Search results

Those are also prone to warpage in the field. And prone to chatter in the taper machine. Imo all shafts should have at least a mm of rise to the middle .

" Pro-taper" was butchered years after it named . The original "pro-taper" is a gradual rise in the stroking section. NOT NO-TAPER or straight. Make your life easier . Just measure the middle of the your shaft ( the one you really like ) and check the diam compared to the tip. If it's 1mm larger...

13mm

Best thing to do with black palm and Wenge is to apply epoxy coat before the final taper pass. That way the pits are sealed before you even sand it. Saw Wenge handled cue here a few years ago. Made by a big named maker..It had dust in the pits all over. It was ugly.

The most powerful drill of all time

I'm finishing these for my Taiwan dealer. Tight grain as can be . 3.7+ oz. I've had 4 oz but they're rare. Basically you have to start with an 11 oz 1" dowel. I just weighed 10 newly turned peanut butter KW. 8 were below 10 oz. 2 were 10.2 or so oz . Not impossible to find but rare. I have...

.222 is correct for 32.25. You basically have run of the mill .0138" taper per inch. Kinda thin in the middle, that's why old school had 1.260+ bottom or compound taper.

Sorry, you're not going to be able to tell weight was added to a 4 oz shaft to get to 4+oz. Specially if it's jointed to the butt. Maybe, you can by holding the shaft but no way you can when shooting. If it's a high quality piece, you shouldn't worry .2 to .3 oz was added. I suggest paper...

that sucker is heavy as fkk. I sold mine . He did make a nice saw arbor . Still use it today .

I like this. Don't like measuring

Dipped UV finish production cues . Forget it . The finish is like 1MM thick.

Yes. Why have 3/8 14 when you can have 16? One genius at a pool hall here insisted his Falcon hit awesome because it had 5/16 18 instead of 14.

Yes.

k

If you have hydex rods, you can make the ferrule after you've removed the old one.

2 sets available

2 feet joint ( 15/16 with .562 hole ) 1 foot Cap ( 1.325 with .687 hole ) $57 shipped. Venmo, zelle or cashapp.

There are more species more stable than maple as underwrap.

Mariposa Cues

Get a taper bar and 30" rod to indicate. Make life simpler.