Ivory - Ban Fake Ivory

If it's plastic it will melt very easily and smell like plastic.

If it is ivory it smells like burning hair. It need not ignite to get the smell..


Yes, it damages the cue either way.

I'm not disagreeing because I've never tried it but I am skeptical that the hot pin will have any effect on the Ivory but it will melt the finish which will NOT smell like burning hair.
 
Hot

I am perplexed about this hot pin test. Ivory does not burn very easily at all so I do not understand how the hot pin would induce smoke. Ivory requires incredibly high temperatures (1800+ degrees) for an very long period of time and even then, the burn is usually too slow to destroy the ivory. Some level of burn from the pin would be necessary to create smoke. Of course, in the case of a pool cue, the hot pin would surely melt the finish although I don't think that smoke would produce this supposed smell of burning ivory (which does not burn).

Reminds me of the hoax burning stockpiles of ivory...

http://voices.nationalgeographic.com/2013/08/02/destroying-elephant-ivory-stockpiles-no-easy-matter/[

------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hold the piece in your hand and feel its weight. Ivory feels heavy and dense when you hold it in your hand. Think of the weight of a billiard ball, which ivory has been used to make in the past; when you hold one in your hand, it feels sturdy and solid. If the item in question feels strangely lightweight, you can eliminate the possibility that it's ivory. •Bone can have the exact same weight as ivory, so just because the piece feels solid and heavy doesn't mean it is indeed ivory.
•If you're unsure whether the item feels appropriately solid, weigh it, then compare its weight to similar items that you know to be ivory. The internet is a great resource for finding the dimensions and weight of ivory items.

Run your fingers over the item to feel its texture. Ivory is said to be as smooth as butter. It's not as soft, but in the right hands it's almost as easy to carve. If the surface of the piece feels rutted and pockmarked, it might not be ivory. If it feels unbelievably smooth, you may have ivory on your hands.

Tell Ivory from Bone
Examine the item's patina and surface through a magnifying glass. It's not always possible to tell for sure whether an item is ivory by looking under a magnifying glass, but doing so should provide good clues. Real ivory is lustrous and beautiful, often with a slightly yellowish hue. It can also take on a brownish patina caused by the oils of those who have handled it over the years. If you see spots or other odd markings, though, it probably isn't ivory. Look for the following identifiers:

•Cross-hatched lines. There should be parallel lines (with slight irregularities) running along the length of the item. Perpendicular to these should be circular or V-shaped lines known as Schreger lines. These are found in all elephant and mammoth ivory.[1]
•Does the surface have multiple darkened dots or pits? If so, this is a very good indicator of its being bone. In some cases the bone has been bleached, though, so keep performing other tests to be sure.
•All bone has the telltale flecks of marrow, or tiny notches, in the surface. These may not be visible to the naked eye, but you should be able to see them through a magnifying glass. Ivory tends to be smoother, harder, and not pitted

Heat a straight pin. Hold it over a candle flame or a lighter flame for a few seconds until it gets quite hot. You can use any piece of metal, but a pin is a good choice since you don't want to create a mark on the item you're testing.
Hold the pin to the surface of the item. Choose a discreet spot so you don't end up leaving a mark or a dent (although if the item is ivory, this won't happen).
Smell the place where you touched the item with the hot pin. If the item is ivory, it should have no scent that wasn't there before. If it's bone, it will smell faintly of burning hair. •True ivory will not get damaged by this experiment, since it is hard and strong enough to resist the heat. However, if the object you're testing happens to be made of plastic, the hot needle will make a slight dent. Since some plastics (such as Bakelite) have as much or more value than ivory, you may not want to try the hot needle test until you know for sure that what you have is not plastic.


Have the item chemically tested. To leave absolutely no question about the composition of your ivory or bone item, take it to a forensics lab and have it chemically tested by a scientist. The cellular structure of ivory is different from that of bone, but lab equipment is required to determine which is which with finality.
 
Last edited:
Heat a straight pin. Hold it over a candle flame or a lighter flame for a few seconds until it gets quite hot. You can use any piece of metal, but a pin is a good choice since you don't want to create a mark on the item you're testing.
Hold the pin to the surface of the item. Choose a discreet spot so you don't end up leaving a mark or a dent (although if the item is ivory, this won't happen).
Smell the place where you touched the item with the hot pin. If the item is ivory, it should have no scent that wasn't there before. If it's bone, it will smell faintly of burning hair. •True ivory will not get damaged by this experiment, since it is hard and strong enough to resist the heat. However, if the object you're testing happens to be made of plastic, the hot needle will make a slight dent. Since some plastics (such as Bakelite) have as much or more value than ivory, you may not want to try the hot needle test until you know for sure that what you have is not plastic.[/COLOR]

Now THAT makes sense to me. No scent or smoke from the hot needle = Ivory. Thank you Sir!
 
Yes.


But to test every white part (inlays and rings) you are likely going to ruin the finish at a minimum.


Easy enough to test the joint face.....but every inlay? Not applicable to every cue of course.


It's not really reasonable.



And as for laboratory testing, they would need to take a sample. Again, ruining at least the finish, most likely more.


Again, not really reasonable.



.
 
Back
Top