More Gun Drills, 3 options

O

olsonsview

AzB Silver Member
Silver Member
I have finally received smaller shank gun drills, machined by a local shop. I have three options available:
#1 UnMachined, these have a 25 mm shank and can be used as
is, in a 1inch boring bar holder, or remachined by U

#2 3/4 inch shank with the rear port tapped to 1/8 pipe thd and
air fitting installed.

#3 1/2 inch shank with the rear inlet plugged, and a side port air
fitting installed for use on a Cuesmith Deluxe or
similar cue lathe (see photos for actual use)

These are all 18mm diameter by 13 inch cut.
I have a couple of each available, then I am out of the drill business ... I have avoided spamming you guys until I had them ready to ship.
PM me with any questions or orders, thank you for your patience... Lou. DSCF0153.jpg

DSCF0154.jpg

DSCF0155.jpg

DSCF0156.jpg
 
Happy Easter everyone !

Wanted to bump this and say hello to all.
I have sold a few drills since I reposted this. Still have at least one of each option. Message me if you have the need for a new 18mm X 13 inch cut gundrill. I believe you will love the quality as well as the reasonable price. thank you . . . Lou.
 
Please be patient guys!

I have sold the two drills with the 1/2 inch shanks (Option #3), and will further machine the remaining stock to 1/2 inch diameter, and make them Option 3 drills. I have to get them ready to ship to you. I will need some days to get the shanks turned to 1/2 inch and the side, and rear inlets bored and tapped. If you need something in an air inlet fitting besides the standard "D" industrial which is commonly used by the auto mechanics, then let me know. If it costs more, I will just add the costs of the fitting.
I contacted the man that sold me these drills, and he said he knows where more are stored. I should have no problems filling orders so please do not worry. He laughed and said he had the feeling I would want them all, so he did not wholesale them when he closed shop.
The only thing I ask is to Paypal me the money for Option #3 which is $85, includes Priority shipping and paypal fees in the continental USA, and that will ensure your place in line. I will ship them as soon as I can machine them in batches and get them ready. I have sold dozens of these and I know many can attest to my service, quality, and ethic so have no worries. If I oversell, I will refund the money sent including any paypal. But so far I have all covered for sure, just be patient. I had no idea I would sell a record amount today, go figure?
I thought it was going to be a quiet Sunday holiday.
My paypal is: lsolszewski@yahoo.com
 
All gone

I have enough to fill orders that I received up to this point, and can get no more drills. The drills my friend said he had seen were empty tubes! Sorry to anyone that wants a drill, but I sold all of them.
I do have enough to fill orders for all that sent me paypal, but that is it, I only have one left for myself. There is a fellow AZer (hangemhigh) selling 20mm diameter drills here that are a deal for the quality, but a bit larger in diameter than mine. If that works for you, please look him up, he is good people. I think he still has drills to sell. I can personally attest to their quality, a well made drill. Not sure if he offers 1/2 inch shanks, but ask him.

PLEASE DO NOT SEND ME PAYPAL MONEY, I CANNOT FILL ANY MORE ORDERS . . . SORRY !!!
 
Last edited:
Life's Surprises

There will be a delay in machining the last three gun drills. I was rushed to the ER yesterday early morn. I am undergoing tests to determine whAt is wrong. But held captive in this hospital for now. My son loaned me his IPad to write this. I hope you can be patient with me? I will resume work ASAP. Sorry for the inconvenience to you . . . LOU.
 
Good Lord, Lou.
What is up with peeps getting sick lately?
You guys are scaring me.
Please take care .
Those are damn nice drills .
Gun drills can be cuemakers' best friend often.
They open up so many possibilities .
 
Get Well...

Lou,

I am eager to get my gun drill, but your health is much more important than a gun drill. Get well... I will still be here when you are healed up and able to get my drill machined.

Take care,

Spencer


olsonsview said:
There will be a delay in machining the last three gun drills. I was rushed to the ER yesterday early morn. I am undergoing tests to determine whAt is wrong. But held captive in this hospital for now. My son loaned me his IPad to write this. I hope you can be patient with me? I will resume work ASAP. Sorry for the inconvenience to you . . . LOU.
Click to expand...
 
Lou, Sorry to hear of your health. Hope The tests show nothing too serious, and recover is a fast one..

Greg
 
Hello to all

TY for the well wishes, and many PMs. I am finally home and feeling better. I expect to resume my normal routine soon. Sorry again for any delays. Reminds me of what an old woman once told me: " Man makes plans, then God does whatever He likes!"
 
TO all that I have accepted prepay money for drills

I have finished the machining work as of this afternoon. I will package them up and ship sometime tomorrow to you by Priority US Mail as promised. TY for your patience.
To all those that keep trying to send me orders: I appreciate your perseverance, but I have no more 18 mm drills in stock. I tried to get more and there were none. I do have some odd size gun drills from time to time, and have a couple now, but no more 18 mm. I have a 3/4inch ( 0.752 inches diameter)used gundrill: 12.6 inch max depth of cut for sale. And a 0.6102inch diameter(yes, 0.0023 inches under 5/8) very long (18 inch cut) drill in stock. I try to maintain odd sizes of gun drills on hand but I am running low due to high demand. I also have a few oddballs still. Message me with a wish list. . . Lou.
 
You must log in or register to reply here.
Back
Top