running english

E

evergruven

AzB Silver Member
Silver Member
until recently, I thought "running english" meant "top"
while reading, I somehow realized that this could not be
because top kills the cb going into the rail, right?

so are we talking just left or right? with a little top or no?
how do you define/explain "running english"?
 
evergruven said:
... how do you define/explain "running english"?
Click to expand...
It is sidespin that causes the cue ball to speed up when it hits the cushion at an angle (or at least not slow down as much as it would have without side spin).

If the cue ball goes straight into the cushion, I suppose you could call either side to be running english.

If you really want to learn more billiard vocabulary and terms (along with history and rules), get Mike Shamos' "New Illustrated Encyclopedia" which can be found for under $10 delivered to your door. It also has a lot of neat pictures.

CropperCapture[538].png
 
Bob Jewett said:
... If you really want to learn more billiard vocabulary and terms (along with history and rules), get Mike Shamos' "New Illustrated Encyclopedia" ...
Click to expand...

Another good source for terms, phrases, and lingo is the Glossary on Dr. Dave's site: https://billiards.colostate.edu/glossary/#R

For running english, he has:
  • sidespin that causes the CB to speed up after bouncing off a rail, also resulting in a wider (longer) rebound angle. The spin is in the direction that results in “rolling” along the rail during contact.
 
Bob Jewett said:
It is sidespin that causes the cue ball to speed up when it hits the cushion at an angle (or at least not slow down as much as it would have without side spin).

If the cue ball goes straight into the cushion, I suppose you could call either side to be running english.

If you really want to learn more billiard vocabulary and terms (along with history and rules), get Mike Shamos' "New Illustrated Encyclopedia" which can be found for under $10 delivered to your door. It also has a lot of neat pictures.

View attachment 550242
Click to expand...

thanks bob
I like this part >>> "(or at least not slow down as much as it would have without side spin)."
coincidentally, I was digging around recently, and came across a post of yours referencing mike's writing re: "english" (no running)
will have to investigate his stuff

AtLarge said:
Another good source for terms, phrases, and lingo is the Glossary on Dr. Dave's site: https://billiards.colostate.edu/glossary/#R

For running english, he has:
  • sidespin that causes the CB to speed up after bouncing off a rail, also resulting in a wider (longer) rebound angle. The spin is in the direction that results in “rolling” along the rail during contact.
Click to expand...

thanks AL
dr. dave's place has certainly been a well for me (and others, I'm sure)

and while perhaps simple enough to define
I'm curious if anybody has additional ideas about it
please chime in, if so
 
Simply inside English . Cutting right it would be right English . High ,middle or low depending on cut angle. Atleast that’s what I’ve always called running English
 
peteypooldude said:
Simply inside English
Click to expand...
Inside English on the OB can be either “running” or “braking” English on the rail, depending on the carom angle into the rail.

The same terms can also describe the CB’s interaction with the OB: inside = “braking” and outside = “running “.

pj
chgo
 
Patrick Johnson said:
Inside English on the OB can be either “running” or “braking” English on the rail, depending on the carom angle into the rail. ...
Click to expand...
As an example of this, imagine shooting a ball on the foot spot into the side pocket and the cue ball is near the second diamond so it is travelling parallel to the short rail on its way to the object ball that is on the foot spot. If you use inside side spin with follow, the cue ball will hit the long rail first and the side spin will be "reverse" or "breaking" on the long rail.

But if you play the shot with a little draw, the cue ball will hit the foot rail first and the side spin will be "running".
 
evergruven said:
until recently, I thought "running english" meant "top"
while reading, I somehow realized that this could not be
because top kills the cb going into the rail, right?

so are we talking just left or right? with a little top or no?
how do you define/explain "running english"?
Click to expand...
FYI, all sidespin/english terminology is described and demonstrated in the videos and illustrations here:

Sidespin and English Terminology and Uses

Enjoy,
Dave
 
Bob Jewett said:
...But if you play the shot with a little draw, the cue ball will hit the foot rail first and the side spin will be "running".
Click to expand...

Just the opposite if the ‘draw’ is center ball. The cut object ball will induce outside spin (which would then be ‘braking’ english when it hits the end rail), and the still reversing draw spin will kill the rebound angle even more. Even with polished balls & new cloth the ‘braking’ effect is significant.
 
Last edited:
evergruven said:
until recently, I thought "running english" meant "top"
while reading, I somehow realized that this could not be
because top kills the cb going into the rail, right?

so are we talking just left or right? with a little top or no?
how do you define/explain "running english"?
Click to expand...

This maybe a little odd of an explanation, but think about it this way:

you are walking briskly toward a brick wall at an angle with your right hand side closest. When you make contact with that wall, the friction from the bricks will grab your shirt will tend to make you spin clockwise. That force is running English. If you approach the wall from the opposite side, you will spin counter clockwise.

Strange analogy, I know, but I hope it helps to illustrate what is going on.
 
If we remove the object ball from this discussion and just use the term to carom off multiple rails: "running english" would be the same spin on the cueball upon striking it as it would have after hitting 2 or more rails. Typically this is a level cue stroke just above center ball with spin in the direction the cueball is travelling around the table (about 1 o'clock to 2 o'clock if you are traveling in a clockwise direction, 11 oclock to 10 o'clock travelling counter clockwise. You need to test each table for the correct amout of spin needed.

An easy test to see what I'm talking about is to put the cueball anywhere in the middle of the table or near a corner pocket and hit it to the opposite rail around the 2nd diamond with a center ball. You will see that the cueball slides/skids and doesn't follow the typical "running english" path until after the 2nd rail. You will see that the ball spins naurally (running english) once it hits the 3rd rail. This natural spin is what you want to achieve as you hit the cueball to judge the path and speed throughout the kick to properly use basic systems.

Now that you tested it using center ball, hit the same place on the rail using "running english" as described above and you should see a very consistant roll and speed as it travels the rails.

When you add an object ball into the equation it would typically mean the same thing, but you may need hit it higher, flatter or draw off the object ball depending on the path your cueball needs to travel, but the correct spin should be used to be considerred running english (spinning in the direction the cueball is travelling).

Hope this helps. There are many sources that discuss this as Dr. Dave and Mr. Jewett (my heroes) decribed.

Good luck,
Dave
 
Last edited:
Patrick Johnson said:
Inside English on the OB can be either “running” or “braking” English on the rail, depending on the carom angle into the rail.

The same terms can also describe the CB’s interaction with the OB: inside = “braking” and outside = “running “.

pj
chgo
Click to expand...

That’s why I said in my original post... that’s what I’ve always considered running English . Just an honest answer. I’m not much on reading everyone’s comment to form my answer lol. I never looked up the Instructors definition. That’s just what it is to me. Knowing the correct textbook definition however will change the way I answer next time I’m asked.
Appreciate the input
 
Last edited:
Bob Jewett said:
As an example of this, imagine shooting a ball on the foot spot into the side pocket and the cue ball is near the second diamond so it is travelling parallel to the short rail on its way to the object ball that is on the foot spot. If you use inside side spin with follow, the cue ball will hit the long rail first and the side spin will be "reverse" or "breaking" on the long rail.

But if you play the shot with a little draw, the cue ball will hit the foot rail first and the side spin will be "running".
Click to expand...

That’s a better description of what I was referring to. I’ve never heard outside English referred to as running English . But I’ve also never asked.
 
peteypooldude said:
.. I’ve never heard outside English referred to as running English ...
Click to expand...
If you play the same shot off the spot with outside english and follow, the side spin will be running english when the cue ball hits the long rail. If you play with outside and draw, the side spin will be reverse english when the cue ball hits the short rail.
 
You must log in or register to reply here.
Back
Top