Best All-Around Production Cue for ~$1000 (Value, Playability, Durability, Support)?

[skor]

Joss cues are so generic looking. Most of them, in my opinion. The wood they use in their forearms looks like very low grade Curly Maple, and their Points remind me of a DP cue, lol. Overall, they just look very generic, and ugly. I am sure they hit good though.

Pechauer cues, I do not like that they use the term Ebonized Maple a lot, in their cues. Just sounds so cheap. I hate the thought of stained cues, to make them look like Ebony. Just seems cheap to me. Their designs also look not that great to me.

And, JFlowers, and others, like Cuetec for example, they just seem very cheap to me. Probably made with Overlays.

For under a $1,000, I would just get a Mezz. Best production cue on the planet.

design is a matter of personal taste. All production cue makers today make pretty ugly cues in my opinion, I'm more of a classic design guy myself but that's up to the buyer to pick their cue.

JFlowers have many cues with overlays but some are real inlays, mine is such a cue.
It is well made, feels great and the SMO shaft is very good in my opinion. The leather wrap is "genuine" which means that is the lowest quality of leather but still better than all those sports wraps and some of the linens used today.

And again, if you want a CF shaft and an extension to go with that cue then a Mezz will be over $1000

 

[skor]

Okay, lets just talk value alone. You buy a Mezz, and use it for a year, and want to sell for an upgrade, or for whatever reason. You are going to lose very little money on the cue. You buy an Ignite shaft for $575, and take good care of it. You will never lose more then $100 on your investment. That is guaranteed.

You buy any other Production cue on the market (Schon included), and you will probably lose 50% of what you paid, if you paid retail.

The Wavy joint is the most solid joint that I have ever experienced. It really makes me feel like I am playing with a 1 piece cue. The Mezz is just so freaking solid, in my opinion. No other production cues come even close to comparing.

this is depending on where you live. over here for example, It'll be easier for me to flip a $300 cue than a $1000 cue.

The Solid feel that you feel has very little to with the joint screw.
Being a propriety joint, it's hard to mix butts and shafts with other brands to prove it to you... btw, propriety joints are the worst and why I would ever own a cue with such a joint. I want to be able to just buy off the shelf shafts and fit my cues.
In the past, Mezz used to offer Predator 314 shafts as upgrade...

 

[vintagecollectibles831]

design is a matter of personal taste. All production cue makers today make pretty ugly cues in my opinion, I'm more of a classic design guy myself but that's up to the buyer to pick their cue.

JFlowers have many cues with overlays but some are real inlays, mine is such a cue.
It is well made, feels great and the SMO shaft is very good in my opinion. The leather wrap is "genuine" which means that is the lowest quality of leather but still better than all those sports wraps and some of the linens used today.

And again, if you want a CF shaft and an extension to go with that cue then a Mezz will be over $1000

I think this Rosewood Mezz looks nice, and made with all real wood, and real inlays.

ASTR-231 Billiard Cue

BEYOND THE HORIZONThe ultimate cue for advancing your skills to a new frontier. Built to launch your game into a new dimension, the ASTR features tapered core butt technology and a sleek design with alternating silver and black and white rings. Paired with the straight pro taper Sigma shaft...

mezzusa.com

J&J has it instock (they say), for $965. It is really all you need, if you want a great, and super solid hitting cue. And, they are made in Japan (not China), for whatever that might be worth to the buyer.

And, there is no staining in that cue. I hate it when they stain cues. Seems that Mezz might not do that. Like trying to make Maple look like Ebony, for example, which I see in Pechauer cues, for example.

 

[skor]

I think this Rosewood Mezz looks nice, and made with all real wood, and real inlays.

ASTR-231 Billiard Cue

BEYOND THE HORIZONThe ultimate cue for advancing your skills to a new frontier. Built to launch your game into a new dimension, the ASTR features tapered core butt technology and a sleek design with alternating silver and black and white rings. Paired with the straight pro taper Sigma shaft...

mezzusa.com

J&J has it instock (they say), for $965. It is really all you need, if you want a great, and super solid hitting cue. And, they are made in Japan (not China), for whatever that might be worth to the buyer.

And, there is no staining in that cue. I hate it when they stain cues. Seems that Mezz might not do that. Like trying to make Maple look like Ebony, for example, which I see in Pechauer cues, for example.

A. it does not have the wavy joint
B. I'm not a fan of how it looks
C. Juma is not wood...
D. $970 with regular shaft, that is not all I need for instance, I don't see a CF shaft upgrade option for that cue on the Mezz site thst you linked so that's an Extra $600 and I get a wooden shaft that I don't need. Add extension kit for about $200 and it's a $1800 cue. Really not the best option for a cue under $1000

 

[lakeman77]

I keep hearing that Cuetec products are very cheaply made though.

Not the ones I have had. can't dent 'em. can't break 'em. well finished. If a Cuetec falls on to a chair the chair gets hurt Millions $$$$ made with Cuetec cues. Probably the most money making cue out there. That should be all you need to know.

 

[vintagecollectibles831]

Here is a very nice Mcdermott (G520), with the latest 3rd Gen Carbon Fiber Defy shaft, for under $1k.

Robot or human?

Love the Bocote wood in that cue, and I heard that the 3rd Gen Defy is super smooth.

Mcdermott has excellent customer support.

 

[vintagecollectibles831]

Not the ones I have had. can't dent 'em. can't break 'em. well finished. If a Cuetec falls on to a chair the chair gets hurt Millions $$$$ made with Cuetec cues. Probably the most money making cue out there. That should be all you need to know.

Their Resale value is probably not that good though. Mezz cues have an excellent resale value. I still believe that Mezz is far higher quality.

 

[Cornerman]

Setting aside fancy custom builds and expensive limited production cues, what’s the best production cue overall if you want the whole package: great value, solid playability, consistent quality, long-term durability, a design that doesn’t look too crazy, easy maintenance, good manufacturer support, and it has factory-made accessories like extensions?

Looking to spend around $1000, shaft included. Would love to hear from people who’ve owned or played with cues in this range for a while, not just what hits nice out of the box, but what holds up over years of use. You can use below template if you would like, or just shoot your comment.

Cue Brand / Model:
Butt: (Material, weight etc.)
Wrap: (Irish linen, leather, no wrap, rubber grip, etc.)
Shaft: (Standard maple, low-deflection, carbon fiber, model name if known)
Tip: (Brand, hardness, diameter)
Extension: (Factory extension available? Yes/No, length)
Joint: (Type, pin size, material)
Weight Adjustability: (Yes/No)
Approx. Price:

Comments on Playability & Durability:
Post pictures of your cue if possible:
View attachment 844050

I don’t know what you mean by “production cue.” What are the characteristics you are looking for that would qualify it as a production cue? Do you mean “high volume, catalog cues?”

 

[vintagecollectibles831]

A. it does not have the wavy joint
B. I'm not a fan of how it looks
C. Juma is not wood...
D. $970 with regular shaft, that is not all I need for instance, I don't see a CF shaft upgrade option for that cue on the Mezz site thst you linked so that's an Extra $600 and I get a wooden shaft that I don't need. Add extension kit for about $200 and it's a $1800 cue. Really not the best option for a cue under $1000

The Mezz United Joint is also a super solid joint, with an ultra tight fit. If you ever screwed one together, then you understand what I mean. I actually like the way that the Mezz with the United Joint hits even more.

Again, the cue alone, for $965, is really all a player needs.

Did the OP say that a CF shaft is a requirement for under $1k? Is so, then I must have missed that.

 

[vintagecollectibles831]

Okay, if a Carbon Fiber shaft is required, with a cue, for under $1k, then here is a thought, for the best cue, with the very best value, for under $1k.

Joss sneaky pete, with a Mezz Ignite (United Joint) shaft. They will fit together with each other just fine.

Joss JOSSP01 Sneaky Pete Cue For Sale – Game Room Gorilla

Joss JOSSP01 Pool Cue – Katolox & Morado Points, 5/16×14 Piloted Joint If you appreciate true American cue-making, the Joss JOSSP01 is about as

gameroomgorilla.com

Mezz Ignite 12.2mm Carbon Fiber Pool Cue Shaft

The 12.2mm Miki (Mezz) Ignite shaft features the finest Japanese aerospace grade carbon fiber material combined with Miki's renowned precision and technical excellence. You can't find a better pool cue shaft!

www.pooldawg.com

 

[14oneman]

Setting aside fancy custom builds and expensive limited production cues, what’s the best production cue overall if you want the whole package: great value, solid playability, consistent quality, long-term durability, a design that doesn’t look too crazy, easy maintenance, good manufacturer support, and it has factory-made accessories like extensions?

Looking to spend around $1000, shaft included. Would love to hear from people who’ve owned or played with cues in this range for a while, not just what hits nice out of the box, but what holds up over years of use. You can use below template if you would like, or just shoot your comment.

Cue Brand / Model:
Butt: (Material, weight etc.)
Wrap: (Irish linen, leather, no wrap, rubber grip, etc.)
Shaft: (Standard maple, low-deflection, carbon fiber, model name if known)
Tip: (Brand, hardness, diameter)
Extension: (Factory extension available? Yes/No, length)
Joint: (Type, pin size, material)
Weight Adjustability: (Yes/No)
Approx. Price:

Comments on Playability & Durability:
Post pictures of your cue if possible:
View attachment 844050

I prefer a total custom, but for a production cue, I think Pechauer makes the best bang for the buck...