FS: Prulhiere Bubinga Custom with stack leather wrap and extra Mottey shaft- CHEAP!

ALiu

Registered
SOLD

This was my main playing cue for the past few months, and was heavily used (few hours each day). As such, both shafts have bluing, and the ferrules have some chalk stains/scratches as well.

The Mottey shaft was bought from user Neilhin here on this forum, and is 12.25mm. Black joint collar. Has a slight roll, enough for the tip to lift off slightly when rolled on the table with the butt. This shaft was my main playing shaft, and shows the most bluing. There are a few small dents/maybe chips in the finish near the joint.

The Prulhiere shaft is about 12.75mm, and has a taper roll near the back half of the shaft, although the bridge portion rolls true. Tip stays on the table when rolled with the butt.

Both shafts have Moori quick tips with red fiber pads underneath.

The butt has a warp in the handle, no joint lift when rolled, although the butt end does wobble slightly. Stack leather wrap, natural unstained finish with a more textured finish rather than the mirror smooth type usually seen. The rings near the wrap lift slightly, the back black ring is more noticeable.
As this cue was used as my daily player, the butt cap is missing finish near the rubber bumper, as you can see in the pictures (seems to be from using an extension). Also, there is some slight finish issue on the joint collar, it's a little scuffed, and it seems to be a thin topcoat of finish missing from a small portion of it, although it is still glossy underneath. There are a few tiny dents/dings in the forearm of the cue, but nothing through the finish.

The cue weighs about 19oz currently (maybe a little under), with a 2oz. weight bolt, I will include another 1oz. weight bolt also if you wish to bring the weight down to 18oz.

Comes with joint protectors for both shafts and the butt.

This cue plays awesome, and I'm selling it as I'm looking to recoup some funds from the purchase of my current playing cue.

p1011283b.jpg

p1011284.jpg

p1011287f.jpg

p1011290v.jpg

p1011292.jpg

p1011294c.jpg

p1011295n.jpg


**Do not expect perfection, there is a lot of small details and issues to note about the cue. I have tried to list as many as I can remember.

Thanks all!

EDIT: Just received the Mottey shaft back. I will take $70 shipped for the Prulhiere cue alone, or $135 for the cue + the Mottey shaft.
 
Last edited:
Bump. With the mods having to approve this thread and everything...already started out in the back of this forum.
 
That's a good price for someone looking for a cheap player. And......thank you for being so forthright and honest in your descriptions.

GLWS.

Maniac
 
Price drop. $70 shipped. Can it really get any cheaper than this for a nice playing cue?

I really need this gone.
 
I had an opportunity to inspect the Mottey shaft, thanks Andrew, and if it were the correct joint pin size, it would be mine. I can say this is a really good shaft, and makes this setup the best deal available on AZB right now.
 
Back
Top