Auction info? Will there be a raffle in the wanted for sale section? Thx and good luck, John
donations for auction benefit
- Thread starter DavesCueRepair
- Start date
If my cue is not done in time for the Auction. I will talk it over with Dave about an AZbilliard raffle. Maybe I can take your bid over the phone if you see something you want. We would have to talk that over with Dave.
Last edited:
Will there be pics? A list of the available items? Thx, John
Yes I will take some pics and post them on here
Sent from my Desire HD using Tapatalk
Sent from my Desire HD using Tapatalk
Hello to all my az friends. I just wanted to say thank you very much for the donations we have received so far. And we will be taking phone bids on the items at the auction. I will post pics of the items in the auction and post them on here for you to look at. Thanks Dave
I want to give a special thanks to Customcuelathe, QMaker, Russell Cues, Jaydog468, Blue Hog Ridr, Fishinpoolplayer,Joeyincali, Hangemhigh, and Cueman, for their donation to help with the benefit. I would also like to thank AZBILLIARDS for letting me post a thread about my benefit. I would also like to thank Joe Picone who called me and gave me some very valuable information for some Ins. I would also like to thank ChampionsRepair for buying my cue repair lathe....... GOD BLESS YOU ALL and thank you all from the bottom of my heart... Dave
Sent from my Desire HD using Tapatalk.
Sent from my Desire HD using Tapatalk.
You are entirely welcome. It is more blessed to give than to receive.
Here is a couple pics of the cue I am donating for the auction for my benefit. This cue will be done in time for the benefit. The cue is Cocobola and Striped Maple forearm with gray veneers. With cocobola ring work, butt sleeve is the same as the forearm with a Black ABS butt cap.On the handle it will have tan leather wrap. This is 1 of the 1st cues I have built. It has taken me 8 months to build with me taken my time on my 1st cue. So far it has turned out perfect. I hope in the future I will be able to build more cues. Building cues has always been my dream. Thanks, Dave.
Sent from my Desire HD using Tapatalk
Sent from my Desire HD using Tapatalk
Attachments
Last edited:
We are still hoping that more cue makers will donate a custom cue for the benefit auction. We want it to be a great success. Their will be alot of pool players at the pool tournament and alot of phone bidders for the auction. Thanks Dave
Paypal info davescuerepair@yahoo.com
Paypal info davescuerepair@yahoo.com
My Donation
This is the cue I will be sending you for your auction. It just need to finish out the shaft tomm and I will get it in the mail on Sat. The front and butt is Logan Berry, the rings are double check ivory, the joint is buffalo horn.
Hope this helps you out. The pics turned out a little funky but you get the idea.
Tony
Russell Custom Cues
This is the cue I will be sending you for your auction. It just need to finish out the shaft tomm and I will get it in the mail on Sat. The front and butt is Logan Berry, the rings are double check ivory, the joint is buffalo horn.
Hope this helps you out. The pics turned out a little funky but you get the idea.
Tony
Russell Custom Cues
Attachments
Ebony and Straight Grain Maple for Dave!
Dave, Finally I was able to finish up this cue for your benefit auctiion. I hope with the addition of my cue and all of the other donations, you will recieve some of the financial help you need in this tough time in your life. I will be shipping it out to you today. You are in are prayers.
Cue Specs:
Ebony Fullsplice into Straight Grain Maple
Check Maple/Ebony Ringwork @ A, B, & E
Straight grain maple long buttsleve
3/8-10 Modified Brass Pin
Premium AAA Maple shaft 12.8mm
Elforyn 5/8" long Ferrule Morri M Tip
15.4 oz butt - 3.8 oz. shaft = 19.1 oz
[/IMG]
[/IMG]
Dave, Finally I was able to finish up this cue for your benefit auctiion. I hope with the addition of my cue and all of the other donations, you will recieve some of the financial help you need in this tough time in your life. I will be shipping it out to you today. You are in are prayers.
Cue Specs:
Ebony Fullsplice into Straight Grain Maple
Check Maple/Ebony Ringwork @ A, B, & E
Straight grain maple long buttsleve
3/8-10 Modified Brass Pin
Premium AAA Maple shaft 12.8mm
Elforyn 5/8" long Ferrule Morri M Tip
15.4 oz butt - 3.8 oz. shaft = 19.1 oz
That is 1 beautiful cue Jon it should go for a great price at that auction. Thank you from the bottom of my heart. Thank Dave
Dave I sent my cue out with UPS this morning. They said it should reach you by Thursday.
Thank you so much Tony we will be looking for it
Sent from my Desire HD using Tapatalk
Sent from my Desire HD using Tapatalk
Hello Dave,
Just checking to see if the cue made it there ?
Tony
Just checking to see if the cue made it there ?
Tony
Yes Tony it made it lastnight it is a very beautiful cue. Thank you so much. Dave
Sent from my Desire HD using Tapatalk
Sent from my Desire HD using Tapatalk
Hi David,
Did the Kamui Chalk Make it there?
LMK,
John
Did the Kamui Chalk Make it there?
LMK,
John
Yes John it made it thank you very much Dave
Sent from my Desire HD using Tapatalk
Sent from my Desire HD using Tapatalk
I know I am going sound dumb here but there was a custom cue maker that call me from on here some time back said he was donating a custom cue and his friend was donating a custom cue case and a jump/break. I lost the note pad with his name and #. So if the cue maker reads this post can you plz call me again. Thanks Dave
979-533-4943
Sent from my Desire HD using Tapatalk
979-533-4943
Sent from my Desire HD using Tapatalk
Last edited:
Mrs. Hillbilly
Registered
Updated Benefit Flyers
