FS/FT Josey Fancy Sneeky, Wrap less Woodworth, Wrap less Jacoby!!

Cuemaster98

Cuemaster98

AzB Silver Member
Silver Member
Hi Guys,

Here are some cues that I'm looking to sell or trade up/down.

1) Schon SP: 1200 Shipped

Ebay Listing: http://www.ebay.com/itm/Beautiful-Sc...item23386aeeb2

Ivory Inlay, Short Ivory Points, Amboyna Burl with 10 Points.

Butt weight in at 14.83oz with Radial pin, phenolic collar and newly installed real lizard wrap.

Orginal shaft is 3.89oz with 13mm Hard Molavia installed.
CM360 shaft is 3.50oz with 12.90mm, Hard Molavia

Cue was brand new and test hit only but has some minor blemish on the collar in the butt. Straight together and apart

731562939_o.jpg



2) Wrap less 6 points Woodworth Custom cue with 2 shafts - $750 shipped
Butt: 15.26 oz, 3/8-10 wrap less, very slight taper roll at the a-joint.
S1: 4.26oz, 12.88mm, Medium Moori, Straight
S2: 3.72oz, 12.49mm, Medium Moori, Slight roll out

753371637_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/753371631_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/753371640_o.jpg

3) 2008 Wrap less Sectional Jacoby with 1 shaft - $SOLDshipped

Butt: 15.22oz, Radial Pin, Wrap-less sectional with fancy ivory and turquoise dot inlays.
Shaft: 3.80oz, 13.00mm, Straight.

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/753371562_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/753371565_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/753371559_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/753371548_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/753371545_o.jpg

Spec will be updated later tonight.

4) Paul Drexler ebony and tulipwood custom cue with 2 shafts - $SOLD shipped.

The butt is dead straight and all shafts are straight together and apart.

This PFD cue has a very unique joint that is made of Silver & Copper combined in a process called Mokume-Gane.
The joint collar alone cost 300.00.

The cue has 5 tulipwood points with ebony outline inlays into jet black ebony wood with the same design in the butt sleeve.

The Butt weigh in at 17.20 oz due to ebony wrap less handle but it's so well balance you don't feel the weight that hit super solid.

The cue has a epoxy black Radial pin and is 29" long.

Original Shaft 1: 3.57oz, 12.82mm, Medium Moori, 29" long
Original Shaft 2: 3.45oz, 13.00mm, Original Tip, 29" long.

Cue roll straight together and apart. Only blemish seem to be in the bumper area per pics.

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/749724354_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/749724351_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/749724357_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/749724349_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/749724347_o.jpg


5) Custom CM360 made from a 1930 James Reiper blank. $2200.00


This conversion was done by me with help from Mike Miller on all the inlays.
Butt: 15.75oz, 3/8-11 brass pin, wrap less full splice, Ivory Joint, Ivory Butt Cap.
Shaft: 3.67oz, 12.95mm, Medium Kamui black
CM360: 3.76oz, 13.05mm, Hard Molavia

750539385_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/750538497_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/750538511_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/750539391_o.jpg
Straight Together and apart.

Cue #6) Jim Buss Sneeky conversion with Mezz Break shaft and original shaft. $400.00 Shipped.[/B]

Butt: 15.53oz, 5/16-14 pin, SS collar, wrap less, dead straight
Original Shaft 1: 3.94oz, 12.45mm. Slight roll out

757142967_o.jpg

http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/757142969_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/757142974_o.jpg


BR,
Duc.
 
Last edited:
You must log in or register to reply here.
Back
Top