F/S Early Chris Hightower Repair Lathe

cuesterpat

cuesterpat

AzB Silver Member
Silver Member
This is early model Chris Hightower repair lathe (converted wood lathe) that I am selling for the wife of a very close friend that passed away last October. The lathe is in good operating condition and includes many extras including: the work bench it is mounted to, the tenon machine in the picture, a Porper linen press, assorted size shaft pins, assorted Irish linen, some old cue parts and shafts including a few new shaft blanks, and lots of tips, ferrules, joint collars and other repair parts. This lathe is excellent for doing tips, cleaning shafts, putting on Irish linen wraps (lathe has a separate wrapping motor included), and other repairs. Due to it’s size and weight this lathe and all that is including must be picked up and shipping it is not an option. The lathe is located outside of Philadelphia, Pa. arrangement can be made with me and Mike’s wife to show the lathe and extras in person. Price lowered to SOLD per advice from Chris Hightower. See the last post for his comments. for everything I mentioned.

Please feel free to PM or email me at ****@***.com if you have any questions or for additional pictures.

Thanks,

Pat
 

Attachments

  • Lathe1.jpg
    Lathe1.jpg
    98.6 KB · Views: 2,114
  • Lathe2.jpg
    Lathe2.jpg
    93.9 KB · Views: 2,103
  • Lathe3.jpg
    Lathe3.jpg
    96 KB · Views: 2,113
  • Lathe4.jpg
    Lathe4.jpg
    97.4 KB · Views: 2,111
  • Lathe5.jpg
    Lathe5.jpg
    90.9 KB · Views: 2,102
Last edited:
Early Hightower Lathe.

My buddy bought the lathe new along with a how to video along with quite a bit of other stuff directly from Chris Hightower. He wanted to get into cue repairs and possible try to make pool sticks. He did a lot of tip work, refinishing of shafts, Irish linen wraps with lathe. He actually made a hand full of shafts using blanks he purchased from Prather cue parts.
 
Early Hightower Lathe

Thanks for updating the post Chris. My friend's name was Mike Parkhill. He bought the lathe and other cue repair related items from you.
 
Hightower Repair Lathe

Bump for almost everything someone would need to start repairing cues.
 
Hightower Repair Lathe

Asking price has been lowered to Best Offer!!!
 
Last edited:
Hightower Repair Lathe

Price lowered to Best Offer for the lathe and whole lot of cue repair items!!!
 
Last edited:
Hightower Repair Lathe

Still available and for sale. My buddy spent thousands on what is for sale here.
 
Lathe back for sale.

The deal that was pending for the lathe fell through. The lathe and everything included is back up for sale or trade.
 
Hightower Repair Lathe

Please read the note from Chris Hightower below. The price has been lowered to $600.00 for everything.

"Hi,
I noticed that lathe has still not sold. Because many of the functions are primitive by todays cue lathe standards and Mid Size Cue Smiths sell for around a $1000 used. I am guessing you are going to have to lower that price to about $650 to sell it. I know that is not good news, but the lathe is 20 plus years old and not as accurate as todays machines.
Here is what I would do if I wanted to sell it for the most money possible. I would takes the Taylor ferrule machine off and sell it separately for $150 and ask $600 for the lathe with the other extras.
You might wind up with $750 that way.
Thanks,
Chris

Chris
www.cuesmith.com
www.hightowercues.com
www.internationalcuemakers.com"
 
Hightower Repair Lathe

The lathe and extras have been sold. My friend's wife and I thank everyone for their interest.
 
You must log in or register to reply here.
Back
Top