Diamond W Dolly pool table measurements

[SirShootalot]

Specifically looking for measurements of:
Diamond 7' Pro Am, Blue label, when on a Diamond dolly / cart.
need total measurements of everything in that status. (floor to top etc.).

Also, when on the dollies, can they be trucked that way or is damage likely?
Do they need to be removed from the dollies for travel?

 

[easy-e]

When you say dolly, do you mean the carts that are made for them? If so, I had mine moved across the country on one in a truck and I can’t think of a safer way to transport it. There are a couple of spots that you might want to lay a towel or something between the table and the cart since they could rub and remove some of the finish.

 

[Black-Balled]

I figured you were a dolly fan.

 

[ChrisinNC]

Specifically looking for measurements of:
Diamond 7' Pro Am, Blue label, when on a Diamond dolly / cart.
need total measurements of everything in that status. (floor to top etc.).

Also, when on the dollies, can they be trucked that way or is damage likely?
Do they need to be removed from the dollies for travel?

94-1/2" long, 54'1/2" wide, 17" deep with legs not on it, 32" deep with legs on it. That is the table measurement only - not the dolly measurement.

 

[SirShootalot]

With Dolly

Thanks but I need the measurements WITH the dolly included.
What I mean is:
The total measurements with the table on the dolly. Example... if the table were 35" high on it's own base, but leaned on an angle on the dolly making it 52" high and the dolly lifted it 10" off the floor then the height would be 62" high. These are just made up numbers.
Can someone give me the exact / accurate measurements.
I would think those that move and deliver them would know.

 

[ChrisinNC]

Thanks but I need the measurements WITH the dolly included.
What I mean is:
The total measurements with the table on the dolly. Example... if the table were 35" high on it's own base, but leaned on an angle on the dolly making it 52" high and the dolly lifted it 10" off the floor then the height would be 62" high. These are just made up numbers.
Can someone give me the exact / accurate measurements.
I would think those that move and deliver them would know.

You'll need to contact Diamond to get that info.

 

[easy-e]

You'll need to contact Diamond to get that info.

Not necessarily. I can measure the cart dimensions when I get home, and he can add that to the table dimensions. Definitely get him within an inch or so. I’ll see if I can do it tonight.

 

[realkingcobra]

Specifically looking for measurements of:
Diamond 7' Pro Am, Blue label, when on a Diamond dolly / cart.
need total measurements of everything in that status. (floor to top etc.).

Also, when on the dollies, can they be trucked that way or is damage likely?
Do they need to be removed from the dollies for travel?

I have some 7fts on dolly's in the back of my truck, I'll measure the height after I have some coffee this morning.

 

[SirShootalot]

Thank you Easy-e and Realkingcobra, that would be very helpful.
Please try to give me all the measures, as it sits on the dollies.
I need to know the minimum dimensions, in all directions, as accurately as possible.
I await.
Hey Realkingcobra, if those 7' are in your way on the truck and a burden, you can get rid of them at my place... I wont even charge you to get rid of them

 

[realkingcobra]

Thank you Easy-e and Realkingcobra, that would be very helpful.
Please try to give me all the measures, as it sits on the dollies.
I need to know the minimum dimensions, in all directions, as accurately as possible.
I await.
Hey Realkingcobra, if those 7' are in your way on the truck and a burden, you can get rid of them at my place... I wont even charge you to get rid of them

If they wasn't sold already, they wouldn't be in the back of my truck already...LOL

 

[realkingcobra]

Specifically looking for measurements of:
Diamond 7' Pro Am, Blue label, when on a Diamond dolly / cart.
need total measurements of everything in that status. (floor to top etc.).

Also, when on the dollies, can they be trucked that way or is damage likely?
Do they need to be removed from the dollies for travel?

Why are you wanting to know the measurements for, maybe I can simply address your concerns.

 

[trentfromtoledo]

Why are you wanting to know the measurements for, maybe I can simply address your concerns.

You'll need to contact Diamond to get that info.

You might get more information if you described your situation in detail and not sound so demanding/ surprised that people in the business have never measured the table and dolly together.

I always make sure the roof of what I am moving is higher than it needs to be and not just for the table to fit, also so I don't hit my head on the roof ! You also have to take into account the degree of angle of the ramp going into said vehicle, but, if it has a lift gate would be even easier.
A box truck or hightop van will work perfect. Strap the cart down and go on your way. Enterprise Cargo is a great source for a vehicle, Penske also has good vehicles, but, they are much more expensive. As for a ramp to get the dolly up, you are on your own there!! RKC is a great person to ask, but, as I thought, most people have never measured that. Good luck to you.

Trent from Toledo

 

[realkingcobra]

Specifically looking for measurements of:
Diamond 7' Pro Am, Blue label, when on a Diamond dolly / cart.
need total measurements of everything in that status. (floor to top etc.).

Also, when on the dollies, can they be trucked that way or is damage likely?
Do they need to be removed from the dollies for travel?

61" tall, 98" long, 23" wide, and 950lbs.

 

[SirShootalot]

You might get more information if you described your situation in detail and not sound so demanding..
Trent from Toledo

I did not feel that I was in any way demanding. I merely asked a question.
Asking questions is normal. We share information amongst ourselves in the pool industry.
I demanded nothing. I only asked.

 

[SirShootalot]

RealKingCobra, Thank you very much. That was kind of you.
I assume that included the dolly also.
This was very helpful.

 

[realkingcobra]

RealKingCobra, Thank you very much. That was kind of you.
I assume that included the dolly also.
This was very helpful.

That's ON the dolly buddy.

 

[SirShootalot]

Thank you, this was kind of you.

 

[realkingcobra]

Thank you, this was kind of you.

Answering questions, that's my job...LOL

 

[trentfromtoledo]

I did not feel that I was in any way demanding. I merely asked a question.
Asking questions is normal. We share information amongst ourselves in the pool industry.
I demanded nothing. I only asked.

First off, how could anyone tell you were in the industry??
Secondly, You edited what I said:
"You might get more information if you described your situation in detail and not sound so demanding/ surprised that people in the business have never measured the table and dolly together. "

Thirdly,You also posted on my FOR SALE thread:

"What are the correct measurements for a Diamond Blue Label, 7' Pro Am, assembled, when on a diamond cart / dolly?
Looking for ALL dimensions including cart.
Can they be loaded into a truck for transport and kept on the dollies during the drive?
Are they more vulnerable to breakage in that way?"
THEN YOU POSTED HERE...

Finally there is this: you never said what you were doing or that you were even in the industry. Usually some sort of could you, or please tell me or anything along those lines would help more.... Lucky RKC is a nice guy and can't resist answering people!

GOOD LUCK.

Trent from Toledo

 

[SirShootalot]

Bashing NOT needed

First off, how could anyone tell you were in the industry??
Secondly, You edited what I said:
"... your situation in detail and not sound so demanding/ ... "

Thirdly,You also posted on my FOR SALE thread:
"..."
THEN YOU POSTED HERE...

Finally there is this: you never said what you were doing or that you were even in the industry. Usually some sort of could you, or please tell me or anything along those lines would help more.... Lucky RKC is a nice guy and can't resist answering people!

GOOD LUCK.

Trent from Toledo

A) I am entitled to edit unimportant information anytime I desire. This is why the ability to edit is enabled in this forum.

B) In your mind only, it was demanding. Helping you to understand your interpretation of the world, is not my job. Furthermore, there was no reason for superfluous data such as why I needed the in formation or more detail. It was a simple question with a simple answer, that others were very kind in answering, WITHOUT a negative attitude.

C) I may have mistakenly posted on YOUR other thread. Then, realizing such, tried to correct by creating this new thread. NOT a hanging offense.

D) There was absolutely NO reason to have to state my being in the industry nor exactly what I was doing. Use your imagination... why would anyone want to know those dimensions on a dolly and if transporting while on the truck was a good idea????? Now think real hard on that one. (facetiousness intended).

E)

Usually some sort of could you, or please tell me or anything along those lines

So it seems you are upset because I did not say PLEASE. ?! If you applied some self introspection, you would discover your lack of proficiency in manners, to be quite prominent.

F) Meanwhile you PM me trying to find out if I want to buy a table. With an offensive attitude like yours I would NOT buy a table from you nor employ you. I've seen some of your other posts where you get into flame wars with others. DO NOT try that with me.
I have no interest in communication with you as long as you choose to be aggressive, antagonistic, offensive and derogatory.
Now trentfromtoledo DO NOT escalate this any further. You have had your say, multiple times. You finally got a response from me.
This forum is NOT for your type of behavior.
Any further communication, from you, is your attempt to create animosity and agitation.

Leave me alone.