can someone tell me the pin size??

[brokedue2cues]

I don't know what pin size this is so i can buy a shaft for my cue. Need help!

 

[cueman]

Looks like 5/16-14 to me.

 

[brokedue2cues]

Cool thank you.

 

[ideologist]

I don't know what pin size this is so i can buy a shaft for my cue. Need help!

What kind of cue? Kind of looks like a 5/16-18

 

[brokedue2cues]

Russ Espiritu

 

[brokedue2cues]

Its hard to tell from the two sizes they look similar.

 

[billiardbum]

Typically he uses 5/16-14. The pin is out about an inch I am guessing? If so count the number of threads (Largest Peak) and if that is close to 14 that is what it is. From the picture I do not believe you can have 18 threads on that pin IMO

 

[dvs]

You can take a guess. Count the threads per inch. Or take it to Home Depot or a hardware store and see what size nut fits, just do so carefully

Good luck

But, my guess would be 5/16 X 14

 

[cueman]

You can take a guess. Count the threads per inch. Or take it to Home Depot or a hardware store and see what size nut fits, just do so carefully

Good luck

But, my guess would be 5/16 X 14

I would be shocked if he finds anything in Home Depot that is 5/16-14.

 

[Jim Baxter]

Its 5/16 x 14 , for sure . Jim

 

[brokedue2cues]

Thank you all. This really helped. The treads are hard to count because it goes further in than what you see in the pic. Its between 12-14

 

[gutshot]

Measure the number of threads in 1/2" and multiply by 2.