James White Specs
https://forums.azbilliards.com/showthread.php?t=447193&highlight=james+white
So, when I posted this old link of my James white, I got a ton of PM's asking this and that about the cue. I was tied up most of Sunday in a 6.5 hour one pocket match and sunburnt on top of it all. Long story short, I was wiped out last evening so I thought I would post the specs. for this cue. I also want to give the OP first shot at this cue since it is their thread. I don't need to sell the cue and am fine with keeping it.
The main reason I bought this cue is because my Tascarella is bumperless and where I was playing Leage every week has wood floors. So bascially, I needed this cue to keep from messing up the Tascarella. The White hits and plays great and I give up anything between either cue.
Butt-29", 15.8 oz. w/.6 oz wt. bolt, the brown bumper with allen screw is .4 oz., 5/16 x 14 SS joint with Szam. styled rings. The nose is BEM and the point wood as well as the butt sleeve is nicely grained Cocobolo. Each of the 4 points have 4 veneers of black/orange/green/white from outside to in. The wrap was installed at this year's DCC by Blackburn cues and is not white with brown spec Blue Mountain to better match the Cocobolo in this cue. The finish is still super nice, no dings ,scratches, dents to note, there are super tiny chips on the underside of the butt cap, not a big deal at all. The butt rolls perfect on my Diamond Pro.
Shaft 1-Playing shaft, 29", 4.0 oz., ivory ferrule, 12.88 mm, rolls close to perfect
Shaft 2-Like new, 29", 4.0 oz., ivory ferrule, 12.96 mm., slight, I do mean slight, roll, most would consider it straight.
I don't remember what tips are on either shaft, I think Ultraskin M.