predator
Shaping Your Tip
Predator research has clearly shown that a dime radius (or shape of a dime) will produce 5 percent to 10 percent less cue ball deflection than the more commonly used nickel shape. The cue ball deflection is reduced because the dime radius centralizes the hit to the center, or strong part, of the shaft.
What Burnishing Does For Your Shaft
The purpose of burnishing your shaft is to smooth and seal the wood. The more you burnish, the better the finish and, the slicker and more moisture resistant your shaft becomes. Moisture is the #1 enemy of your shaft. It causes the grain to raise and your shaft to warp. To burnish your shaft, use a leather burnisher and avoid abrasives. Sanding your shaft wears it down and makes the wood porous, which allows moisture to penetrate the grain and damage the wood.
Stay Away From Abrasives
Do not use any abrasives on your shaft and stay away from green pads in Pool Rooms. Using abrasives is going to take the diameter of your shaft down and modify the shape of your taper. It may even void the warranty of your Predator shaft if the ferrule or wood diameter falls below 12.25mm for 314 shafts and 11.4mm for Z shafts. Very fine micro papers (1500 grit) or burnishing is about all you need.
Break Cue Weight
Contrary to what many believe, lighter is better when choosing a break cue weight. Even though a heavier break cue feels more powerful, a more powerful break will be achieved with a cue weighing 18.5 to 19 oz. Most professional players break with a cue that is 1/2 to 1 oz lighter than their playing cue because less weight allows them to generate more cue speed, resulting in greater cue ball speed and a more powerful break.
