Search results

Last Updated March 4, 2026 THIS THREAD IS A POOL TABLE MECHANICS AND INSTALLERS DIRECTORY that includes some of the top people in the business throughout the USA. THIS IS "NOT" A THREAD TO POST QUESTIONS ABOUT TABLES/SERVICES. FOR QUESTIONS ABOUT TABLES/SERVICES PLEASE START A SEPARATE...

Try Jay Spielberg - 603-765-6160 He gets around new england and has skills right up there with RKC

Can't say RKC250 is currently sold as Slocum Contact Adhesive at my supplier.

Some wood blocks and tapcons would keep your table from moving.

Guessing USB 3.0 or 3.1

HDMI

What exactly is a "paper reinforcements"? 🤔

The Premiums are the same however the numbers are slightly different and bolder.

Those are Aramith Premieres. Been sold for a long time so there's nothing special about them. . Good quality, better then Crowns, a step below Premiums and 2 steps below Super Pros.

4435648922?

A facing is a slice of rubber applied to both ends of each rail cushion. There are different types of facings however they are all a rubber material and generally black in color. And just an fyi, the correct terminology is cushions - not bumpers. 🙃

Were the rails recovered when setup in your home? Some of those pockets seem to look like there's no facing on the rails.

The profile is A48 or #48. Measure the back side of the cushion which should be 1 1/16" I think you can get a set of cushions at Classic Billiards or Muellers

This may help you - cushion measurements you can also measure the subrail where the cushion was attached.

What a great idea :cool:

The bottom side don't look like 860 either. You should send these pics to Seyberts for resolution.

I personally would not try to recut the featherstrip slots. When you get the new strips test fit them with a piece of cloth. Should be snug. As for glue for the cushions you can get a quart of 3M-10 Scotchgrip which works good and is readily available.

Some are rectangular and some have a rounded edge side. You can use either.

No Basswood featherstrips are typically 1/4" x 5/16" . Easy enough to get a set of 6 at many sources online.

You will probably have to get a complete cloth package (bed and rails). Wherever you get your cloth from make sure to SPECIFY that the rails should be cut for a carom table. You should get 3 rail pieces, 2 for the long sides and 1 you cut in half for the ends.