Need advice getting my first break cue :)

briskx

AzB Silver Member
Silver Member
Yo all

I've been playing pool for a few years now and recently I bought a Lucasi E-7. Maybe that can tell you how much i know about pool and maybe at what standard I'm at. I can't help but feel bad when breaking with my playing cue as I'm sure its not good for it and I just want a proper break cue. Also what weight do you recomend, i can't remember what i got in my Lucasi, think i got 19 oz.

Don't know if anyone can recomend anything or explain to me whats so difference about a break cue and all the different technology in it.

I was looking at a 'Spark' cue, seems in my price range, i don't really want to spend more than $100 or so.

http://cgi.ebay.co.uk/Spark-Break-C...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262

Thanks for any help.

P.s I live in the U.K.
 
Last edited:
I used to have one of these cues and for the money there a decent cue. ( In fact i think i sold it to your brother)

The other one i would recommend is a J&J J/B cue. Theres a couple of people here on the board who sell them. I think the sell for something like $60.
 
deep said:
I used to have one of these cues and for the money there a decent cue. ( In fact i think i sold it to your brother)

The other one i would recommend is a J&J J/B cue. Theres a couple of people here on the board who sell them. I think the sell for something like $60.

ha yeah he still has it. Would a J and J be better than and Spark then?
 
Check out Proficient Billiards.com. They offer a modified Players JB for a low price that hits real well. I advise you have them put a white diamond tip on it for you, as I think it'll give you better "grab" than the one they normally use. They're real good folks & are well respected.
 
Last edited:
mdavis228 said:
Go to Proficient Billiards.com. They offer a modified Players JB for a low price that hits real well. I advise you have them put a white diamond tip on it for you, as I think it'll give you better "grab" than the one they normally use. They're real good folks & are well respected.

That is a smart advice ;)
Also you can get one hell of a break cue done by Gold Rush:

http://forums.azbilliards.com/showthread.php?t=123956
 
I bought a J&J j/b and it works very well for the money. In fact, I bought a BK2 recently so I can give you a direct comparison.

I would say you get most of the performance for 20% of the price.

The hit is a bit different between the two. The J&J has a stiff feel with the traditional phenolic sound & hard hit. The BK2 doesn't feel as stiff and sounds & feels like a leather tip.

I can't say I saw a notable difference in speed with the BK2 (for the same effort), but the J&J has less margin for error. That's the predator technology in action..and what you pay the extra $$$ for.

If I mis-hit with the BK2 the CB still hits the head ball solidly. The CB would bound off the table with the J&J. This allows me to strike the CB harder with the BK2, so from that perspective its "faster".

Although I'm keeping the BK2, I've kept the J&J jump portion in my case because it is a PHENOMINAL jumper! I make a lot of balls with it. It's more than paid for itself.

.
 
Last edited:
Also what weight do you recomend, i can't remember what i got in my Lucasi, think i got 19 oz? And any word on Gino cues?
 
I saw this posted by someone else a couple weeks ago, and have been looking at getting one myself, if I don't win the Brianna jump/break cue naming contest. :o

J&J Cues has the 4414 on "closeout sale" for $65, with free joint protector, and a cue bag per request. Per the description: ...a Canadian maple shaft with leather tip installed. (you may request to upgrade to a break shaft with phenolic ferrule and tip) Retail Price: $100, Closeout Price: $65"

I emailed them, and was told they would trade out the existing shaft and replace it with either a J&J XS/SB-1 Spark Break shaft (piloted) or a J&J XS/BK-18T Break shaft (flat face; both with Break cue taper, ferrule, & "super hard phenolic tip"), worth $30, at no additional cost, AND they'd discount the price to $50.

One of the guys where I play regularly has one, and I used it a couple times. Definitely seems worth the money IMO.

Heh...just checked out that eBay auction link, and I recognize that shaft. The J&J 4414 the guy @ my local pool uses, he has the "Spark USA" shaft, so I assume he bought the Spark break shaft to put on the J&J 4414 jump/break cue. Good combination, I've liked it when he let me use it.
 
Last edited:
For the question on weight, that is a hotly debated topic with a thread (http://forums.azbilliards.com/showthread.php?t=123808) on this right now. Basically though it all comes down to what works best for you. That's one reason I went for the Spark Break as it comes with bolts to go from about 18-21oz (more or less). Mine with no bolts is around 18.5oz and an even 19oz with the smallest bolt in it. I can mess around with the weight a bit until I find what I like the best.

I went with the Spark Break as it is a dedicated break cue. I don't jump the ball ever and even if I did, the majority of my play is in APA leagues which doesn't allow breaking down a J/B or even the use of a short jump cue. So, instead of having to deal with the 2nd joint in a J/B I went for a dedicated breaker.

But, it all depends on what you're looking for.

Brian
 
I have a Kaiser jump break(less than $100). I like it better than any Iv'e tried, and Iv'e tried many in the $300 range. It's beat to crap, but still jumps and breaks great.
Don't spend alot of $, and make sure you get a Jump/Break combo. otherwise you'll be wasting $.
-jeff
 
briskx said:
Also what weight do you recomend, i can't remember what i got in my Lucasi, think i got 19 oz? And any word on Gino cues?


As for the weight of your break cue, I recommend you get the same weight as your playing cue.
I love light weight break cues, but my current playing cue is 19.2 oz's. And everytime i changed over from a light weight break cue, under 18 oz's, my playing cue felt like it was loaded with lead and threw my game off. So now i stick with a break cue that is the same weight as my playing cue.
Just something to think about.
 
OK ive been playing with the JandJ jump break for along time now ever since it came out actually. and i love it you get a great jump cue and break cue for a minimal price. also as far as weight i like a very light cue for everything my playing cue is 17.5 and my break cue is 17 and i destroy the balls with it. ive actually cracks and aramith cue ball in half once.

but all of this is personal opinion remember diffrent stokes for diffrent folks.

and you can pick up a Jand J for 60 bucks and if you dont like it sell it for 50 to a friend you re4ally wont be out anything.

Just my opinion.
 
I break with a MEZZ BK I with deep impact shaft and it does pretty good job. I wonder why there is no review on GINO FERRARI...
 
starburst said:
I break with a MEZZ BK I with deep impact shaft and it does pretty good job. I wonder why there is no review on GINO FERRARI...

i think that cue is more popular in asia (gino ferrari that is) over here in the states i see more hammerheads
 
any cue

there are break cues by predator, and mezz, even gulyassy (sledgehammer) that I would rate the best out there, then you have otheres like the cheapies you're talking about. If I were you, I and I played nine ball or eight ball, and nothing but, I would definitely look into buying a good break cue and spend the money.

I only thing is this. What kind of player are you? How refined and accurate is your stroke to deliver into the cue ball and break the balls with a significant amount of consistent force? You've gotta think about this first before determining that you even need a break cue. I don't even use a break cue and it is just fine on my playing cue. I don't hammer the balls, and don't need to, as I have refined my game to the point where I'm hitting that head ball with accuracy and not so much power. Besides, it's just the tip you're really effecting, and if you're using Triangles, milk duds, or equivalent to, you're gonna be fine. Learn how to condition your tip and learn how to play the game correctly and spend time looking at some different, quality products before making a decision.

If, after reading this and your intention is to buy something cheap, get an eliminator from Troy KOINNKID for $150. It's got an OB1 shaft on it. Put a phenolic tip on it, and you got yourself either a great player, or a great break stick depending on what tip you put on it.

Good Luck, mate.
 
Just a quick one. I own a J&J J/B, a GF break cue, a GF jump cue, a BK2, and a recently aquired Andy Gilbert J/B( which i haven't had the chance to try). I've tried Spark break, PB1, and a few others.

The J&J really has the most bang for buck. It jumps relatively easily, and breaks realitvely effortlessly. My main break is still the BK2, which breaks fantasticly with little effort. Something that i really like in a break cue. The ability to impart spin into the break is also easily done.

The GF comes with either the phenolic tip and the G10 tip. The phenolic tip does not work very well as a jump for me, but does a pretty good job at breaking. It's about par for me in comparison with the J&J. The G10 tip breaks well, but with more need for a better stroke. It jumps like a bunny with a dart stroke.. makes jumping a whole lot easier, down side is it kinda does damage the ball a little.

I'm currently considering getting either the new tiger break tip or the white diamond for the Andy Gilbert, any recommendations?
 
Back
Top