Hello guys, I bought a radial CF shaft and I am going to put a 5/16 14 insert ... can I use a west system epoxy ? its 105 and 207 to be exact.. thank you for the response....
You can use the 207 but I wouldn't touch it for a couple of days after you install the insert. Personally, I would use 205 or 206 with some 404 powder added.
Thanks for the info... I bought the 205... is the 205 and 105 ratio is 3 is 1 by weight?
But for today, 5-1.
When I mix epoxy resins, I weigh the Hardener first, then calculate the final weight, and add resin to that new number. A small variation of resin on the total, ie .1 gram extra resin or not enough resin, is not as bad as there being 0.1 gram too much or not enough hardener to the mix. Gun powder scales are really good for epoxies too, if you see them for sale or at yard sales. I find the electronic ones sometimes time out before you get everything done.
Thanks for the info... I bought the 205... is the 205 and 105 ratio is 3 is 1 by weight?