Reduced Price! PFD Studios Ebony4p/4v John Davis F/S(First One) Price Reduced
[/COLOR]
Beautiful Paul Drexler - PFD Studios cue made from a John Davis full splice ebony blank. This is truly a one of a kind cue. Veneers are black, red, black, maple. Radial pin, thinwall stainless joint over phenolic. The cue has a black kangaroo leather wrap and the butt sleeve has a unique Black Lip mother of pearl wedge with matching veneers. Black Lip MOP is rare and very expensive and extremely beautiful. On the other side of butt sleeve a nice oval w/pfd logo scrimshawed into it. The logo panel and ferrules are ivory. The butt weights 14.9 oz. Because it's a Davis blank (made with his unique construction method) it has wonderful balance and is much lighter than a normal ebony full splice cue would be, and was the first cue Paul made with a John Davis blank.
Two 13mm, 29" shafts included. Shaft #1 (black pad) is almost new, 3.8 oz. Paul made it last spring. It has a carbon fiber core that he said is about 1/8" diameter and runs from the tip to near the joint. Shaft #2 (red pad) has seen more use and weighs 4.3 oz. Both are super premium shafts, both have Talisman medium tips. The cue weighs 18.7 or 19.2 ounces depending on which shaft is used.
The veneers around the MOP wedge were also done by Davis and sent with the blank.
Cue hits nice and solid, with some spine and no excessive vibration. Rolls straight t/g and apart. Cue is in great condition
thanks for looking,
keeb-
[/COLOR]
Beautiful Paul Drexler - PFD Studios cue made from a John Davis full splice ebony blank. This is truly a one of a kind cue. Veneers are black, red, black, maple. Radial pin, thinwall stainless joint over phenolic. The cue has a black kangaroo leather wrap and the butt sleeve has a unique Black Lip mother of pearl wedge with matching veneers. Black Lip MOP is rare and very expensive and extremely beautiful. On the other side of butt sleeve a nice oval w/pfd logo scrimshawed into it. The logo panel and ferrules are ivory. The butt weights 14.9 oz. Because it's a Davis blank (made with his unique construction method) it has wonderful balance and is much lighter than a normal ebony full splice cue would be, and was the first cue Paul made with a John Davis blank.
Two 13mm, 29" shafts included. Shaft #1 (black pad) is almost new, 3.8 oz. Paul made it last spring. It has a carbon fiber core that he said is about 1/8" diameter and runs from the tip to near the joint. Shaft #2 (red pad) has seen more use and weighs 4.3 oz. Both are super premium shafts, both have Talisman medium tips. The cue weighs 18.7 or 19.2 ounces depending on which shaft is used.
The veneers around the MOP wedge were also done by Davis and sent with the blank.
Cue hits nice and solid, with some spine and no excessive vibration. Rolls straight t/g and apart. Cue is in great condition
thanks for looking,
keeb-
Attachments
Last edited:
