Cuedaddy Cue Rests - Solid Wood Customs

cuedaddy

Banned
We are working on intoducing this to the billiard community.
Practically Custom made Pool Cue rests (2,3,4,&5 cue models) available in solid oak,pine,mahogany,& maple & with a choice of 10 different finishes

A piece of straight steel is added to every CueDaddy for weight, and to eliminate warping. And to keep them on the table we add a piece of rubber to the bottom.


oakclaw2.jpg

oakclaw1.jpg


I offer unconditional customer satisfaction and a super price ONLY to the AZbilliards community

woodsamples.jpg

1.Dark Walnut

2.Antique Oak

3.Red Oak

4.Cabernet

5.English Chestnut


6.Red Mahogany

7.Provincial

8.Golden Oak

9.Pickled Oak

10.Natural(No Stain)

Pine
2 Cue any color - 11.99 Including Shipping
3 Cue any color - 12.99 Including Shipping
4 Cue any color - 14.99 Including Shipping
5 Cue any color - 15.99 Including Shipping

Oak
2 Cue any color - 13.99 Including Shipping
3 Cue any color - 14.99 Including Shipping
4 Cue any color - 17.99 Including Shipping
5 Cue any color - 18.99 Including Shipping

Maple
2 Cue any color - 14.99 Including Shipping
3 Cue any color - 15.99 Including Shipping
4 Cue any color - 18.99 Including Shipping
5 Cue any color - 19.99 Including Shipping

Mahogany
2 Cue any color - 14.99 Including Shipping
3 Cue any color - 15.99 Including Shipping
4 Cue any color - 18.99 Including Shipping
5 Cue any color - 19.99 Including Shipping


Please Contact me through PM or email me at sales@cuebux.com
Or if you are local, you can find the cuedaddy at london road billiards in eau claire or on the net at www.cuebux.com

UNCONDITIONAL RETURN POLICY
 
Those are very nice but personally I prefer the Q-claw. It's soft and doesn't harm the cues.

I'm not trying to knock your sale. I'm just suggesting some type of padding.
 

Attachments

  • cue claw.jpg
    cue claw.jpg
    50.8 KB · Views: 448
Hal said:
Those are very nice but personally I prefer the Q-claw. It's soft and doesn't harm the cues.

I'm not trying to knock your sale. I'm just suggesting some type of padding.

It is funny because the guy is posting again after he said he would try all the suggestions on cushioning and all, now he ends posting the same stuff again. I guess some people do like to shoot themselves on the foot.
 
Great Cue Rests

I just received the 2 cue rests I bought from cuebux. They are awesome. I like things that are hand crafted and these have excellent workmanship. I see no reason that a cue would be damaged using these. The curves are smooth and stained. If you get drunk and slam your cue around then go for the molded plastic. But if you are relatively careful when handling your cue and want a cue rest that is hand made these are great.

Wedge
 
Last edited:
I just wanted to thank wedge for a very smooth transaction, and I realy appreciate the follow up, You know those are lookers.. who knows, these might be something to collect

Hal, you know what.. I like your idea, thats why i took it and improved it. We will be having backing as per your suggestion along with many more peoples suggestion to have a cushion, though I dont see anyone damaging there cue on the rest with normal use as is either

We are working out adding suede and leather while keeping the rest easy enough to make for us and while keeping it out of the tacky region.

cdad.jpg

I was thinking taking the table saw and cutting through the teeth so there is a notch through all the length. Then adding epoxy and inserting a strip of leather.
Later cutting the leather out so there is a border sticking out around the entire front of the rest
 
Is there anything to keep it from sliding.. like weights on the back edge or something sticky?
 
Yes, there is a straight piece of steel embedded through the rest through the length(they are quite heavy) and a rubber bottom
 
Dings on cues

JimS said:
Is there anything to keep it from sliding.. like weights on the back edge or something sticky?

There is nothing on this cue holder that will help avoiding shaft damage. I am sure that the sales will increase if that cushioning on the cue holder is added.
 
Just a suggestion

You need to mill a pocket on the inside of the radius. Then insert a piece of leather slightly thicker than the pocket. It will protrude past the wood slightly and provide nice protection for the shaft.
 
Nice product, craftsmanship looks pretty good! I see nothing wrong with this product causing any damage to cues (under normal conditions and/or use).

Zim
 
Zims Rack said:
Nice product, craftsmanship looks pretty good! I see nothing wrong with this product causing any damage to cues (under normal conditions and/or use).

Zim

Go ahead and by a batch of them then. Since you make your own cues you can probably repair them. I will buy one only where it has protection. I am not bad mouthing the product. For some reason about 100% of all the cue holders have protection for cues or they are made of a rubberized product.
 
I honestly would buy them, but I already have a friend that makes something similar! (not going to hijack this thread with details, will start one later)
I think the only reason that the other cue holders are made of rubber/plastic is cost and time to produce. The other ones are made from molds (most likely) and not hand made like these are. As long as the wood is rounded and smooth with no sharp edges, they are just as safe as the others. You risk bumping your shaft on a pool table more times a night than you would putting it in this rack/holder.

I see the concerns, really! That's also why I'm not a fan of any cue holder that uses the plastic clips to hold shafts, it has a higher potential to put small grooves in your shaft.

Zim
 
I have used my cue rest from CueBux during 9 Ball League play and my friend has used one as well and my cues are fine. I have a Joss West playing cue and a Mezz break cue and the rest keeps them safe. I agree with Zim that the rounded edges offer more than adequate protection and there is far greater risk banging a cue on the table.

Wedge
 
bestkites said:
Go ahead and by a batch of them then. Since you make your own cues you can probably repair them. I will buy one only where it has protection. I am not bad mouthing the product. For some reason about 100% of all the cue holders have protection for cues or they are made of a rubberized product.

Sounds like bad mouthing to me. If you don't like the product or the guy, just stay the hell out of his thread.

My Brunswick spectator chair just has a wooden notch to rest the cue in, no extra padding, and it works just fine.

http://www.brunswickbilliards.com/brunswick_collection/furniture/bar_stools_chairs/players_chair.html
 
Back
Top