Gold Crown 3 bolts

[JoseV]

Ok I have A bag of bolts for my table, I want to make sure I got them all before the guy cones by to install the table.

First pic, 7 of these.

2nd pic 4.

3rd pic 18, each has two washers.

4th pic two sets of different screws and 10 smaller bolts

5th pic 18 washers and 8 bolts.

What else am I missing .

Thank you.

Sent from my SM-N920P using Tapatalk

 

[realkingcobra]

Ok I have A bag of bolts for my table, I want to make sure I got them all before the guy cones by to install the table.

First pic, 7 of these.

2nd pic 4.

3rd pic 18, each has two washers.

4th pic two sets of different screws and 10 smaller bolts

5th pic 18 washers and 8 bolts.

What else am I missing .

Thank you.

Sent from my SM-N920P using Tapatalk

I have no idea where the bolts in your first 2 pictures go as they don't belong to a GC.

 

[pocket]

Based on the size of the photos I believe these belong to a highway billboard sign.

 

[kid]

Are you sure you have a gold crown? None of these screws and bolts look original. Maybe you have a chinese knock off


Envoyé de mon iPhone en utilisant AzBilliards Forums

 

[JoseV]

Not a knock off.

Sent from my SM-N920P using Tapatalk

 

[realkingcobra]

You've got a mess buddy

 

[realkingcobra]

Well, lets see the rest of the mess.

 

[JoseV]

First is side skirts short,short skirts and the ball box and two smaller skirts and the center brace ? Not sure or name, but it's standing up right.

2nd pic is the legs

3rd is the frame slate and gully system. Not pictured is pockets one left side on right, to pockets that say head and two pockets that say foot. And casting 4 corners and two sides.

Sent from my SM-N920P using Tapatalk

 

[JoseV]

Also the the rails are not pictured they are getting redone.

Sent from my SM-N920P using Tapatalk

 

[realkingcobra]

Well, just so you know, there are no carriage bolts or lag screw bolts used in the assembly of any GC, and i don't see any of the 1/2" bolts or washers used to mount the stretcher between the leg pedestals, there should be 4 of them as well. 18 rail bolts as well as 18 star washers.

 

[JoseV]

Ok, so I have 18 rail bolts that have a big washer and a smaller washer, so I just need to get 18 star washers and 4 1/2 " bolts with washers. Thank you RKC, this is a big help for me.

Sent from my SM-N920P using Tapatalk

 

[realkingcobra]

Ok, so I have 18 rail bolts that have a big washer and a smaller washer, so I just need to get 18 star washers and 4 1/2 " bolts with washers. Thank you RKC, this is a big help for me.

Sent from my SM-N920P using Tapatalk

You can call me is you have questions, 702-927-5689