and re-roll back on the ones your not using.This works great if your storing the cloth cuts for awhile before using them.
Anyway no wrinkles when you go to use the cloth it lays down perfectly flat!!!
Gordon Graham
425-275-8255
Las Vegas
If your going to install the cloth in the next few days the cloth will be stretched so tight the wrinkles will be gone anyway. I reread your post and my solution was more for cloth that you want to store for awhile wrinkle free. Good luck
I had the same issue with mine. I laid it out on a flat surface and ironed it a section at a time. I then rolled it onto a 1" PVC pipe. The wrinkles came out and it installed perfectly. It did not shrink at all.
I wouldn't do anything to it. Just install it and when its stretched the wrinkles will pull out. I would not risk any sort of steaming, ironing, or anything else.
I wouldn't do anything to it. Just install it and when its stretched the wrinkles will pull out. I would not risk any sort of steaming, ironing, or anything else.
I wouldn't do anything to it. Just install it and when its stretched the wrinkles will pull out. I would not risk any sort of steaming, ironing, or anything else.
