Full Splice Custom Cue For only $195 shipped **SOLD**
We are clearing out most of our old inventory for new stock this upcoming summer. We are looking forward to introducing our new line of full splice cue and custom shafts after months of experimenting with new innovative tapers, construction technique and different pins.
For sales is player cue that was design with a parabolic taper laminated shaft and a hand selected full splice blanks with the very tight and straight grain maple forearm. The finish on the blank is not the greatest but it clean. The cue has a gold radial pin from atlas and installed in our shop in Canada. The cue is straight and may have a roll that is due to our custom taper shaft. The shaft is actually thicker near the end than the end of the shaft. Please note some of the points are touch up to make sure they are all even..just making look nicer..nothing that you will notice.
The cue weigh in at 14.4oz with the shaft at 4.4oz 13mm with a hard Molavia tip. Well balance and plays great. We also have these some left with the 3/8-11 pin (5 left), 3/8-10 pin (2), 5/16-18 (Nearly finish wo shaft) and 5/16-14 with wrap (2). These all have the parabolic shaft taper that were custom made for us by Joel Weinstock. All of these cue have all been test hit and lightly played (Play Solid..with 100% feedback and feel)
I will let the pics describe the rest of the cue. Any question, email me at dlam0718@gmail.com.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/44483759_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/44483066_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/44484024_o.jpg
Regards,
Duc.
We are clearing out most of our old inventory for new stock this upcoming summer. We are looking forward to introducing our new line of full splice cue and custom shafts after months of experimenting with new innovative tapers, construction technique and different pins.
For sales is player cue that was design with a parabolic taper laminated shaft and a hand selected full splice blanks with the very tight and straight grain maple forearm. The finish on the blank is not the greatest but it clean. The cue has a gold radial pin from atlas and installed in our shop in Canada. The cue is straight and may have a roll that is due to our custom taper shaft. The shaft is actually thicker near the end than the end of the shaft. Please note some of the points are touch up to make sure they are all even..just making look nicer..nothing that you will notice.
The cue weigh in at 14.4oz with the shaft at 4.4oz 13mm with a hard Molavia tip. Well balance and plays great. We also have these some left with the 3/8-11 pin (5 left), 3/8-10 pin (2), 5/16-18 (Nearly finish wo shaft) and 5/16-14 with wrap (2). These all have the parabolic shaft taper that were custom made for us by Joel Weinstock. All of these cue have all been test hit and lightly played (Play Solid..with 100% feedback and feel)
I will let the pics describe the rest of the cue. Any question, email me at dlam0718@gmail.com.
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/44483759_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/44483066_o.jpg
http://img.auctiva.com/imgdata/0/3/9/5/3/2/webimg/44484024_o.jpg
Regards,
Duc.
Last edited:
