Another cue ID

[Dgerst]

5/16 X 18 flat faced joint. Fit and finish lead me to believe it's not Asian but who knows?
https://drive.google.com/file/d/0B1Z9gsiU9GccM2t3M2JDN01FMXM/edit?usp=sharing
https://drive.google.com/file/d/0B1Z9gsiU9GccNGVsbkpMbWNJOVE/edit?usp=sharing
https://drive.google.com/file/d/0B1Z9gsiU9GccTWc0dFpiNFo0OUE/edit?usp=sharing
https://drive.google.com/file/d/0B1Z9gsiU9GccaTlqVGtUMXQwWDQ/edit?usp=sharing
https://drive.google.com/file/d/0B1Z9gsiU9GccbjIzMFdoUXdUc0k/edit?usp=sharing
Thanks!

 

[cueball1950]

why no fore arm pictures or pictures of the whole cue........mike

 

[cuesblues]

Hard to tell from the pics, but I could speculate and say the cue is an import, worth $10-$20

 

[Dgerst]

It a plain wrapless maple forearm. Here's more of it.
https://drive.google.com/file/d/0B1Z9gsiU9GccQzdRLVN5OW5Sc00/edit?usp=sharing

 

[cueball1950]

picture of whole cue please.........mike

 

[Dgerst]

Finally got around to taking a photo of the whole cue. There also this little extension with a rubber tip the screws on to the butt of the cue in place of the shaft. I've been around cues since the 70's and have never seen one of these. Any ideas?

 

[hang-the-9]

The shaft looks to be made from cheap wood stock, you can see the thick wavy grain on it. Does not look like it was cut the same way a good shaft would be.

 

[jayman]

It is an Adam CM-1

 

[Dgerst]

Thanks. Anyone have an idea of what the funky 6" rubber tipped "shaft" is for?

 

[cue fix]

Thanks. Anyone have an idea of what the funky 6" rubber tipped "shaft" is for?

It's probably a home made extension. Take the bumper off and see if it fits.

 

[Dgerst]

It's not an extension. Bumper screws into the end with a wood screw.

 

[measureman]

Thanks. Anyone have an idea of what the funky 6" rubber tipped "shaft" is for?

Early jump cue butt?

 

[shamadam]

It's not an extension. Bumper screws into the end with a wood screw.

First attempt at a joint protector?:thumbup::grin: