All you need is a cue with a tip on it !
Don't believe the hype it is the Indian not the arrow
The only thing you need for improvement is PRACTICE ! IMHO
Don't think sand paper, think polishing paper. When I'm done playing, and my hands are really dirty, I'll use the paper towel(don't want it wet, just slightly damp) I used to dry my hands with to wipe down my shaft and tip. Then I'll use the polishing paper for a few strokes, followed by the leather pad rather aggressively. The shafts ready to go for the next round of play.:thumbup2: You don't have to do this every-time, just when it starts to bother you, which could be every-time, if you're that sensitive/OCD to the feel. Don't put your shaft back in the case without wiping the chalk off the tip, it's an abrasive. Over time it'll accumulate in your case and work its way into your shaft and ferrule. I'm a little OCD about that and I don't like seeing chalk on the inside of a case.Hey guys, when buying equipment for the first time, is this going to be enough?
- a cue check
- a case or a sleeve A nice padded soft case will get you started. They can be had for about $25, no more than $50
- a tip shaper I like the Williards shapers, I feel they're the best on the market. They even malke one that has a tip tapper built into it.
- a dozen pieces of Masters chalk a piece of chalk lasts a long time, four will last you a year
- a cheap chalk holder not really necessary, I just put mine in my pocket. My pocket doesn't get that dirty from it, comes out in the next wash.
- a couple of reserve tips not really unless you're going to buy the equipment to put it on with
- a piece of sandpaperunless it's 2000 grit or better, no. I carry a leather pad for burnishing shaft and tip side, about 3x5 and 2500 grit polishing paper.
All you need is a cue with a tip on it !
Don't believe the hype it is the Indian not the arrow
The only thing you need for improvement is PRACTICE ! IMHO
Should have a Rule Book!
randyg
Whats your budget? The optional accessories you listed run maybe $20-$40. So, if your budget is $100, maybe its better to skip the accessories. If you're budget is $250, then it may not be out of line.
I find that a nice microfiber towel is handy for keeping your hands dry and to wipe off your cue after use. Not a "must have", but, a useful addition to your stuff.
All you need is a cue with a tip on it !
Don't believe the hype it is the Indian not the arrow
The only thing you need for improvement is PRACTICE ! IMHO
Hey guys, when buying equipment for the first time, is this going to be enough?
- a cue yup, you're gonna need that. Spend under $100 on something like an Action cue. Very nice cues for real cheap money. Find out if the pool interest is gonna stick (so to speak lol). Then try something a bit nicer once you learn what qualities might matter to you. the OB sneaky pete is maybe the best $350 or so you can spend. Great playing cue, nice shaft.
- a case or a sleeve Couldn't hurt. You can get a cheap sleeve for like 10 bucks.
- a tip shaper probably should avoid this. This is a great way to wreck your tips. Find a trustworthy and competent tip guy. Have it done right. You shouldn't need to shape a quality tip that is installed properly. If you are in MA or southern NH send me a PM
- a dozen pieces of Masters chalk Wow that's a lot to carry around. Put one or two in the case.
- a cheap chalk holder not at all necessary, but couldn't hurt
- a couple of reserve tips Again, probably not necessary. The Action cue (or OB or Predator or a million others) come with a Tiger Everest tip. This tip is pretty good overall. Perfectly fine to learn with. No point getting extra tips if you don't know yet what you like. Also, see above about the tip shaper. Find a tip guy
- a piece of sandpaper Scary stuff. How long do you want that shaft to be the diameter it is now? You can get some 1500 or 2000 grit sandpaper to just polish the shaft. Once you get under like 1000 grit you're really gonna be removing material. If the issue is that the shaft is sticky, the solution is not to sand away the top layer of the shaft. You clean it. You can use isopropyl alcohol. Get the 91% stuff. It's like a buck or so for a liter of it at CVS. Just use a paper towel and wipe the shaft down. It removes most surface dirt and hand grease and whatnot. They hit the shaft with that 2000 grit a little, and you should be good to go. For more deep cleaning, magic eraser is a great choice. You can use it dry any time, or moisten it *slightly* for a once a year type cleaning. After this the grain might be raised some...this is the one time you might go over it lightly with 600-800 grit paper, then polish with the 2000.
I agree with this. The cheap microfiber towels you get at auto patts store work great. They pull any moisture or oil from the shaft and your hands with ease.
To original poster....you keep saying something about sandpaper. Why? Leave it it the garage. Instead get a leather burnishing pad. Far better results without removing and material from shaft. I will stress this again.....FORGET THE SANDPAPER!