csmio card for cnc

[pescadoman]

175.00 shipped. New and unused.
http://www.cs-lab.eu/en/produkt-18,...otion_Controller_stepdir_with_connectors.html

 

[LGSM3]

U get an IP-s or just going a different direction all together?

That's a steal...I'll take it

 

[pescadoman]

U get an IP-s or just going a different direction all together?

That's a steal...I'll take it

I went smoothstepper....

 

[JoeyInCali]

I went smoothstepper....

With your XZero ?
I'm coming over. Let's make some parts.

 

[RBC]

I think you'll like the smoothstepper.

Make sure you use their new configuration tool. It makes things easier to setup.

Let me know if you need any help getting things running. I have a program that deals with the enable signals out to the motors and the servo on signals coming back from the motors.


Royce

 

[pescadoman]

I think you'll like the smoothstepper.

Make sure you use their new configuration tool. It makes things easier to setup.

Let me know if you need any help getting things running. I have a program that deals with the enable signals out to the motors and the servo on signals coming back from the motors.


Royce

Thanks Royce!!

Erm...Jake...can you pay me so I can conclude this and ship it out?

 

[LGSM3]

Lol, sorry almost never check pms....money should b there

 

[pescadoman]

Lol, sorry almost never check pms....money should b there

It's fine. A phone number and address would be great:thumbup:

 

[GBCues]

I think you'll like the smoothstepper.

Make sure you use their new configuration tool. It makes things easier to setup.

Let me know if you need any help getting things running. I have a program that deals with the enable signals out to the motors and the servo on signals coming back from the motors.


Royce

Hey Royce,
THANKS - I didn't know about it - I found it on the Warp9td site.
:thumbup:
Gary