Lotta 14.1 ers used short bridges. It used to be recommended even.Then I have a short bridge. My hand stays closer to the end of shaft.
Nope. it's kind of funny. I've told this story many times, because I didn't believe it was possible. Growing up I was always a feel player, you feel where you need to aim and with experience, you make the shot or you don't.i’ll preface by saying you’re a good player and i am not, so these questions are genuine and not some kind of attack.
do you NOT adjust aim or stroke anyway?
i use LD, parallel english and i know i bridge further up than the pivot point on my shaft.
every single shot, before i even get down, i think i am adjusting my aim or stroke depending on what kind of ball i intend to hit.
deflection isnt much of a concern for the most part and really only seems to come up on long slow spin shots. i grew up on maple so these shots just kind of take me back and i seem to aim accordingly.
is there some kind of magical combination of mechanics and cues that allows you to just straight up not correct for squirt and swerve?
Nope. it's kind of funny. I've told this story many times, because I didn't believe it was possible. Growing up I was always a feel player, you feel where you need to aim and with experience, you make the shot or you don't.
This is sometime in 1999. I was at a place in Riverside Ca called shooters. At the time the GM there was like Efren's best friend, a guy by the name of Alex. He ended up opening his own room in Rancho Cucamonga called Stixx. So Efren came in often, whenever he was in the states. So I'm practicing and in walks Efren and starts practicing on the table next to me.
He was shooting this shot that was insane to me at the time. The 8 and the cb are one end of the table dead straight about a 1/16" off the rail. The nine is on the rail on the other end of the table. He proceeds to shoot the 8 with top right and shoots it dead into the pocket on a table with 4.25" pockets, and sends the cueball down table with perfect shaped on the 9. He does this like ten times in a row.
So I ask, how in the hell are you putting that much $h1t on the ball and still being accurate?
Alex translates, well answers for him really, saying, just aim normal, like center ball and rotate over for the amount of english you want.
I thought about this and said to myself, not to Efren lol, there's no way, he's gotta be compensating subconsciously.
Now fast forward three years. I'm in the Navy, I'm playing all the time (because I was intelligence and when we were in port we didn't really do anything) and a really good player out of San Diego was talking while I was practicing, and I over hear him. His name was Chip Klein. He starts talking to someone and I see him describing what Efren described.
Long story short, even though it was EFREN REYES saying it, I didn't listen, or even try to use BHE for 3 years.
I've used it ever since...and learned a lot more about it like the fact that you need to bridge at the cue's pivot point. But remember, everyone taught back then that you should bridge at 8-10 inches and that is the natural pivot point for standard hard rock maple, so for most people even without knowing about the pivot point, BHE would work.
Now, it works for the vast majority of shots, obviously if you hit too soft, then swerve is a bigger factor, etc, etc. But there's no reason to guess or compensate manually for side spin.
You need to try and minimize swerve, so you should elevate and lower your bridge for follow and draw, but for the majority of shots, it works without any other compensation.
Remember that whenever you're hitting off center, there's spin on the ball, that spin will typically cancel out any CIT.thanks for the story!
where does throw fit into this equation?
That's because shafts have gotten so much lower in the CB deflection department. The reason that the old school teachings had the bridge 8-10 inches was because that's where the standard wood shafts had their natural pivot point. Bridging at the pivot point gives a higher margin for stroke error/deficiency.
Deflection has gotten so low that the pivot points are much farther back. I've seen them as far as 19". So players naturally now end up bridging farther back and if you play with a low deflection shaft, it would behoove you to find your cue's pivot point and bridge there. This is also independent of using bhe.
People may think that parallel english works on sld(super low deflection) shafts but it doesn't. The only way that works is on tables with big pockets. On my table I'd miss every shot without adjusting aim or stroke somehow (3.9" corners). BHE and fhe are the best methods, but holding the bridge near or at the pivot point is beyond adjusting for side spin. It allows for stroke errors like swiping. Your cue ball won't go anywhere near where you were expecting but you'll still make the shot.
When I said a little bit longer bridge I'm not referring to Long. Just longer than like a four or six inch bridge. You play with a bridge that short to make an adjustment you almost have to un-plant your bridge hand. I'm just saying you don't want to be extreme in either way.If you need a longer bridge to perform micro adjustments said adjustments are far from micro.
LD shafts or not, using an 18" bridge as default won't do squat for accuracy.
When I said a little bit longer bridge I'm not referring to Long. Just longer than like a four or six inch bridge. You play with a bridge that short to make an adjustment you almost have to un-plant your bridge hand. I'm just saying you don't want to be extreme in either way.
Pat's the first one that came to mind to me, too. He would settle down on the shot and then shoot. He didn't really take practice strokes.Pat Fleming was the fastest Guy I Ever Played ! Ran a 50 on me in what seemed to be 5 Minutes
This was the first time I met him! Point and Shoot,amazing to watch IMHO
Well, I'm limited on knowledge on many things, but I know as much as I need to know about BHE and pivot points. You have a number of posts on this thread where you've made statements that, how should I put this, are, if not wrong, are unquestionably, incomplete.Now, it works for the vast majority of shots, obviously if you hit too soft, then swerve is a bigger factor, etc, etc. But there's no reason to guess or compensate manually for side spin.
You need to try and minimize swerve, so you should elevate and lower your bridge for follow and draw, but for the majority of shots, it works without any other compensation.
Not often at all, Hope You are well !Pat's the first one that came to mind to me, too. He would settle down on the shot and then shoot. He didn't really take practice strokes.N
He also didn't miss very often.
Why do you gotta be a dick about it? I promise you I'm right, you can either learn from it or don't no skin off my junk.Well, I'm limited on knowledge on many things, but I know as much as I need to know about BHE and pivot points. You have a number of posts on this thread where you've made statements that, how should I put this, are, if not wrong, are unquestionably, incomplete.
I chose to reply to this one because it's probably the most blatant misrepresentation.
To my limited knowledge, with most LD shafts the PP is upwards of 15". Some by quite a lot. Go ahead and make the video but be sure to include let's say, 4 or 5 different types of shots and shoot them all with different speeds and distances using the same length bridge. No cherry picking.
People, including myself, have always been incredulus about BHE and the pivot point. I don't know probably 12-14 years ago now when I was streaming some tournaments, I got on and did a live stream and had a caller call in and AFTER I got down on the shot and locke my bridge in lined up on a straight shot, I had the caller choose what english to put on the ball. I then just pivoted for the type of english HE chose to show him it works.
I'm not willing to do that again, you guys are gonna have to just try it for yourself. It works, for the vast majority of shots. The only ones you really have to adjust for are the super soft shots and sometimes the super hard ones, but you could see that even a long semi hard shot I took on the seven with low outside worked just fine.
On shitty strokes, I noticed Dr Dave uses an articulated full stance pivot to preserve the integrity of his stroke.Why do you gotta be a dick about it? I promise you I'm right, you can either learn from it or don't no skin off my junk.
So many people have left this site because of people who like to thumb their noses to those who have and are willing to share the knowledge.
It should also clue you in as to why you'd make shots but have no idea why the cueball didn't do what you expected.On shitty strokes, I noticed Dr Dave uses an articulated full stance pivot to preserve the integrity of his stroke.
I don't. (lol) I just move the back hand. There's plenty of ligaments to compensate for you; keep it linear. Anyway, that clued me as to why I was able to bang so well in the beginner stages. Thanks.
Zackly.It should also clue you in as to why you'd make shots but have no idea why the cueball didn't do what you expected.
If you watch me play for any extended period, you'd be able to see that I've trained my arm to swing in and out for the back hand movement, that way I'm still using a pendulum swing for the actual stroke, and I use a modified snooker stance to keep my body out of the way of my arm swing.