do the pros outweigh the cons when using quality shaft wax?

you guys put wax on your cues...? Wild...

My cue guys seals my shafts with something once every +6mths and I clean occasionally with a damp golf towel.
Probably a water based urethane. Works great with a lathe, Bullseye sealcoat shellac works great also. A lot of the commercial products sold to seal cue shafts are a form of water based urethane, 3m makes some good ones.
Wax feels good for a bit, but needs to be reapplied and can be a dirt collector.
 
Last edited:
you guys put wax on your cues...? Wild...

My cue guys seals my shafts with something once every +6mths and I clean occasionally with a damp golf towel.

One of many things I tried. Your cue guy may be putting a touch of wax on your cue. It isn't for looks and a tiny tiny amount is all it takes if someone wishes to go that route.

Hu
 
IMG_5405.jpeg
 
I have tried random waxes, including the fancy ceramic car waxes, never had issues with it being sticky if you wipe it off properly.
One funny thing with wax, I tried some on a good carbon fiber shaft, it made it so slick I had to wipe it all off because it felt un-natural sliding through my fingers.
 
I keep my shafts very clean so I wipe them down with alcohol or a Magic Eraser finish up with a drop of Slik Stix . The bottle I have is at least 20 years old . Amazigly slick finish .

Chuckg
 
I used synthetic sealer on one shaft; let it soak in multiple times. Follow up with regular Iso Alc/magic eraser and synthetic car polish. The polish is the slickest I've found and the sealer, well going on 4 years, no blue shaft.
 
Renaissance. I used Q-Silk for many years, but Renaissance is better, but only like 9.9 to 9.0. I live in the land of humidity and mosquitoes. I will only listen to folks from NOLA/Louisiana and Houston on these subjects. Everyone else, sit down. Clean, well-finished, shafts are critically important to my game. Anyone who has ever been down here and played in a well attended pool tournament during which the facility's A/C unit has lost, or is losing, the battle knows whereof I speak. So . . . when I found Q-Silk, I considered it a gift from God, borne to earth in the hands of seraphs from on high, and now I have found Renaissance.

Some of you say "glove", but I disagree and will spare you a fully descriptive reply in favor of a single question: How do you truly feel about sex while wearing a condom? Its about the same thing to me -- "Yeah, okay, but I'd rather not."

I have never experienced any build-up or residue with Renaissance. In fact, if I were pressed to find any fault, I would say it does not last long enough. But, all things considered, I can live with cleaning and polishing my cue every month, or so.

If I ran Renaissance, we would offer it in single use packs with counter top displays for pool hall sales. The more folks who tried it, the more they could sell. I can only conclude they don't need any more business.
 
Last edited:
Some of you say "glove", but I disagree and will spare you a fully descriptive reply in favor of a single question: How do you truly feel about sex while wearing a condom? Its about the same thing to me -- "Yeah, okay, but I'd rather not."
My thoughts exactly. I've tried a glove several times, even back 20 years ago when they were not common at all. I just lose too much feeling in my bridge hand. Maybe I shouldn't be using my bridge hand to feel with but it works for me and I like how it feels. Skin to skin or it don't go in! 😁
 
you are kidding, right? you have heard of this, right?
Nope... never heard until now. I'm a shut-in. I'm allowed out once in a while to play outside. As for shaft cleaning... I'm a current REVO user but for wood I do have a lathe. I might use 0000 and QWax. Lately the V10 eliminates cleanings. Any shaft wax is suitable if applied correctly...otherwise it can be binding.
 
I use Butchers wax. Gus Szamboti used it.....I think he was a pretty smart fella about cues.

Ken

This is the stuff I mentioned in post fourteen. A big can that will last you and all your friends a lifetime was under ten bucks when I bought it about twenty years ago. Even if it costs twice that now it is a deal.

Hu
 
Nope... never heard until now. I'm a shut-in. I'm allowed out once in a while to play outside. As for shaft cleaning... I'm a current REVO user but for wood I do have a lathe. I might use 0000 and QWax. Lately the V10 eliminates cleanings. Any shaft wax is suitable if applied correctly...otherwise it can be binding.
I think it's so surfers don't slide off their boards. Big clue about anything called wax.
 
Did some searching here and many seem to like wood shaft waxes like Renaissance, Longoni, Molinari and others. Some have reported the wax melting or getting sticky in warm conditions. Others say it is expensive (first two I mentioned) to very expensive (Molinari). Others have said they don't like the odor (first one I mentioned).

I have played with maple wood (non-LD) shafts for for over 40 years and never used a shaft wax before. I wipe the chalk off my tips before putting away my cues after playing using a clean dry paper napkin. For shaft cleaning, I use a magic eraser sheet (sometimes with 90% alcohol or white gas) and finish with the green side of the Q-Wiz. If I need a deep clean, I use 800 sandpaper on the shaft.

Should I give it a try? Longoni seems like the first one I try, given its price point, no smell and similar to Renaissance but not as hard. If I did get some, I recently bought a kielwood shaft that has a very tight fitting threaded insert on all of my 3/8x10 joint pins (some modified, some not). Can I use Longoni wax there also to help the threading issue? Will I get any chalk dust or dirt gathering there or on any of the shafts I apply it on if I go with the Longoni?

TIA
Opinions vary, but I can't imagine the need to put wax on cue shafts. Sooner or later it's going to get sticky. The old masters finished shafts with sanding sealer, finished by either very fine sandpaper, or steel wool. I get just as good results with Cue Slick after the finest sanding, followed by each of the cue papers. Your hands further finish and seal the shaft. No need for wax, in my opinion.
 
Back
Top